New Series of Patch Panels Features 1U and 2U, 19" Rack-mount Panels as well as Universal Sub Panels
N-Type couplers available with 1, 2, 3, 4, 16 and 32 ports. 0.630” D-Hole panels feature 1, 2, 3, 4,16 and 32 port options. All panels are constructed of rugged .06” cold rolled steel and feature a black powder coat finish which provides durability.
Read More »
New Antenna Coupler Designed to Be Quickly and Safely Installed
Provides isolation and shielding for consistent aircraft transponder testing in ramp and hangar environments without signal interference. Developed to be easily placed over the top L-Band "shark fin" transponder antenna using a pole. Eliminates the need for installation personnel to wear a harness and climb onto the fuselage.
Read More »
SCHURTER to Showcase The First UL Approved IEC 400 VDC Couplers at Data Center World 2019
Santa Rosa, California, March 14, 2019— SCHURTER, an innovative and progressive manufacturer of circuit protection, connection, input systems and EMC products for the information and communication technology (ICT) industry will feature its newest connectors at Data Center World 2019, which takes place March 19th through 22nd in Phoenix, Arizona. SCHURTER will feature the latest UL approved...
Read More »
L-com Introduces IP68-Rated USB 2.0 Cable Assemblies and Panel-mount Coupler for Harsh and Industrial Applications
U3A00064-series cables has a USB 2.0, Type-C IP68-rated connector on one end and a standard USB 2.0 Type-A connector on the other. Features gold-plated contacts that stand up to repeated mating cycles, 32/24/28 AWG cable. U3B00001 coupler features threaded couplings and an O-ring seal ensuring protection against water and dust.
Read More »
In-Mold Electronics
To learn more about in-hold electronics (IMEs) and solutions offered by Eastprint, Inc., download now.
Read More »
Stafford Introduces New Shaft Collars and Couplings
Can range from 0.25” to 14” I.D. for shaft collars and 0.25” to 4” I.D. for couplings. Bores can be in hex, round and square with keyways or threads. Face and O.D. can include cams, flanges, flats, knurls, laser etching, levers, slots and tapped through-holes.
Read More »
New Couplers Constructed With Bronze Waveguide Bodies
Fairview Microwave Inc. recently released a line of cross guide waveguide couplers that are available with 4, 3 or 2 ports. They are constructed with bronze waveguide bodies and offered with EIA-style flanges or UG-style flanges per military standards. The couplers are made up of 160 parts in three sub-categories of cross guide couplers, cross guide couplers with terminations or cross guide...
Read More »
New MIL-STD-1553B Bus Couplers from MilesTek are Available for Mil/Aero and Ground Vehicle Applications
MilesTek’s new MIL-STD-1553B Bus Couplers, which feature a transformer ratio of 1.41:1, are RoHS compliant. The couplers have one to eight stub options as well as single, double, and no bus jack models. The couplers’ stub resistor values are 59 Ohm, 2W, 1%.
Read More »
Platinum Tools Introduces RJ45 Coupler System with Cycle Life of 1,000 Insertions
The Waterproof RJ45 Coupler System comes with gold plated 50μ over copper alloy contact material, 13/16 in.-28 UN thread size and maximum panel thickness of 4.0 mm. The product can be operated in -20°C to +80°C temperature range with rating of 1 A (current) and 48 V (voltage). The coupler features a screw mating system that ensures secure connection and is compliant to RoHS standards. It is...
Read More »
New 433 DLF Domestic Water Meter Coupling is Compliant with Safe Drinking Water Act
Matco-Norca’s 433 DLF Domestic Water Meter Coupling is offered in five sizes ranging from 1/2 in. MIP x 2-1/4 in. up to 2 in. MIP x 3 in. The unit is used for connecting water meter to valve or house piping. It is compliant to AWWA C800 standards and is designed with C89833 brass ingot.
Read More »
Stafford Presents Specialty Shaft Couplings to Address Different Mounting and Positioning Needs
The Specialty Shaft Couplings consist of PowerRing™ rigid shaft, precision sleeve, flange and remachineable couplings. The units are offered in 1/4 to 2 in. bore sizes in aluminum, steel, stainless steel and ANSI 1018 weldable steel. The couplings maintain precision shaft alignment by adjusting phase relationship between two shafts or a mounted component and maintains concentricity between two...
Read More »
Precision Machined Parts for High Tech Applications
For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.
Read More »
