Dust / Fume / Mist Collectors

Dust Collector suits pressure-blast cabinets.

With 3 hp blower and non-ferrous 3,450 rpm impeller, cartridge-type Model D1000 extracts adjustable 1,000 cu-ft of air/min. Unit is fabricated in continuously welded 12-gauge steel plate with overall dimensions of 112 x 40 x 50 in. Two pleated paper cartridges each have filter area of 226 sq ft and provide average efficiency of 99.99% for particles of 0.5 micron or larger. Automatic pulse jet...

Read More »
Dust / Fume / Mist Collectors

New Sorbent Technologies Mercury Product Addresses Large Market Segment

TWINSBURG, Ohio, Jan. 11 -- Sorbent Technologies Corporation (Pinksheets: SORB) today announces that it has successfully completed a technology development effort with the U.S. National Science Foundation resulting in the commercial introduction of a power plant mercury sorbent compatible with fly ash use in concretes. The new product, called C-PAC(TM), can allow coal-fired power plants to...

Read More »
Air Cleaning Equipment

Donaldson Showcases Filtration Technology at the Conexpo-Con/Agg 2008 and IPFE 2008 Show

Engine Systems & Parts and Industrial Hydraulics Businesses to introduce new products MINNEAPOLIS, MN - December 20, 2007 - Donaldson Company (NYSE:DCI), a leading, worldwide manufacturer of filtration systems and parts, is pleased to announce that two company business units, Engine Systems & Parts and Industrial Hydraulics, will introduce and showcase the latest in Donaldson filtration...

Read More »
Fume Extraction System offers 99.5% filtration efficiency.
Smoke and Fume Extractors

Fume Extraction System offers 99.5% filtration efficiency.

Designed to capture particles and pollutants produced by soldering process, Weller Model WFE2ES is suited for solder baths, hot air soldering, micro soldering, and adhesive applications. Compact filter system consists of F5 class fine-dust filter and Puratex H12 HEPA filter with active carbon. Brushless, maintenance-free turbine provides effective removal of pollutants from air while offering low...

Read More »
Cyclone Dust Collectors feature storage hopper.
Dust / Fume / Mist Collectors

Cyclone Dust Collectors feature storage hopper.

Available in 7 models from 1,500-12,000 cfm and 2-50 hp, Cyclone Dust Collectors centrifugally separate dust and chips from air stream, exceeding 99% efficiency by weight for wood dust and waste from steel grinding. Storage hopper, with capacity of 105 cu-ft, features 24 in. square rack and pinion slide gate with hand wheel or pull chain operator. It is suited for wood or plastic waste storage...

Read More »
Reverse Air Dust Collectors filter 4,500-70,000 acfm.
Dust / Fume / Mist Collectors

Reverse Air Dust Collectors filter 4,500-70,000 acfm.

RAC Series Reverse Air Collectors removes accumulated dust from filter bags without requiring compressed air. They feature internal blower and heavy duty Â-¾ hp explosionproof gear drive motor to move cleaning arm. High-velocity nozzles direct air for continuous cleaning of each filter bag on every rotation. System also features walk-in clean air plenum, 10 ga carbon steel construction, snap...

Read More »
Westermo Switches Used on Seattle Bus Fare Collection System
Network / Ethernet Switches

Westermo Switches Used on Seattle Bus Fare Collection System

The ERG Group, a world leader in the development and supply of integrated fare management and software systems for the transit industry, have chosen Westermo Ethernet switches to equip approximately 2500 buses operating in the Central Puget Sound Region of Washington State, around the city of Seattle. The new fare collection system provided by ERG will collect upwards of $250 million in annual...

Read More »
Dust / Fume / Mist Collectors

Dust Collector offers downdraft velocity of up to 100 fpm.

With air volumes up to 2,500 cfm, Model SDB captures smoke, dust, and powders resulting from operations such as grinding, polishing, hand sanding, and dry buffing. System features 80 x 55 in. grated work surface that can accommodate loads up to 75 lb/sq-ft. It automatically self-cleans when pulses of compressed air dislodge dust from filters upon shutdown. By drawing particles and contaminants...

Read More »
Fluid Filters

New Technology Added to Monster Separation System(TM); One Call Solves All Inlet Problems

Costa Mesa, CA - Wastewater facility managers and consulting engineers now have a single source for high quality screens, compactors and grit removal equipment. JWC Environmental's Monster Separation System can now incorporate a highly-reliable vortex grit removal system named Grit Monster(TM), or a robust bar screen called Catenary Monster(TM). JWC signed an agreement this week with Mabarex Inc....

Read More »
Dust / Fume / Mist Collectors

Intelli-Touch(TM) Dust Collector Control Saves Energy

Micro Air® Clean Air Systems has introduced a new energy savings control panel option for their entire line of dust collectors. The new Intelli-Touch(TM) Energy Savings Control Panel reduces energy consumption with a built-in variable frequency drive that automatically controls motor RPM based on CFM needed at the running static pressure. The Intelli-Touch(TM) also utilizes a soft start and...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics