Coatings

2K850 UV Cure Coating offers thickness of 200-400 μm.
Paints & Coatings

2K850 UV Cure Coating offers thickness of 200-400 μm.

2K850 UV Cure Coating is suitable for LED, automotive, aerospace and other tough electronic applications. Product is enhanced with edge coverage, adhesion, hardness and scratch resistance capabilities and offers protection against water, moisture and condensation. 2K850 coating meets UL94V-0, IPC-CC-830C, MIL-I-46058C and IEC 61086 standards and features an operating temperature range from -65 to...

Read More »
Electrolube’s Silicone Coatings include 2K750, MCS and HCS.
Paints & Coatings

Electrolube’s Silicone Coatings include 2K750, MCS and HCS.

Electrolubes’ 2K750 Conformal coating is compliant to UL94V-0 standards and offers operating range of -40 to +220°C and a cure time of 10 mins at 80°C. Moisture Cure Silicone conformal coating (MCS) and Heat Cure Silicone coating (HCS) are low stress coatings that offer -40 to +200°C operating temperature range. MCS provides touch-dry time of 10 mins at 25°C at ambient conditions whereas...

Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
Paints & Coatings

Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements

St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...

Read More »
PG&O
Optics & Photonics

PG&O

Company will showcase optical components and thin film filters for medical and life science applications at SPIE’s BiOS booth #8648 and Photonics West 2018 booth #4867, Jan. 27- Feb. 1, 2018, Moscone Center, San Francisco. SANTA ANA, CA – December 19, 2017 - Precision Glass & Optics (PG&O - www.pgo.com), provides optical thin film coatings and custom optical solutions for a wide variety of...

Read More »
The Economic and Strategic Benefits of Cloud Computing
Sponsored

The Economic and Strategic Benefits of Cloud Computing

Cloud computing and software-as-a-service (SaaS) are two of the hottest IT trends that have emerged in the last couple of decades. By creating the ability to store and access data and programs through the internet while cutting out the middleman (aka, hard drives and other physical devices), cloud computing offers many attractive features to companies in almost all industries, including fiscal savings, speed, scalability, ease of upgrades, and agility. Although the upfront savings of SaaS are undeniable, there are still many that favor on-premise systems and proprietary software. You may be wondering if transitioning to a cloud-based model is the right choice for your company, but with so many different viewpoints it can be hard to make sense of all the pros and cons. Using concrete data organized into helpful graphs, this white paper offers insightful interpretations of the numbers to show the ways in which SaaS can offer both financial savings and strategic advantages.

Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
Paints & Coatings

CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.

CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...

Read More »
InterCoat is RoHS compliant.
Paints & Coatings

InterCoat is RoHS compliant.

InterCoat®ChemGuard Coating is suitable for automotive, aerospace, construction, electrical conduit, wall studs, furniture, fixtures, appliances, outdoor and highway railing applications. Unit offers corrosion resistance for galvanized steel and helps to protect the material during stamping, roll forming, shearing. Product provides low coefficient of friction and is eco-friendly....

Read More »
Zinc Clad is suitable for blasted steel.
Paints & Coatings

Zinc Clad is suitable for blasted steel.

Zinc Clad® 4100 Epoxy Coating comes with self-healing properties and help to reduce the need for sweat-in time. Unit is suitable for bridge and highway structures, stadiums and sports complexes, steel fabrication shops, piping, barges and ships, drilling rigs, and refineries applications. Product features recoat time below 30 minutes and comes in a user-friendly package.

Read More »
Paints & Coatings

Abrisa Technologies Publishes New Data Sheet Coated Glass Solutions for In-Vehicle Infotainment Displays & Driver Assist Sensing

Santa Paula, CA - Abrisa Technologies offers coated glass Total Solutions for the Vehicular market that builds upon its unique combined volume manufacturing expertise in both fabricated glass and optical thin film coatings. According to Lisa Tsufura, Product Manager for Abrisa Technologies, "Our Total Solutions for Infotainment and HUD Augmented Reality Display and Enhanced Vision Systems achieve...

Read More »

All Topics