Device Driver Software

Device Driver Software

Low-Noise EL Drivers suit backlighting applications.

Designed for panels up to 4 in.Â-² or greater, MIC4830 and MIC4832 are, respectively, 180 and 220 Vpp low-noise electroluminescent lamp (EL) driver ICs that consume typical supply current of 45 µA. They utilize bipolar, CMOS, DMOS (BCD) technology and integrate boost converter. Also included, H-bridge driver eliminates audible noise by creating smooth ac waveform across EL panel....

Read More »
LED Driver Boards feature thermal management design.
Device Driver Software

LED Driver Boards feature thermal management design.

SFDL Series Smart Force(TM) board provides 180 mA max current to LED rails used in LCDs up to 12.1 in. diagonal, with on-board PWM dimming ratio of 1000:1 and external PWM dimming to 5000:1. Designed for high-power HBLED backlight rails used in LCDs up to 20.1 in. diagonal SFDC Series provides 1,000 mA max current and features internal/external dimming ratios of 1,000:1/20,000:1, respectively....

Read More »
Device Driver Software

LED Driver IC features current regulating switch.

Suited for LCD panel backlighting and DLP TV applications, Model HV9980 features 3 channels of peak current mode control, each with integrated 160 V, 25 W MOSFET and individual PWM and linear dimming inputs. All 3 channels also include short-circuit and over-temperature protection. Large array of HV9980 ICs can be synchronized to system clock to eliminate beat frequencies. Housed in 24-lead SOW...

Read More »
Device Driver Software

Linux Driver targets thin client users.

Designed for EpicA TC2 and EpicA TC4 multi-display graphics cards, Matrox v1.4.5 Linux display driver supports 32- and 64-bit RedHat and SUSE distributions, X.Org up to version 7.2.0, and kernel versions up to 2.6.20. Compatible with rdesktop 1.4.1 and Citrix ICA Client 9.x and 10.x for Linux, it features GUI application that facilitates multi-display configuration for HP t5725 thin clients...

Read More »
Device Driver Software

LED Driver offers programmable brightness control.

Featuring on-chip oscillator, A6281 3-channel constant-current LED driver controls brightness via 10-bit PWM per channel, complemented by 7-bit analog current control per channel to adjust color balance. It drives up to 150 mA per channel and operates from supply voltage of up to 17 V. Clock, serial data, latch, and output enable control signals are buffered on chip to drive next pixel in...

Read More »
Cell Phone LED Driver provides up to 250 mA output current.
Device Driver Software

Cell Phone LED Driver provides up to 250 mA output current.

Driving up to 9 LEDs, LTC3219 inductorless, low noise LED driver for cell phone displays and lighting features 2.9-5.5 V input voltage range with efficiencies of up to 91% when driven from 3.6 V lithium battery. IC provides 9 individually configurable current sources for Main, Sub, and RGB displays. Display currents are set via internal current reference and universal current sources can be...

Read More »
Device Driver Software

WLED Drivers target handset manufacturers.

Housed in 2 x 2 mm package, Model AAT3193 drives up to 3 LEDs at up to 30 mA each, while Model AAT3192 drives 2 LEDs. Model AAT3193 includes integrated thermal protection and automatic soft start. Supporting illumination of monochrome and opaque TFT LCD panels, both units offer part-to-part current accuracy better than 10% and channel-to-channel current matching better than 3%. Charge-pump based...

Read More »
Optek's LEDs Selected for Microchip Technology's Lighting Design Kit, Color-Control Software Solution and LED Driver
Device Driver Software

Optek's LEDs Selected for Microchip Technology's Lighting Design Kit, Color-Control Software Solution and LED Driver

Tunable, full-color RGB; 1W and 10W LED devices exhibit efficiency, high reliability... CARROLLTON, TX (June 28, 2007) - TT electronics OPTEK Technology's 6-pin PLCC LED has been specified by Microchip Technology Inc.'s [NASDAQ: MCHP] LED Lighting Design Guide and designed for use with their color-control software solution; while OPTEK's 1W and 10W Lednium devices have been selected as part of a...

Read More »
Device Driver Software

LCD Driver Chip supports QVGA resolution in mobile devices.

Capable of up to QVGA (240RGB x 320) resolution, cell phone LCD driver chip can be mounted on HD Low Temperature Polysilicon (LTPS) LCD panels. This driver IC has embedded controller offering Picture in Picture (PIP) and EEPROM memory to promote picture quality. Targeted towards high-end cell phone models, product supports 16 million colors as its default and provides interfaces that support GSM...

Read More »
Device Driver Software

Silterra Expands High Voltage Technology

Company shows leadership to meet demands of Display Driver Customers Kulim, Kedah (21st June 2007) - After the recent announcement of 90nm and 65nm technology plans, Silterra Malaysia, the leading foundry in Malaysia today announced the availability of 0.16Â-µm high voltage technology for mass production in Q3 this year and the roadmap to 0.13µm high voltage technology in the first...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers