Latest Stafford Dual-Keyed Rigid Couplings Come with Axial and Annular Keyways
Shaft Couplings

Latest Stafford Dual-Keyed Rigid Couplings Come with Axial and Annular Keyways

Stafford Dual-Keyed Rigid Couplings are available in 1 to 5 in. I.D. sizes with straight-through or stepped bores. Units are designed for preventing axial and radial slippage in high torque and axial load applications. The couplings are machined from high temperature alloys, steel, stainless steel or aluminum and are suitable for connecting shafts used in mixers, pumps, fans and drive systems.

Read More »
New Stafford Accu-Clamp™ Shaft Collars Provide Accurate Working Surfaces and Mar-Free Clamping
Shaft Couplings

New Stafford Accu-Clamp™ Shaft Collars Provide Accurate Working Surfaces and Mar-Free Clamping

Stafford Accu-Clamp™ Shaft Collars from Stafford Manufacturing Corp. are made from aluminum, steel, and stainless steel. Available in 0.5” to 2” I.D. sizes, the clamp offers distortion-free coupling with a precise fit and shaft-to-shaft concentricity within 0.001” TIR. TIR measurement permits mounting next to precision bearings, sprockets, and gears. Accu-Mount™ and Accu-Flange™...

Read More »
Miki Pulley's New Step-Flex™ Couplings Offer Electric and Temperature Isolation
Shaft Couplings

Miki Pulley's New Step-Flex™ Couplings Offer Electric and Temperature Isolation

Step-Flex™ Couplings are offered in 9 sizes with bore sizes ranging from 3 mm - 30 mm and consist of two-plaster elastomer element combination that helps in dampening caused by the actuator carrier. In this coupling design the hard element is separated from aluminum alloy hubs with soft elastomer disc for minimizing vibration, angular and parallel misalignment. The units offer a torque of 60 Nm...

Read More »
ServoClass® Couplings Come with Corrosion Resistant Socket Head Cap Screws
Shaft Couplings

ServoClass® Couplings Come with Corrosion Resistant Socket Head Cap Screws

Zero-Max’s ServoClass® Couplings are available in single and double flex models for bore diameters 10mm to 30 mm. These units provide zero backlash and features 304 stainless steel disc packs and clamp-style hubs. The Couplings can mount on k6 and j6 shafts and are suitable for applications such as automation, packaging, semi-conductor assembly, laboratory automation and medical equipment....

Read More »
Stafford's Bore Shaft Components are designed for military vehicle applications.
Shaft Couplings

Stafford's Bore Shaft Components are designed for military vehicle applications.

Stafford’s Bore Shaft Components include shaft collars, rigid couplings and flange mounts. These shaft collars are available in sizes up to 14 in. I.D. and varying O.D.’s, rigid couplings with bores to 6 in. and lengths to 16 in. and flange mounts with bore sizes 6 in. These components are made from steel, stainless steel, special alloys and aluminum and are suitable for fire-fighting...

Read More »
Krytar's Hybrid Coupler covers microwave frequency bands from L through K-band.
Signal Couplers

Krytar's Hybrid Coupler covers microwave frequency bands from L through K-band.

4010265SQ 180 Degree Hybrid Coupler is suitable for applications that require precise monitoring, signal mixing or swept transmission and reflection measurements. This coupler is operated in 1.0 to 26.5 GHz frequency range and deliver phase imbalance of ±16°, isolation is greater than 15 dB, maximum VSWR of 1.8 (1-20 GHz) and 1.95 (20-26.5 GHz). Unit comes in 4.04 L x 1.35 W x 0.52 in. H...

Read More »
SeriesLock™ Couplers come with non-magnetic springs.
Couplings (Fittings)

SeriesLock™ Couplers come with non-magnetic springs.

SeriesLock™ Couplers are offered to accommodate barb sizes ranging from 1/8 in. ID to 3/4 in. ID Tubing. Couplers offer spring-free flow path and audible click for connection. Product optimizes the flow, reduces restriction, turbidity, foaming and bubbles. Units come with recessed mating, safety slide release and single barb technology and reduce accidental disconnects.

Read More »
WAGO Develops New Flexible BACnet Coupler
Couplers and Couplings

WAGO Develops New Flexible BACnet Coupler

Germantown, WI - February, 2017 - The new 750-330 BACnet coupler is the latest addition to the line of building automation controllers and remote I/O. The Building Automation and Control Network enabled coupler facilitates the communication between building automation devices and control systems applications. The BACnet/IP Coupler is equipped according to BACnet revision 12 and can manage up to...

Read More »
L-com Releases M12 and M8 Field Term Connectors, Couplers, Adapters and Receptacles to Address Industrial Connectivity Applications
Electrical Connectors

L-com Releases M12 and M8 Field Term Connectors, Couplers, Adapters and Receptacles to Address Industrial Connectivity Applications

NORTH ANDOVER, MASS. - JANUARY 26, 2018 - L-com Global Connectivity, a preferred manufacturer of wired and wireless connectivity products, announced today that it has introduced a new line of M12 and M8 connectors, adapters, receptacles and couplers to address harsh environment connectivity applications. These new products are designed for industrial control and factory automation, test...

Read More »
Shaft Collars, Couplings and Flange Mounts are USDA and FDA approved.
Shaft Couplings

Shaft Collars, Couplings and Flange Mounts are USDA and FDA approved.

Shaft Collars, Couplings and Flange Mounts are machined from 303 or 316 stainless steel, Nylon, or Delrin® with 18-8 or SST fasteners. Suitable for use in fruit, nut, vegetable, poultry and conveyor equipment, units are designed with hex, square and round bores. Offered as one-, two piece versions, stainless steel units come in 0.25 to 14 in. I.D. sizes whereas Nylon and Delrin® collars are...

Read More »

All Topics