Heads, Cutters, and Holders offer exchangeable head coupling.
Machining Heads

Heads, Cutters, and Holders offer exchangeable head coupling.

Compatible with solid carbide heads, indexable milling cutters, boring heads, integrated machine adapters, and different shanks, Exchangeable Head Coupling is based on self-centering screw thread for secure mounting. Physical stop enables users to feel when head is correctly tightened and helps to not overstress clamping. Conical portion is shaped to provide best run-out, while pre-loaded taper...

Read More »
Directional Couplers cover 0.5-26.5 GHz frequency range.
Signal Couplers

Directional Couplers cover 0.5-26.5 GHz frequency range.

Featuring multi-purpose, stripline design, Models 152610, 152616, and 152620Â- exhibit nominal coupling (with respect to output) of 10 dB ±1.0 dB, 16 dB ±1.0 dB,  and 20 dB ±1.0 dB, respectively, with frequency sensitivities of ±1.0 dB, ±1.2 dB, and ±1.5 dB. Common to each unit is directivity of >13 dB, max VSWR of 1.45,...

Read More »
Zero Backlash Couplings offer optimized misalignment capacity.
Shaft Couplings

Zero Backlash Couplings offer optimized misalignment capacity.

With shaft spacing and clamping system able to accommodate demands of servo motor and motion control applications, Double Flex CD® A1C provides precise positioning under high-speed reversing loads without fatigue for 24/7 operation. Design exhibits torsional stiffness, allows for misalignment in high-stress applications, and provides smooth operation at high speeds. Depending on model, peak...

Read More »
Directional Coupler offers nominal coupling of 30 dB.
Signal Couplers

Directional Coupler offers nominal coupling of 30 dB.

Operating in frequency range of 4.0–20.0 GHz, Model 104020030 features frequency sensitivity of ±0.7 dB, directivity of greater than 15 dB, and insertion loss of less than 0.60 dB across full frequency range, including coupled power. Maximum VSWR at any port is 1.35 and power ratingsÂ- are 20 W average/3 KW peak. Measuring 1.40 x 0.40 x 0.66 in., stripline coupler operates...

Read More »
Tool Holders

Polygon Shank Coupling Size 100 (Coromant Capto® C10) Added to ISO/DIS 26623 Standard

In 2008 the ISO/DIS 26623 standard was created for ‘Polygon taper interface with flange contact surface’ to secure the original design of Coromant Capto – this covered flange sizes 32 to 80 (C3 through to C8). In July 2013 the ISO committee agreed to add polygon shank size 100 (C10) to the existing standard. Coromant Capto is developed to cover 3 distinct application areas:- • Integrated...

Read More »
Signal Couplers

Audiometric Couplers enable insert earphone testing.

Designed for testing insert earphones and other audio transducers, Model AEC204 occluded-ear simulator includes built-in microphone and is compliant with IEC 60318-4. Models AEC202 and AEC203, compliant with IEC 60318-5, are 2 cmÂ-³ couplers designed to be used with ½ in. and 1 in. microphones, respectively. Using AUDit™ software, users can automatically correct RETSPL measurements...

Read More »
Plastic Shaft Mount Components withstand washdown environments.
Shaft Couplings

Plastic Shaft Mount Components withstand washdown environments.

Supplied with stainless steel clamping screws, Stafford Plastic Shaft Mount Components are machined from PTFE, Delrin®, nylon, and other thermoplastics for FDA- and USDA-approved processing equipment and conveyors. Specific components include 1- and 2-piece shaft collars, set-screw collars, hinged shaft collars, 1- and 2-piece couplings, and flange mounts, and ID bore sizes from 1–4 in....

Read More »
Two New Powerful Fireboats with Voith Propulsion Technology for Long Beach
Shaft Couplings

Two New Powerful Fireboats with Voith Propulsion Technology for Long Beach

YORK, Pa.Â- – Voith will provide Voith Schneider Propellers and turbo couplings for two fireboats designed by Robert Allan Ltd. for the Port of Long Beach, USA. With a water pumping capacity of more than 40,000 gallons per minute they will be among the world's most powerful fireboats. The numbers are impressive: With a total of ten monitors, each of the two identical fireboats is able to...

Read More »
Hybrid Coupler operates from 10-40 GHz.
Signal Couplers

Hybrid Coupler operates from 10-40 GHz.

Measuring 0.86 x 1.10 x 0.50 in., Model 4100400 delivers 3 dB of coupling over full frequency range of 10–40 GHz. Device features amplitude imbalance of ±1.0 dB, phase imbalance of ±12°, isolation greater than 12 dB, and insertion loss of less than 1.7 dB. Capable of handling 20 W of average power and 3 kW of peak power, 180° hybrid coupler splits and combines signals in...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics