Dust / Fume / Mist Collectors

Dust / Fume / Mist Collectors

Dust and Fine Removal System optimizes molding process.

UsingÂ- patented, rotating tumbling process, sometimes with vacuum assist, Model 0308 DFS System removes dust, powders, and fines from regrind or virgin material at approximately 25 lb/hr. System was created for limited space environments and can be mounted press-side to current granulator system. Full accessibility with tilt-back cover facilitates servicing and...

Read More »
Fume/Dust Collector increases metal cutting application safety.
Dust / Fume / Mist Collectors

Fume/Dust Collector increases metal cutting application safety.

Supplied fully assembled and prewired, plug-and-play Farr Gold Series® Package (GSP) dust collector captures dust and fumes generated by CNC laser and plasma cutters. There are 3 models available to handle air flows from 1,000–3,000 cfm at 8 in. wg. Meeting or exceeding OSHA permissible exposure limits (PELs) on most metal dusts, models come with 2, 4, or 6 HemiPleat® eXtreme Gold...

Read More »
KEMPER at the EuroBLECH Fair 2014: Spotlight on New Extraction and Filtration Technology
Dust / Fume / Mist Collectors

KEMPER at the EuroBLECH Fair 2014: Spotlight on New Extraction and Filtration Technology

• Focus on MaxiFil, MaxiFil Clean and CleanAirTower • Contamination-free dust disposal protects workers • Systems go beyond legal requirements Vreden / Hannover, – Efficient extraction and filtration equipment for different welding situations: At the EuroBLECH Fair, KEMPER GmbH will showcase systems for optimal occupational safety to the metalworking industry. The MaxiFil, MaxiFil Clean...

Read More »
Cartridge Dust/Fume Collectors are built for usability, safety.
Dust / Fume / Mist Collectors

Cartridge Dust/Fume Collectors are built for usability, safety.

Gold Series® employs clamping system on door hardware that optimizes locking strengthÂ- while facilitating door closure. System increases compression leverage to 50:1 ratio when closing door, providing reliable seal with 6.5 psi standard strength. Utilizing laser-cut, welded-in clamp bar brackets to hold clamping bars to tube sheet, filter clamping system ensures...

Read More »
New Miniature Model Demonstrates Farr Gold Series® Dust Collector Features
Dust / Fume / Mist Collectors

New Miniature Model Demonstrates Farr Gold Series® Dust Collector Features

Jonesboro, Ark. – A new miniature model commissioned by Camfil Air Pollution Control (APC) provides a compact way to transport, display and demonstrate features of the company’s Farr Gold Series® dust and fume collector.Â-  Designed at one-tenth scale of a 16-cartridge dust collector, the model stands 18” (46 cm) high and will be used at trade shows and exhibitions, seminars and...

Read More »
Dust / Fume / Mist Collectors

Hydraulic Test Centers offer oil mist collector option.

Designed for testing heavy-duty, off-highway hydraulic components, Hydraulic Test Centers offer 3-stage Oil Mist Collector option for components with unconcealed rotating equipment that develop oil mist while under test. First impinger stage provides surface for mist to collect and then drip back to tank. Second and third stages ionize remaining mist, forcing contamination onto surface where it...

Read More »
Housekeeping and Recovery of Combustible/Conductive Dusts: A Big Step in the Right Direction
Dust / Fume / Mist Collectors

Housekeeping and Recovery of Combustible/Conductive Dusts: A Big Step in the Right Direction

Until today the certification of Hazloc Portable Vacuum Cleaners and Dust Collectors as per the Ex OSHA/NRTL system, the IECEx Scheme and the European ATEX system covers only the possibility to use the equipment in hazardous locations/areas in presence of combustible/conductive dusts, but does not cover the possibility to use the equipment to recover these dusts. Today we are proud to inform you...

Read More »
Dust / Fume / Mist Collectors

Vacuum Accessory keeps dust collection work areas clean.

By adding high-vacuum wand to low-vacuum dust collector, Clean SweepÂ- removes fugitive dust from around dust collector and adjacent work area and sends it directly to collector. Pneumatic vacuum pump, powered by same compressed air line that cleans dust collector filters, draws dust into collector through vacuum hose system. Accessory creates vacuum of up to 40 in. wg at 90...

Read More »
Dust / Fume / Mist Collectors

KEMPER Reveals Completely New Product Portfolio

•Ã‚- New products, new colours , new exhibition stand • Innovative products with unique dust extraction • Portfolio for all applications and budgets Vreden / Essen – When the curtain fell, everything had changed. Since the opening of the exhibition, KEMPER GmbH has been showing welding and cutting in a new guise. What appears at first glance to be a new colour scheme, logo or website,...

Read More »
Oil Mist Collection/Filtration System reduces energy costs.
Dust / Fume / Mist Collectors

Oil Mist Collection/Filtration System reduces energy costs.

Supplied in 16/18 gauge, zinc-coated, welded steel cabinet with powder-coated finish, MPH10 delivers MERV 14 filtration efficiency and produces up to 1,000 cfm air flow for industrial applications. Ultra-seal® filter placement system eliminates contaminant bypass of filters, while 10 in. bottom inlet and 2 in. deep sump support high-volume, 24/7 operation with no manual handling of liquid....

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics