Electrical Connectors

Connectors are available in threaded mate or snap-on.
Electrical Connectors

Connectors are available in threaded mate or snap-on.

SMB/SMC Series Subminiature Coaxial Connectors are machined from brass, gold plated to resist corrosion, and have beryllium-copper female contacts and Teflon® insulators. Providing service life of 500 matings, 50 Ohm connectors are rated for 750 Vrms dielecric withstanding voltage and operating temperature from -65°C to +165°C. Frequency range is 0 to 4 GHz for SMB Series and 0...

Read More »
Electrical Connectors

Card Connector supports 10 Gbyte Ethernet standard.

70-pin pcb-mounted edge card connector supports 10 Gbyte family of Z-axis pluggable transceivers. It offers alignment posts for stable placement on pcb and standoffs for pcb post-solder cleaning. SMT design provides option for connector placement on either side of pcb. Connector will support all of transceiver variants noted in MSAs (850 Nm serial, 1310 Nm serial, 1310 WWDM and 1550 serial...

Read More »
Stacked D-SUB has three mounting options.
Electrical Connectors

Stacked D-SUB has three mounting options.

PC99-colored D-SUB with plastic bracket is used with motherboards using ATX or Micro ATX configurations. It is available with parallel port atop two serial ports or one serial port and one VGA connector. It is also available with parallel port atop single serial port, which can be either left or right aligned. D-SUB is made of UL 94V-0 rated PBT thermoplastic; contact material is phosphor bronze...

Read More »
Circular Plastic Connectors accommodate 24-30 AWG wire.
Electrical Connectors

Circular Plastic Connectors accommodate 24-30 AWG wire.

Micro CPC connectors accommodate 2 to 7 contact positions for wire-to-wire, wire-to-board or wire-to-panel installations. Design incorporates a high reliability contact system suitable for use in industrial and instrumentation applications. Spring probe contact technology provides redundant internal current paths when exposed to vibration, motion and mechanical shock. It typically provides up to...

Read More »
Push-On Coax Connector terminates cable.
Electrical Connectors

Push-On Coax Connector terminates cable.

Designed for commercial and residential applications, EZ Twist requires no tools or crimping. To terminate, twist connector onto cable for secure connection. Device eliminates screw-on connections to outlets by pushing connector onto outlet to lock in place and pulling to remove. Straight push-to-lock method is used in high-density installations like home cabling enclosures, where space for...

Read More »
Power Supply Connectors are DeviceNet compliant.
Electrical Connectors

Power Supply Connectors are DeviceNet compliant.

HR31 Series power supply connectors are offered in 5 positions and in 5.08 mm pitch. Through-hole type headers are available in both straight and right-angle versions and contacts are available with solder or gold plating. Low height of 10.2 mm allows for high-density mounting. Connectors are supplied with 2 forms of locking: snap-lock, and permanently attached self-aligning screws (on plug) and...

Read More »
IDC Systems are available in various sizes.
Electrical Connectors

IDC Systems are available in various sizes.

FFSD Series IDC system features contacts on 0.050 in. x 0.050 in. pitch and is available in double row designs. Assembly measures 0.200 in. tall and includes 4-finger Beryllium Copper contacts with 10 to 25 positons per row. Notch polarization is standard. TCMD Series system features contacts on 0.0787 in. x 0.0787 in. pitch with square Phosphor Bronze pins and 2 to 25 positions per row. TCSD...

Read More »
Male Connectors are designed for use in backplanes.
Electrical Connectors

Male Connectors are designed for use in backplanes.

Type D Vertical Male Connectors are 8+2-row x 25-position headers that provide up to 220 signal contacts evenly distributed on 2 mm grid. They are UL approved and comply with requirement of IEC 917 and IEC 61076-4-101 specifications. Featuring multipurpose center incorporating pre-alignment guides, connectors feature press-fit design for gas-tight connection to PC board and are available in a...

Read More »
Plug End fits appliances and assembles easily.
Electrical Connectors

Plug End fits appliances and assembles easily.

Pre-molded 10-12 AWG Male Bridge provides three-prong plug end for large and small appliance power cords, power tool cords and extension cords. It allows 3 electrical terminals to be crimped at once on assembly line for fast loading of plug overmolds Bridge is available in black or natural nylon. Optional seven-shape blades have retention ledge to maintain firm position during plug molding.

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics