New Computers Products

Digital Bit Stream PXI Card offers 1-16 channels.

Ultrafast UX7005 3U format PXI Card features 16 TTL channels that can be programmed for recording or signal generation. Clock rate is adjustable from 1 kHz to 125 MHz. Card is supplied with 128 Mbit on-board memory as standard, but can be increased in increments of 256 Mbit and 512 Mbit up to 1,024 Mbit when long signals need to be recorded or generated at max clock rates. Software drivers for...

Mezzanine Card targets telecom infrastructure applications.

ProcessorPMC Card, Model PmPPC7447 combines 1 GHz Motorola PowerPC MPC7447A processor with Marvell Discovery III system controller. Processor features 32 KB on-die L1 instruction/data cache and 512 KB on-die L2 cache. Discovery controller gives processor high-speed accesses to up to 2 GB of external memory via 133 MHz Processor Bus. Consuming 18 W of power, Model PmPPC7447 includes 2 Gigabit...

Computer Module addresses customizable embedded applications.

Based on Embedded Technology Extended form factor, Model eTX-Lx15 features IntelÃ-® PentiumÃ-® M processor at speeds from 1.1-1.7 GHz, IntelÃ-® 855GME chipset, and up to 1 GB PC1600/2100 DDR SDRAM on single 200-pin SODIMM socket. Integration of Intel's Extreme Graphics 2 controller provides 2D/3D performance with up to 64 MB dynamic video memory, dual channel LVDS, and simultaneous...

Single Board Computer is based on EPIC form factor.

Ruggedized XE-800 operates over a -40 to +75Ã-

Solutions to Common Pains in the Clinical and Commercial Phases of Pharmaceutical Development

This ebook provides solutions to common pain points in the clinical and commercial phases of pharmaceutical development.

PC/104 GPS Receiver is suited for embedded computers.

OrbiTrak(TM) 8R integrated GPS (Global Positioning System) board, designed for mobile and vehicular PC/104 embedded computer systems, supports NMEA 0183 and TAIP ASCII protocols as well as binary TSIP GPS data formats. Product integrates 8-channel Trimble Lassen(TM) LP GPS module, 2 TTL serial ports, 16 digital I/O, external battery backup, odometer input, and clock input. It interfaces with host...

Single Board Computer features Rabbit 3000 microprocessor.

BL2600 Wolf is available with or without 10/100 Ethernet and utilizes Rabbit 3000(TM) microprocessor at 44.2 and 29.4 MHz, respectively, with 512 k Flash and 512 k SRAM standard. Dual entry IDC through-hole sockets allow header mounting on either side of board and polarized industry-standard friction-lock-connectors enable assembly with wire harnesses. Computer includes digital I/O ports, A/D...

Serial Port Board enables embedded system communications.

Emerald-MM-Opto PC/104 module offers 4 optically isolated serial ports with RS-232, RS-422, and RS-485 protocols, each of which is independently configurable for protocol and IRQ settings. Available in 2- or 4-port configurations, unit includes 24 digital I/O lines with programmable direction and user-configurable pull-up resistors. Product also features auto-flow control and 16C2850 UART chip...

Workstation suits pharmaceutical applications.

Designed with NEMA 4X stainless steel enclosure, Model 2655AB has aseptic design with passivated enclosure, beveled edges, and slanted top. Its 18.1 in., color, flat-panel monitor is equipped with NFI (Near Field Imaging) Touch Screen, which is resistant to impact and harsh chemicals. Monitor has integrated membrane keyboard and pointing device and also includes KVM Extender System for up to 400...

PCI Card suits development and simulation applications.

PCI-compatible PCI-Altera-485 includes PLX9054 and Xilinx for initial loading of Altera, and DMA transfer of data into and out of FIFOs. Altera controls 40 programmable RS-485/LVDS transceivers and 12 TTL IO. Each RS-485 channel is programmable for direction, termination, and function. Eight Cypress 22393 PLLs support Altera providing ability to synthesize multiple reference rates. PLX 9054...

Analog Output Board suits PCI-based computers.

Model OMB-DAQBOARD-2004 offers four 16-bit 100 kHz analog outputs ranging from -10 to +10 V. Through use of Bus Mastering DMA, each D/A output can continuously output waveform, which can be read from PC RAM or file on hard disk. Program can asynchronously output value to either D/A for nonwaveform applications if D/A is not already being used in waveform output mode. Additional D/A channels can...