Deburring Machines

Deburring System features return-to-operator configuration.
Deburring Machines

Deburring System features return-to-operator configuration.

Suited for applications requiring small footprint and portability, Tri-Ten series planetary head deburring system is designed to deburr both sides of part in single pass. Magnetic conveyor passes parts loaded at one end of system through offset planetary deburring head, where three fiber abrasive brushes deburr upward facing surface, after which part is carried to flipping mechanism and...

Read More »
Deburring Machines

Kennametal Extrude Hone Redesigned TEM S250 Machine

New Machine Design Showcases Technical Innovations and Promotes Greater Levels of Customization while Remaining Budget Friendly Irwin, Pa. (January 09, 2009)-In these uncertain economic times, Kennametal Extrude Hone offers customers interested in its distinctive Thermal Energy Method (TEM) technology the greatest value and production flexibility for the price point with the newly enhanced TEM...

Read More »
Deburring Station minimizes potentially flammability.
Deburring Machines

Deburring Station minimizes potentially flammability.

Wet Deburring Station uses wet filtration system to capture potentially combustible filings and dust in air/water mixing zone. By entrapping these particles in water, possible flammability is reduced. After pulling filings and dust through air/water mixing zone, material is disposed of as slurry. Model 64100 (21 x 20 x 36 in.) and Model 64100 (36 x 31 x 45 in.) feature tabletop design and can be...

Read More »
Centrifugal Disk Finisher eliminates hand deburring.
Deburring Machines

Centrifugal Disk Finisher eliminates hand deburring.

With small opening between spinning and stationery components at base of machine, Model ACDF-75 keeps tiny parts from disappearing during finishing process. Urethane-lined bowl does not require frequent relining, which saves equipment downtime. PLC-equipped for precision deburring, machine offers variable speed and is available in 4 sizes to accommodate varying part dimensions and batch...

Read More »
New Tube & Rod End-Finishing Machine from Manchester Tool & Die
Deburring Machines

New Tube & Rod End-Finishing Machine from Manchester Tool & Die

Manchester Tool & Die, Inc. now offers Pines Technology Model 660 Tube & Rod End-Finishing Machines for fast and simultaneous deburring, ID / OD chamfering, and facing. Model 660 includes two models, a manually operated and an air operated machine for finishing up to 1,500 ends per hour and 1,875 ends per hour, respectively. These end-finishing machines offer cost savings by freeing lathes and...

Read More »
Abtex Expands Its Short Part Deburring System Capability
Deburring Machines

Abtex Expands Its Short Part Deburring System Capability

Abtex Corporation has increased the maximum part length that its double-head, flow-through, short part deburring system can deburr. In response to customer requests and reported application requirements, this popular system can now deburr parts ranging in length from 1 inch to 7.5 inches. The maximum length had been 4.5 inches. With one pass, the new machine simultaneously deburrs both ends of an...

Read More »
Parallel Kinematic Machine offers 88.9 m/min rapid traverse.
Deburring Machines

Parallel Kinematic Machine offers 88.9 m/min rapid traverse.

Offering 5-axis interpolated machining, Tricept T9000 can perform milling, drilling, routing, deburring and finishing, optical inspection and touch probing, fastener/rivet installation, and friction stir welding. Each strut delivers 990 mm stroke, giving machining reach of metric/inch in both X and Y and metric/inch in Z. Equipped with 6,000 rpm, 50 hp HSK63 spindle, machine delivers ±0.038...

Read More »
Deburring Machines

Pencil Grinder offers high-speed cutting and deburring.

Featuring ergonomic, pencil-type shaft for operator comfort and control, air-powered, 100,000 rpm Pencil Grinder is turbine-driven with rear-exhaust and no wearable gears, vanes, or blades. Tool speed is adjustable with twist of on/off switch. Available with 1/8, 3/32, 1/16, and 3 mm collets, grinder includes stainless steel tool housing, ceramic bearings, and tactile cues on shaft end that alert...

Read More »
Deburring Machine performs 4 functions in one process.
Deburring Machines

Deburring Machine performs 4 functions in one process.

Suited for small to medium-sized workpieces that may be inherently delicate or intricate, CoolPulse 200(TM) electrolytic machine deburrs, polishes, stress relieves, and cleans in one finishing process. Machine can remove rough surfaces from 2.5-5 Â-µm Ra and produce smooth surfaces down to 0.1 µm Ra, providing bright or mirror-like finish on stainless steel and bright to matte finish...

Read More »
Deburring Machines

Abrasive Belt Tools suit heavy grinding applications.

Utilizing Â-½-2 in. wide x 30 in. long belts, air-powered Dynabelter Abrasive Tools are available in .7 hp Standard Duty, 1.2 hp Heavy-Duty, 2.0 hp Extra Heavy-Duty model with pressure bar and top control handle, and 1.2 hp Heavy-Duty model that includes Adjust-A-Wheel, which controls depth of abrasive belt cut. Adjust-A-Wheel allows for controlled grinding on flat surfaces without...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers