Electrical Connectors

Electrical Connectors

Correct-A-Chip Adapter operates up to 210° C.

Series 350000-HT lead-free Correct-A-Chip adapter enables users to upgrade from DIP devices to SOJ or SOIC devices with no PCB rework or redesign. It is offered on .300, .400, and .600 in. centers with 14, 16, 18, 20, or 24 pins. PCB is .062 in. Polyimid, rated at 260°C, with copper traces on both sides. Pins are 360 1/2-hard brass alloy with tin-nickel plating.

Read More »
Ejector Headers mate with .050", .100", and 2 mm cable systems.
Electrical Connectors

Ejector Headers mate with .050", .100", and 2 mm cable systems.

EHF Series double row surface mount ejector headers on .050 in. pitch are available in 7 pin counts from 10 through 50 pins. Mated height is .445 in. above board. EJH Series surface mount and through-hole ejector headers on .100 in. pitch come in 6 double-row pin counts from 10 through 50 pins, with mated height of .665 in. EHT Series surface mount, through-hole and right-angle ejector headers...

Read More »
Connectors resolve space, mating, and assembly problems.
Electrical Connectors

Connectors resolve space, mating, and assembly problems.

Custom engineered connectors provide interconnectivity solutions for power and signal applications. Brackets, terminal blocks, male/female contact assemblies, machined metal base housings, DIN rails, shunts, and protective covers can be custom built to meet specific capacity and environmental requirements. They can also conform to IEC and military specifications and be UL listed.

Read More »
Locking Connectors feature push/pull operation.
Electrical Connectors

Locking Connectors feature push/pull operation.

Quick Disconnect Precision Locking Connectors are offered in two series: one conforms to Ingress Protection Rating Standards with specification rating of IP50, and other category conforms to IP68 watertight rating. There are 3 sizes in each group with pole count availability ranging from 2-27. Connectors are non-magnetic, non-conductive, and autoclavable with optional inserts. Each connector is...

Read More »
Connector provides Z-axis, board-to-board solution.
Electrical Connectors

Connector provides Z-axis, board-to-board solution.

SliderZ(TM) features .050 in. pitch and slide mating action, allowing user to mate or remove one pcb in Z-axis while leaving other pcb undisturbed. Featuring glass-filled polyester housing, connector is UL 94V-0 approved with operating temperature of -40 to 85°C. Current ratings are 1.5 A for 10-circuit connector and 1.25 A for 20 through 60-circuit units. Connector's .110 in. solder tails...

Read More »
Tiny Connectors stack small form factor boards
Electrical Connectors

Tiny Connectors stack small form factor boards

Micro pitch pin and socket connectors work in micro/miniature applications. Square terminals mate with dual beam Tiger Claw or single beam Tiger Beam contacts. The 0.0315 in. system includes FTE Series headers and AW Series stackers which provide board spacings from 0.0197 to 0.355 in. when mated with CLE Series sockets. The 0.0394 pitch system has FTM Series headers and MW Series stackers with...

Read More »
DC Electrical Receptacles install quickly.
Electrical Connectors

DC Electrical Receptacles install quickly.

Weather-resistant plugs and receptacles for vehicles have Slide-Lok(TM) locking ring for easy installation. Installer slides keyed ring past most of receptacle threads, until ring is flush against panel. Quarter turn engages ring onto threads. Models include: 12VRCTT Thin Terminal receptacle with 2 different-sized NEMA connection tabs to prevent misconnection; 2VPG2A 12 V plug fused at 2 A; and...

Read More »
SMB Connectors provide low mating and un-mating force.
Electrical Connectors

SMB Connectors provide low mating and un-mating force.

SMB Series 75-Ohm Connectors include plugs, right-angle plugs, and PCB jacks for frequencies up to 4 GHz. RSB-301-179, positive-locking plug uses spring-loaded collar that must be retracted before connector will un-mate. RSB-300-1-179 straight and RSB-310-1-179 right angle crimp plugs feature standard snap-on coupling with gold plated contacts and body. RSB-350-1, vertical, and RSB-355-1, right...

Read More »
TNC Connectors meet FCC Part 15.
Electrical Connectors

TNC Connectors meet FCC Part 15.

Crimp connectors satisfy requirements of FCC part 15 by reversing contacts within standard connector body. RP-1216-I connector has TNC male pin and interface dielectric in TNC female body, and RP-1202-I has TNC female contact and dielectric in TNC male body. Both RP-1216-I and the RP-1202-I crimp connectors are for use with 2TV-400, LMR-400-UF, WBC-400 and Belden 9913 coaxial cables. They are...

Read More »
Board Mount Plug withstands reflow soldering temperatures.
Electrical Connectors

Board Mount Plug withstands reflow soldering temperatures.

ELFB SMT compatible board-mount inverted header has European style 0.200 in. spacing, board-mounted solder pin headers, plug-like nose, and twin-beam plug contacts. Headers are available in vertical and horizontal styles, and with 2 through 20 positions. Individual headers can be dovetailed together to form longer assembly. Molded with high temperature glass filled polyamide, it is capable of...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics