Electrical Connectors

Kit contains 3.5 mm RF adapters.
Electrical Connectors

Kit contains 3.5 mm RF adapters.

RFA-4031-01 kit features 3 adapters, each with 50 ohm impedance. They are made of non-magnetic 303 stainless steel, with beryllium-copper contacts supported with bead configuration. Units operate up to 34 GHz. Female contacts feature 4-slot configuration, ensuring that pressure is distributed evenly during engagement of male pin. Coaxial connectors and adapters intermate with SMA and 2.9 mm...

Read More »
Locking Devices secure flat cables.
Electrical Connectors

Locking Devices secure flat cables.

Flat Cable Locking Plugs and Connectors allow flat cables to be terminated with conventional round cable devices. Devices have serrated terminal plates, contoured clamps, brass screws, ribbed positive grip housing surfaces, and Safety Grip(TM) external cord grip. Able to hold up to #10 gage flat cables, 20 and 30 A devices are available in 4-pole, 5-wire models and NEMA L2120 and L2130...

Read More »
SMT Headers utilize capillary action for strong joints.
Electrical Connectors

SMT Headers utilize capillary action for strong joints.

Custom-designed Surface Mountable Headers are available with pins missing at specified positions or with pins of different lengths. Capillary action of solder paste during reflow draws header down tightly to PCB, pulling it into proper position, and ensuring co-planarity. Header assembly is designed to move with PCB, reducing mismatch created by different coefficients of expansion of dissimilar...

Read More »
Electrical Connectors

Connectors fit screw type plugs and are weld friendly.

Sub D Type non-magnetic connectors are offered in 9-pin, 15-pin, 25-pin, and 50-pin versions. All have gold-plated stainless steel conductors, and are available as weldable or flanged units. Connectors are rated for temperatures between -269 and 460°C, dc voltages of 500 V per pin, current of 1 A per pin, and pressures up to 1,350 psig. Connectors have vacuum leak ratings of less than 1 x...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Ethernet Connectors designed for industrial environments.
Electrical Connectors

Ethernet Connectors designed for industrial environments.

Industrially hardened Han-Brid RJ-45 Ethernet connectors consist of standard plugs and jacks with hoods and housings that offer protection from water, oil, dust, and dirt. Connectors are rated for Category 5 transmissions. Two 10 A rated contacts are integrated into connector for supplying power to network, so only one connector is needed for data transmission and power. Assembly is performed...

Read More »
PCB Connector handles high speed communications.
Electrical Connectors

PCB Connector handles high speed communications.

FCN-260(D) MicroGiGaCN® board-to-board mezzanine connector series enables differential signal transmission of 3.125 Gbps over standard, FR-4 material. Right-angle socket is available in 12, 24, and 36 pairs. It has 0.75 mm signal-to-ground contact pitch, 1.5 mm signal-to-signal contact pitch, and 0.5 mm SMT lead pitch. Applications include data-link/LVDS in datacom/telecom, optical modules,...

Read More »
Quick Connect Receptacle is fully insulated.
Electrical Connectors

Quick Connect Receptacle is fully insulated.

PIDG FASTON brass receptacle features nylon insulation and copper support sleeve, allowing wire to bend in any direction without damaging insulation or conductor. It accepts .250 x .032 tabs and accommodates 22-18, 16-14, and 12-10 AWG wire ranges. Additional insulation helps prevent electrical shorts between terminals, while metal support sleeve provides wire support for applications subject to...

Read More »
Headers, Sockets, and Terminals provide 200 I/O in
Electrical Connectors

Headers, Sockets, and Terminals provide 200 I/O in

Four-row surface mount FourRay(TM) headers and sockets (TOLC/SOLC Series) offer board stack heights of .250, .315, .394, and .472 in. SOLC series socket construction offers tuning fork style Tiger Buy contacts. FOLC Series socket construction offers 3-finger Beryllium Copper Tiger-Eye contacts. MOLC Series connectors are available in pin counts from 20 to 50 positions in multiples of 5 per row...

Read More »

All Topics