Stafford Introduces Weldable Shaft Collars & Couplings to Solve Design and Maintenance Problems
Machined from ANSI 1018 steel and stainless steel, these weldable shaft collars and couplings let users add special features such as actuators, brackets, cams, connectors, flange mounts, levers, pins, and rods. WILMINGTON, MASS. (PRWEB) MAY 22, 2019 - Stafford Manufacturing Corp. has introduced a line of shaft collars, couplings, and mounts machined from ANSI 1018 steel and stainless steel to...
Read More »
New Oldham Coupling Hubs Available in Bore Sizes from 1/8 Inch to 3/4 Inch and 3 mm to 20 mm
Balanced design for reduced vibration at high speeds of up to 6,000 rpm and operate with low bearing loads. RoHS3 and REACH compliant unit act as a mechanical fuse during torque overload situations. Available in acetal for zero-backlash and high torque capacity.
Read More »
New Antivibration Flexible Couplings are Designed for Use with High Gain Servomotors
Available in three types (S50GS2MA…, S50GT2MA… and S50GL2MA…) in bore sizes ranging from 3 to 16 mm. Features construction of vibration reducing rubber (FKM) molded with aluminum lubs. Suitable for applications such as semiconductor manufacturing equipment, blood analyzers or high speed printers.
Read More »
New Stafford Shaft Collars, Couplings & Mounts Available in Standard Aluminum, Steel and Stainless Steel Parts
Include parts for attaching vision systems, sensors, grippers and other devices on drones permanently or adjustable and quick-change requirements. Enables OEMs to match design requirements for strength, weight and corrosion-resistance. Available in 0.125” to 14” I.D. sizes with various bore configurations, depending upon the part.
Read More »
5 Questions to Ask When Choosing a Custom Glass Manufacturer
Due to the inherent complexity of glass fabrication, many professionals seeking glass services know exactly what kind of part is needed, but are unclear on the intricacies of the actual manufacturing process. PEG's exclusive guide is designed to help professionals navigate the custom glass manufacturing process with valuable information.
Read More »
New Directional Coupler Maintains Flat 10 dB Coupling Across a Wide 100-GHz Bandwidth
Model 1100110010 features operating temperature of -54°C to +85°C. Offers coupling performance with 10 dB (±1.5) 10-90 GHz and 10 dB (±1.8), 90-110 GHz. Provides directivity of at least 10 dB from 10 to 55 GHz and at least 7 dB at high frequencies from 55 to 110 GHz.
Read More »
New Series of Patch Panels Features 1U and 2U, 19" Rack-mount Panels as well as Universal Sub Panels
N-Type couplers available with 1, 2, 3, 4, 16 and 32 ports. 0.630” D-Hole panels feature 1, 2, 3, 4,16 and 32 port options. All panels are constructed of rugged .06” cold rolled steel and feature a black powder coat finish which provides durability.
Read More »
New Antenna Coupler Designed to Be Quickly and Safely Installed
Provides isolation and shielding for consistent aircraft transponder testing in ramp and hangar environments without signal interference. Developed to be easily placed over the top L-Band "shark fin" transponder antenna using a pole. Eliminates the need for installation personnel to wear a harness and climb onto the fuselage.
Read More »
SCHURTER to Showcase The First UL Approved IEC 400 VDC Couplers at Data Center World 2019
Santa Rosa, California, March 14, 2019— SCHURTER, an innovative and progressive manufacturer of circuit protection, connection, input systems and EMC products for the information and communication technology (ICT) industry will feature its newest connectors at Data Center World 2019, which takes place March 19th through 22nd in Phoenix, Arizona. SCHURTER will feature the latest UL approved...
Read More »
L-com Introduces IP68-Rated USB 2.0 Cable Assemblies and Panel-mount Coupler for Harsh and Industrial Applications
U3A00064-series cables has a USB 2.0, Type-C IP68-rated connector on one end and a standard USB 2.0 Type-A connector on the other. Features gold-plated contacts that stand up to repeated mating cycles, 32/24/28 AWG cable. U3B00001 coupler features threaded couplings and an O-ring seal ensuring protection against water and dust.
Read More »
Stafford Introduces New Shaft Collars and Couplings
Can range from 0.25” to 14” I.D. for shaft collars and 0.25” to 4” I.D. for couplings. Bores can be in hex, round and square with keyways or threads. Face and O.D. can include cams, flanges, flats, knurls, laser etching, levers, slots and tapped through-holes.
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
