Cut-Off Machinery

Cut-Off Machinery

Horizon Industries adds an Engine Lathe and Automatic Saw

Horizon Industries, located in Columbia, Pa, has added two new machines to allow for larger shafts or pipes in short production runs.   The Clover Engine Lathe has a large thru hole (4 1/8") to allow for larger pieces of tubing, pipe and other metal parts in short production runs.  Because there is a very short set up time on this machine, we can take on customers with little notice,...

Read More »
Kennametal Extrude Hone and PEMtec Announce Strategic Alliance for Electro Chemical Machining
Cut-Off Machinery

Kennametal Extrude Hone and PEMtec Announce Strategic Alliance for Electro Chemical Machining

Kennametal Extrude Hone and PEMtec have signed an agreement to supply customers with precision electro chemical machining (PECM) technology. Through electro-chemical metal removal, PECM can shape complex geometries in practically all metals, e.g., in highly tempered steel, rolling bearing steel, powder-metallurgy steel, and super-alloys. PECM also taps applications that could not be feasibly...

Read More »
Flying Cut-Off Press offers flexibility via servo drive.
Cut-Off Machinery

Flying Cut-Off Press offers flexibility via servo drive.

Using servo drive, pneumatic flying cut-off press provides flexibility to perform stamping and roll forming operations as well as extrusion applications. Operators can stamp, punch, cut, or pierce variety of materials, including steel, aluminum, plastic, cardboard, and rubber. Servo drive also helps accelerate line speed.Â- Able to be used as part of stamping work cell or anchor...

Read More »
Cutoff System incorporates remnant reduction device.
Cut-Off Machinery

Cutoff System incorporates remnant reduction device.

Along with 15.5 hp induction motor that drives saw blade spindle via reduction gearbox, Nishijimax NHC-100ND Cutoff SystemÂ- comes with remnant reduction device to decrease amount of remnant in auto cycle. Feed rate is set automatically, input chip load is maintained via NC Saw Spindle Feed Axis, and constant torque is maintained throughout RPM range. Other features include...

Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Sponsored

5 Questions to Ask When Choosing a Custom Glass Manufacturer

Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.

Read More »
Rattunde Utilizes Precision Motion Control for Tube and Bar Production System; up to 11,000 Parts Per Hour Reported with Zero Rejects
Cut-Off Machinery

Rattunde Utilizes Precision Motion Control for Tube and Bar Production System; up to 11,000 Parts Per Hour Reported with Zero Rejects

Through the use of Siemens SINUMERIK CNC technology, plus PLC and HMI, on a combination servo-controlled cold saw cut-to-length and brush deburring system, Rattunde customer achieves triple the output on small engine exhaust components Rattunde Corporation of Grand Rapids, Michigan is the five-year-old subsidiary of Germany's Rattunde & Co. GmbH, a machine tool builder of tube, pipe and bar...

Read More »
imX Learning Lab Overview 1 MAG booths 2748 and 2762
Cut-Off Machinery

imX Learning Lab Overview 1 MAG booths 2748 and 2762

imX Learning Lab offers first in-depth look at patented cryogenic tool cooling that rewrites the book on machining of hard metals and composites Offers up to 10X longer tool life or up to 4X faster cutting in hard metals. Sets new standards for composites cutting, too. July 15, 2011 - MAG delivers on the promise of imX Learning Labs by providing the first in-depth look at the capabilities of its...

Read More »
Kalamazoo Machine Tool Model C315/350 Ideal for Tubes, Pipes, and Light Structural Shapes
Cut-Off Machinery

Kalamazoo Machine Tool Model C315/350 Ideal for Tubes, Pipes, and Light Structural Shapes

The Kalamazoo Machine Tool Model C315/350 Hinge-Type vertical column saw is designed for non-production applications requiring precise, accurate cuts in tubes, pipes and light structural shapes. The saw has a 14 (350 mm) blade, 3.5 HP motor, spindle speeds of 24-105 RPM with an Infinitely Variable option in single-phase, and two-speeds of 30 & 60 RPM in 3-phase operation. The saw can cut up to 4"...

Read More »
Makita Expands 12v Max Lithium-Ion Cordless Line-Up
Cut-Off Machinery

Makita Expands 12v Max Lithium-Ion Cordless Line-Up

La Mirada, Calif. - Makita, a worldwide manufacturer of technologically advanced power tools that are more compact with less weight yet deliver industrial strength power and results, has added to its groundbreaking line of cordless power tools with additions to the 12V max Lithium-Ion Cordless platform. The new releases include two driver-drills, an impact driver, circular saw, vacuum, and...

Read More »
Abrasive Cutter is optimized for sectioning applications.
Cut-Off Machinery

Abrasive Cutter is optimized for sectioning applications.

AbrasiMatic® 300 abrasive cutter features 12 in. abrasive cut-off wheel, able to section up to 4.375 in. dia sample, and 5 hp motor that powers through materials such as steel, metal, ceramic, and concrete. Measuring 34 x 27 x 23 in., unit has 2 stainless steel T-slot vice table beds and side hood door that slides open as hood is raised during sample placement. Optional X-Bed adjusts with...

Read More »
OMAX® Showcasing MAXIEM® JetCutting Center at HOUSTEX 2011
Cut-Off Machinery

OMAX® Showcasing MAXIEM® JetCutting Center at HOUSTEX 2011

Kent, Washington - MAXIEM Waterjets®, a division of OMAX® Corporation, will be showcasing the highly productive cutting capabilities of the MAXIEM 1530 JetCutting Center at HOUSTEX 2011. The company's booth, #1820, will feature a variety of cutting demonstrations on the industry standard abrasive waterjet machining center. HOUSTEX 2011 will take place on April 18 - 20 at the George R. Brown...

Read More »

All Topics