Dimensional Measurement & Inspection Probes

Dimensional Measurement & Inspection Probes

Laser Design Announces Sale of Surveyor 3D Laser Scanning System to Polytechnic University of Madrid, Spain

(MINNEAPOLIS, MN; December 20, 2007) - Laser Design Inc., the leading supplier of 3D laser scanners for more than 20 years, announced the sale of a Surveyor CS-2822 3D laser scanning system to the Polytechnic University of Madrid in Spain. The Polytechnic University has served as the leading technical university in Madrid for over 25 years, and the history of its architectural and engineering...

Read More »
Dimensional Measurement & Inspection Probes

FARO's Exclusive SENSOR Probe by Renishaw Improves Productivity, Data Confidence

FRANKFURT, Germany, Dec. 5 -- FARO Technologies, Inc. (NASDAQ:FARO), the world sales leader in portable computer-aided measurement arms and laser trackers, announced that its strategic alliance with Renishaw has produced the FARO SENSOR, an advanced probe for measurement arms that increases user productivity and confidence in results. What makes the FARO SENSOR probe unique is that data is taken...

Read More »
Laser Design and GKS Inspection Services Expand 3D Laser Scanning Capacity Dramatically with Wenzel Systems
Dimensional Measurement & Inspection Probes

Laser Design and GKS Inspection Services Expand 3D Laser Scanning Capacity Dramatically with Wenzel Systems

MINNEAPOLIS, MN (November 20, 2007) - Laser Design, Inc., the leading supplier of 3D laser scanners for more than 20 years, and GKS Inspection Services, its in-house service bureau division offering dimensional inspection, 3D laser scanning, and terrestrial scanning services for over 25 years, have installed Wenzel CMM systems outfitted with Laser Design's high-speed ultra-accurate SLP laser...

Read More »
Dimensional Measurement & Inspection Probes

Optical Transmission Probe mounts on polymer extruders.

Designed to mount in Â-½-20 UNF pressure transducer fittings that are available on most polymer extruders, Model FPX-250 makes it practical to use near infrared spectroscopy for short-term analysis and troubleshooting as well as for continuous long-term polymer process monitoring. Unit is compatible with any size extruder and can be attached without requiring modification to existing...

Read More »
Dimensional Measurement & Inspection Probes

Laser Scanning Arm offers Bluetooth® operation.

Compatible with Platinum FaroArm and Quantum FaroArm portable CMM, and Geomagic, Polyworks, Rapid Form, and other 3rd-party software programs, Laser ScanArm v3 7-axis contact/non-contact measurement device can scan dark/reflective surfaces with 35 micron accuracy. When equipped on Quantum Series, users can scan up to 30 ft away without requiring cables or interface boxes. It is suited for...

Read More »
Gauging Probes suit limited space applications.
Dimensional Measurement & Inspection Probes

Gauging Probes suit limited space applications.

Available in 23.5 and 27.5 mm models, DZ Series Probes provide 1 and 2 mm measuring range, respectively. Transducers are sealed using Viton® boot to exclude dust and moisture and meet IP65 requirements. Tips with M2 thread are available for various applications and can be replaced in field without returning them to factory. Offered in digital versions only, probes facilitate setup since...

Read More »
Dimensional Measurement & Inspection Probes

AR Laser Probes Now Come Standard with an A2LA Accredited, NIST Traceable Calibration at No Extra Charge

Souderton, PA - 9/15/07 - AR RF/Microwave Instrumentation has announced that its family of advanced laser probes - Models FL7030 (5 kHz - 30 MHz), FL7006 (0.1 MHz - 6 GHz) and FL7018 (3 MHz - 18 GHz) - will now be offered with a NIST traceable calibration with A2LA accreditation at no additional charge. The company previously sold its laser probes with a NIST traceable calibration only, with the...

Read More »
Laser Design Laser Scanners Fully Integrated with Wenzel CMMs
Dimensional Measurement & Inspection Probes

Laser Design Laser Scanners Fully Integrated with Wenzel CMMs

MINNEAPOLIS, MN; August 17, 2007 - Laser Design Inc., the leading supplier of 3D laser scanners since 1987, announced that its ultra-precise, line-laser Surveyor Laser Probes (SLP®) are now fully integrated with Wenzel CMMs. This means that Wenzel CMM systems can be quickly and easily retrofitted with Laser Design laser scanning probes for exponentially increased speed in all types of...

Read More »
Dimensional Measurement & Inspection Probes

HEIDENHAIN Exhibits Place Machine Tool Accuracy on Center Stage at EMO

SCHAUMBURG, IL - (July 2007) - The HEIDENHAIN show at EMO in September (in Germany) stands under the motto HEIDENHAIN shows the way to precision". And besides offering numerous activities at or near the exhibition ground, visitors to the booth (Hall 25, Booth E18) will gain information on the accuracy of machine tools and its effects on the parts produced. Demo units and presentations will help...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers