Electrical Contactors

Hybrid Contactor supports high-frequency testing.
Electrical Contactors

Hybrid Contactor supports high-frequency testing.

Used for testing high frequency semiconductors in high-volume production, mmWave Contactor combines traditional spring probe architecture for low frequency and power I/O’s with cantilever solution for peripheral high frequency transceiver I/O’s. Keeping interface from test equipment to device as short as possible while minimizing number of transitionsÂ- enables broadband performance from...

Read More »
Electrical Contactors

High Current Contactor is intended for strip test.

Tested to provide >99% first pass yield and contact pin life span of >1 million insertions, Multitest High Current Strip Contactor addresses high power carrying capability and limited space inÂ- high parallel test set up. This high power Kelvin contactor for strip test is based on ecoAmp Cantilever design and optimized for electrical performance and temperature accuracy.

Read More »
Electrical Contactors

M2M Module Test Sockets and Contactors

Munich — Yamaichi Electronics presents test contactors for Machine-to-Machine (M2M) modules. M2M modules allow the interconnection of electronics apparatus and enable automated communication to provide wireless control and real-time monitoring. The M2M modules can manage global positioning and data transmission in industrial, consumer and automotive products. For testing such modules, Yamaichi...

Read More »
UL 508 General Use Approval for Solid-State Contactors
Electrical Contactors

UL 508 General Use Approval for Solid-State Contactors

MIDDLETOWN, Pa. – Phoenix Contact's CONTACTRON ELR 2+1 and ELR-3 series of solid-state contactors have received UL 508 General Use approval. The new approval complements the Solid-State Motor Controller approval these products already possess and permits them to be used in resistive and heating-load applications, in addition to across-the-line motor-starting applications.Â-  The...

Read More »
Electrical Contactors

GIGAVAC's P115 MiniTACTOR(TM)

The UL Certified Solution for Rapid DC Shutdown in PV Systems Carpinteria, California, USA – Just drive down any street and you will see an ever increasing number of photovoltaic, PV, panels on the roofs of homes and businesses. Along with the increase of these solar PV systems is an increased concern for the safety of those who come into contact with the high voltage portions of these systems....

Read More »
Electrical Contactors

Solar PV Components target 1,500 Vdc applications.

Intended for use in solar PV applications, 1,500 Vdc-rated components include such products as disconnect switches, molded case switches, contactors, surge protective devices, and voltage/current sensors. Some components are rated up to 3,000 A at 1,500 Vdc and carry various UL and/or IEC certifications. All are designed to meet development trends towards large-scale, 1,500 Vdc utility power...

Read More »
Electrical Contactors

Future Electronics Offers the DRC3 Series of Solid State Contactors from Crydom

Pointe Claire, QuebecÂ- – Future Electronics, a global leading distributor of electronic components, offers Crydom's DRC3 Series of solid state contactors. The Solicon DRC3 Series are solid state contactors intended for frequently switching on and off three phase loads up to 5 HP, 480 VAC 7.6 Amps. They are available in both contactor versions and reversing contactor versions. The...

Read More »
Definite Purpose Contactors are offered with ratings up 90 A.
Electrical Contactors

Definite Purpose Contactors are offered with ratings up 90 A.

Featuring screw terminals,Â- GDP Series includes 1-pole, 1-pole with shunt, and 2-pole configurations with max ratings of 25, 32, or 40 A. There are also 3-pole configurations, which offer lug terminals and max amperage ratings of 25, 32, 40, 50, 60, 75, or 90 A. Operating up to 104°F, with de-rated specifications up to 158°F, products feature 24, 120, 220, 277,...

Read More »
DIN Rail Enclosure Linking System hastens installation of boxes.
Electrical Contactors

DIN Rail Enclosure Linking System hastens installation of boxes.

Designed for 7.5 mm high top hat TH35 DIN rail assemblies, RAILTEC-BUS system accelerates and facilitates linking of DIN rail enclosures that share same power and signal connections. Modular system includes PA-molded bus support rail; bus PCB with 5 copper conductors (63 V, 5 A max); PA rail cover; PA PCB/bus connection block with PCB pins and 5 gold-plated connection springs; as well as left-...

Read More »

All Topics