
New Amphenol RF 12G High-frequency BNC and HD-BNC Connectors Available in Cable Configurations and PCB Configurations with Edge-mount, Straight and Right-angle Options
Optimized for 4K high-definition video and provide fully intact signal transmission via a single channel. Operating at 75 ohm these connectors offer an advantage over legacy BNC models that support only 3 GHz and require two to four channels. Designed for a broad range of 12G-SDI video applications, including digital A/V cards or routing systems, mobile broadcast, studio...
Read More »
New Bendable RJ45 Flex Connector is Rated for Electronic Safety and Security Applications
Offered in shielded and non-shielded versions with factory pre-set contacts. Accommodates multiple category sizes up to 9.0 mm with 24-22 AWG conductors. Certified for 10-Gigabit high data traffic, PoE+ rated and meets TIA1096-A, BICSI/ANSI D005 and ANSI/TIA-862-A standards.
Read More »
Yamaichi Introduces Field Assembled M12 Connector for 10 Gigabit Ethernet Applications
Features connector face that is complied with M12 X coding according to DIN EN 61076-2-109 standards. Offered in die-cast zing housing and meets protection class IP67 rating against adverse environmental influences. Designed for typical CAT.6A applications such as communication cabling of automation control systems.
Read More »
New SMP Product Line Operates at DC to 26.5 GHz and Ideal for High-frequency Blind-mate Applications
50 ohm straight jacks feature a thread-in bulkhead design with post contacts and a push-on coupling mechanism. Solder plug is optimized for 0.047” semi-rigid cable and is designed with an anti-rock ring for vibration resistance. Bullet adapter is designed to compensate of both radial and axial misalignment and available in 17.16 mm length.
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »
New Keystone Cat6A Jacks are Compliant to IEC 60512-99-001 PoE and RoHS Standards
Feature 50μ gold contacts and up to 750 mating cycles. Offered in multiple colors and can be used to replace worn out jacks or integrated into newer projects. Operated in -10°C ~ +60°C temperature range and meet Cat6A channel shielded and non-shielded performance up to 100 m.
Read More »
Amphenol Releases New 18 GHz N-Type Connectors with Single Body Construction
Designed for systems such as wireless infrastructure, military and industrial applications. The fully interchangeable interconnects make N-Type connectors to meet MIL-C-39012 standards. Offered with weatherproof interconnect, low VSWR and insertion loss ruggedized construction.
Read More »
Phoenix Offers FINEPITCH Board-to-Board Connectors That Enable Vibration-Proof Connection in Confined Space
Available in FP 0.8 and FP 1.27 series in 12 to 80 positions and are packaged on tape and reel. Compliant with RoHS and RoHS II standards and can handle currents and voltages up to 1.4 A and 500 V AC respectively. The 0.8-mm version supports high-speed data transmission up to 16 Gbps.
Read More »
New ezEX38 RJ45 Connectors Feature Integrated Patented Hi-Lo Stagger Load Bar, Allowing The Conductors to Pass Through The Front End
Designed for smaller cables and conductors typically found in Cat5e and smaller Cat6 cabling. TIA, TAA, RoHS, UL & FCC compliant connectors has insulation diameter ranging from 0.033" - 0.038" (0.84 - 0.97mm) and max outer diameter 0.290" (7.36mm). Features 50-micron gold plated contacts and solid/stranded 24-22 AWG.
Read More »
New 4751 Series Features Color Options in Black, Grey or White for Cluster Distinction of Multi-phases
Designed to provide ease of assembly in power distribution units and uninterruptible power supplies. IEC style F outlets for 2, 4 or 6 pack configurations are prewired between outlets for speed of assembly. cURus approved for 15 A at 250 VAC and certified by VDE and CCC for 10 A at 250 VAC.
Read More »
TE Connectivity Demonstrates 400G Connector and Cable Assembly Solutions at OFC 2019
High-Speed Solutions Enhance the Latest Datacenter Equipment Designs HARRISBURG, Pa., Feb. 26, 2019 /PRNewswire/ -- TE Connectivity (TE), a world leader in connectivity and sensors, will showcase a comprehensive lineup of high-performance connectors, sockets, cable assemblies and power solutions at the OFC 2019 conference held in San Diego on March 3-7. TE will show its innovative solutions...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »