Clamping Systems

Welding End Prep Tool Designed for Highly Repetitive Milling
Material Handling Clamps

Welding End Prep Tool Designed for Highly Repetitive Milling

A portable welding end prep tool that features air-operated clamping which reduces cycle times for highly repetitive end prep milling in fabrication shops is available from ESCO Tool of Holliston, Massachusetts. The MILLHOG® Mongoose Air Clamp™ Welding End Prep Tool is equipped with an air-operated clamp that attaches to a tube or pipe I.D. and releases from it by simply flipping a toggle...

Read More »
Clamping System, PCBN Grades enable efficient cast iron machining.
Clamping Systems

Clamping System, PCBN Grades enable efficient cast iron machining.

Beyond Shield™ has 3-point, carbide-clad clamp that exhibits wear resistanceÂ- against chip flow and applies clamping force toward front of insert to reduce vibrations that can lead to cracking/failure. With this rigid clamping system, smaller IC PCBN (polycrystalline cubic boron nitride) inserts can perform well in same applications as larger IC inserts. Available...

Read More »
BIG Kaiser to Display Comprehensive Line-Up at South-Tec Booth #1711
Handle Grips

BIG Kaiser to Display Comprehensive Line-Up at South-Tec Booth #1711

Hoffman Estates, ILÂ- – BIG Kaiser Precision Tooling Inc. has been continually expanding its product line while staying true to its mission of bringing the highest quality, most precise, most reliable and most accurate tooling and accessory products to market. The entire KAISER EWD Series of digital boring heads will be featured-including the brand new 310 medium diameter and 318 large...

Read More »
Electric OD Clamping End Prep Tool features 950 W motor.
Clamping Systems

Electric OD Clamping End Prep Tool features 950 W motor.

With Â-½–2 ½ in. working range, ESCO Electric C-MILLHOG® OD Clamping End Prep Tool is suitable for prepping stainless steel and most hard-to-machine alloys. Clamp grips tubing from outside, evenly distributing holding power, to ensure chatter-free, precision end prep on both thin- and heavy-wall tubes. Suited for use on high-purity piping systems requiring 37½Â°...

Read More »
Kurt Hydraulic Clamping Systems & Hydraulic Pumps Ideal for High Production Machining Operations
Power Clamps

Kurt Hydraulic Clamping Systems & Hydraulic Pumps Ideal for High Production Machining Operations

FREE New 20-Page Catalog – Call 1-877-226-7823 Minneapolis, Minnesota: Kurt's Hydraulic Clamping Systems speed the part clamping process in machining centers with accuracy and less effort. These Kurt Systems locate and clamp workpieces in seconds for high precision repeatability while increasing machine output This new Kurt product line provides a wide range of Swing Clamps, accessories and...

Read More »
ILSCO Achieves UL 2703 Certification
Clamping Systems

ILSCO Achieves UL 2703 Certification

Cincinnati, OH --Â- ILSCO is pleased to announce that its line of ILSCO Solar products for grounding have received UL2703 Certification. Our solar grounding products are used in utility, commercial and residential scale projects and ILSCO responded to our customers’ requests to secure this Certification. UL2703 Certification is specific to Rack Mounting Systems and Clamping Devices for PV...

Read More »
ROTA NCR Precision 6-Jaw Compensation Chuck
Clamping Systems

ROTA NCR Precision 6-Jaw Compensation Chuck

The clamping of thin-walled and easily deformed components is challenging. With the ROTA NCR 6-jaw compensation chuck, SCHUNK offers a standard solution for this type of workpiece. SCHUNK has standardized the sizes of the ROTA NCR with diameters up to 1200 mm opening up the possibilities for precision workpiece clamping with large lathe chucks.Â-  The ROTA NCR consists of a central chuck...

Read More »
Needle Valves

HASCO Innovations at the wfb

HASCO is presenting a large number of innovations from its Mould Base Division and Hot Runner Division at the wfb in Siegen/Germany, Hall/Stand S 07.01/05. The Mould Base Division is presenting the A8001 clamping fixture. This permits high-precision clamping and alignment of the system plates, thus ensuring optimum horizontal and vertical processing on 5 sides with a high repeat accuracy....

Read More »
Manual Wedge Grips meet Nadcap requirements.
Pulling Grips

Manual Wedge Grips meet Nadcap requirements.

Available in 22,000 and 56,000 lbf capacities, Manual Wedge Grips are suitable for tensile tests on composites, metals, and plastics over temperature range of -112 to +482°F. Grips incorporate moving body, driven by worm gear drive, which closes jaw faces together in self-centering action to clamp specimen. Symmetrical construction of grip body provides even clamping of specimen under load....

Read More »
Innovative Small Series Mould Saves Time and Costs in Mouldmaking and Tooling Design
Clamping Systems

Innovative Small Series Mould Saves Time and Costs in Mouldmaking and Tooling Design

The innovative small series mould K3600/ has been coordinated exclusively by HASCO to the new Clever Mold System CMS from B&R and developed for the cost-effective production of practical small production runs. K3600/ allows users to change the mould quickly and efficiently on all conventional injection moulding systems equipped with the respective clamping system. In the CMS it has been possible...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics