Dimensional Measurement & Inspection Probes

Five-Axis Probe Head provides touch-trigger inspection of CMMs.
Dimensional Measurement & Inspection Probes

Five-Axis Probe Head provides touch-trigger inspection of CMMs.

Offering head touches for rapid touch-trigger measurement, Model PH20 provides infinite 5-axis positioning and integral TP20 probe mount that optimizes working volume of CMM, bringing 5-axis capability to smaller machines. Probe head minimizes CMM motion, reducing dynamic CMM errors. Able to determine head orientation and probe position in single operation, inferred calibration technique allows...

Read More »
Nitride Lever Probes enable high-resolution AFM imaging.
Dimensional Measurement & Inspection Probes

Nitride Lever Probes enable high-resolution AFM imaging.

Able to be used on any atomic force microscope (AFM), Sharp Nitride Lever (SNL) Probes feature tip that combines low spring constant softness of silicon nitride cantilever with sharpness of silicon tip. This results in radius of curvature as low as 2 nm. High resolution imaging in air and fluid is possible using Contact Mode and TappingMode(TM) operation, and there are 2 available configurations:...

Read More »
Dimensional Measurement & Inspection Probes

CMM Motorized Probe Heads offer 7.5° indexing increment.

Designed for compatibility with legacy products, TESASTAR-m and TESASTAR-sm work on Brown and Sharpe branded Coordinate Measuring Machines (CMMs). Heads deliver -180° to +180° of revolution and 0° to 105° of pitch for total of 720 indexable positions. Additionally, TESASTAR-sm offers in-the-quill mount to increase effective measuring range along CMM's Z axis. All products...

Read More »
IR Touch Probe for CNC Machines enhances productivity.
Dimensional Measurement & Inspection Probes

IR Touch Probe for CNC Machines enhances productivity.

Designed for use with numerically controlled machine tools, TT 449 unit can be placed anywhere on work table and is rated for continuous duty at 200 hr typ with included lithium battery. Design eliminates need for cable, increasing mobility for tool measurement and inspection directly on machine. Suitable for applications where unlimited movements are necessary, IP67-rated tool also has rated...

Read More »
Radio Transmission Probe is 1.57 in. dia x 2.30 in. long.
Dimensional Measurement & Inspection Probes

Radio Transmission Probe is 1.57 in. dia x 2.30 in. long.

Suited for multi-axis and mill-turn machines where line-of-sight between inspection probe and its interface can become obstructed, RMP40 touch probe brings automated job set-up and in-process measurement to range of machine tools and difficult applications. Frequency-hopping spread spectrum (FHSS) radio transmission pairs with Radio Machine Interface (RMI) and utilizes 2.4 GHz frequency band,...

Read More »
Dimensional Measurement & Inspection Probes

Touch Probes aid lathe and turning center setup/inspection.

Respectively offering choice of radio or optical signal transmission technologies, RLP40 and OLP40 facilitate lathe and turning center part setup/inspection. Products measure 40 mm dia x 58.3 mm long and provide uni-directional repeatability of 1 Â-µm. Both designs, hardened and sealed to IPX8, withstand extreme environments, and eyelid protection system prevents entry of swarf and chips....

Read More »
Powerful P.C. and Probe Upgrade Package Now Available for Gleason GMM Series Gear Inspection Systems
Dimensional Measurement & Inspection Probes

Powerful P.C. and Probe Upgrade Package Now Available for Gleason GMM Series Gear Inspection Systems

Rochester, New York - Gleason's GMM Series of Analytical Gear Inspection Systems now can be equipped with a powerful new Windows® based applications software suite called GAMA(TM) (Gleason Automated Measurement and Analysis), and the Renishaw SPH180 Probe, making GMM the fastest, most user-friendly inspection systems in their class. Both GAMA and the Renishaw probe system are available for...

Read More »
Lathe Inspection Touch Probes transmit radio or optical signals.
Dimensional Measurement & Inspection Probes

Lathe Inspection Touch Probes transmit radio or optical signals.

Model RLP40 lathe inspection probes operate in 2.4 GHz frequency band and combine FHSS radio transmission with machine interface to deliver continuous communication with probe. Using modulated optical transmission to resist light interference, OLP40 units have 360° transmission systems for probe to operate in any orientation. Both probes provide unidirectional repeatability of 0.00004 in....

Read More »
REVO® Retrofit Nets Higher Data Collection Rates
Dimensional Measurement & Inspection Probes

REVO® Retrofit Nets Higher Data Collection Rates

Scanning probe retrofit supercharges CMM data collection rates, allows form analysis Renishaw's REVO® system enables 4x reduction in impeller inspection times, additional data to be used to compare inspected surfaces with 3D CAD models. GE Oil and Gas Florence, Italy, has transformed the performance of a DEA Global coordinate measuring machine (CMM) with a REVO retrofit scanning probe...

Read More »
Dimensional Measurement & Inspection Probes

3D Touch Probe suits point measurements or CMM scanning.

Using non-contact sensors, Triskelion Tactile Probe System measures deflection of stylus when it contacts part being inspected. Measuring 8.5 mm in length, stylus is connected to flat leaf spring, which allows it to work in 3 dimensions with contact forces of less than 0.3 mN. Tiny 0.5 mm ruby tip enables system to probe and scan very small features, while embedded precision displacement sensors...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers