New Butterfly and Ball Valve Meets Pressure and Temperature Guidelines
Type-57AT butterfly valve available in wafer and lugged styles. Type-21AT ball valve includes double O-ring seals on the stem for added protection. Valves are full port in sizes 1/2” through 2”.
Read More »
Upgraded Brass Lead Free Press Ball Valve Features Leak-Prior-To-Press Technology
Available in ½ in. up to 4 in sizes and compliance with UPC, AB1953, NSF-61 and NSF-372 standards. Incorporates EPDM O-ring that allows water or air past the sealing element of un-pressed connection. Offer press-fit systems for flame free installations, making solder connections less preferred method in copper applications.
Read More »
New Brass Ball Valves Feature Blow Out Proof Stems
754PXLF and 754PXCELF ball valves are available in 1 1/4”, 1 1/2" and 2” sizes. Provides 400 PSI cold working pressure. Comply with a 0.25% weighted average lead content on wetted surfaces.
Read More »
New PEX & MNPT Ball Valves Available in 1/2", 3/4" and 1" Sizes
Valves are capable up to 400 psi. Equipped with blowout proof stems. Includes C46500 forged brass stems, bodies, balls and bonnets.
Read More »
Peristaltic Pump Vs. i-FILL® Technology
Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.
Read More »
Latest Industrial Ball Valve and Limit Switch Packages Allow Remote Monitoring of Critical Manual Valve Applications
Available in 600LL-LS2 (carbon steel) and 700LL-LS2 (stainless steel) models in sizes ranging from ¼ to 2 in. with investment cast 2-piece WCB or CF8M body. Features a pressure rating 2000 psi and 1000 psi or 150 psi steam for ¼ to 1 in. models and 1-1/4 to 2 in. models respectively. The LS2 limit switch is offered in a die-cast aluminum housing with BUNA-N O-ring that protects against...
Read More »
New PVDF TB Series Ball Valves Come with Double O-Ring Stem Seals
The TB Series Ball Valves from Hayward are offered in true union design with threaded or IPS socket fusion end connections. The products come in 1/4 through 1 in. sizes with reversible PTFE seats. The valves are rated to 150 psi pressure at 70ºF and offer a maximum service temperature of 240°F.
Read More »
New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles
Bonomi’s ANSI Class 150 Flanged Ball Valves are offered in 766000SRL (Stainless Steel) and 766001SRL (Carbon Steel) models in 1 to 3 in. sizes. The units come with a grounded stainless steel and blow-out proof stem, virgin PTFE seats, and Graphoil and PTFE seals. The valves feature 300 stainless steel hidden-spring design handles, fasteners, and nuts for use in harsh environments. The units are...
Read More »
V-Ball Automated Valves Feature a Blow-Out Proof Stainless Steel Stem
Bonomi’s V-Ball Automated Valves are offered in ANSI Classes 150, 300 and 600 packages with carbon or stainless steel bodies. This unit provides ball port choices of 15°, 30°, 60° or 90° and 15/30°, 30/60° or 60/90° V-balls. Valves come with stainless steel stem with adjustable packing, stainless steel ball and P.T.F.E. seats, packing and thrust washer. Units are compliant to NACE MR...
Read More »
Leaded and Lead-Free Brass Ball Valves are UL/FM approved.
Leaded and Lead-Free Brass Ball Valves are available in sizes ranging from ¼ in. to 4 in. Units feature a two-piece forged body design and come with 600PSI Non-Shock WOG 125PSI SWP rating. Products offer PTFE seats and a locking device on the handle.
Read More »
759 Ball Valves are rated to CSA Gas standards.
759 Ball Valves are available in 759LHLF (Locking Handle) and 759TLF (Tee Handle) models and are suitable for industrial steam, water, oil, gas and air applications. 759LF is offered in 1/4 to 1 in. sizes whereas 759LHLF in IPS sizes 1/4 to 4 in. 759TLF comes in 1/2 in. to 1 in. IPS and CxC sizes. 759TS and 759TSLF valves comes in 1/2 in. to 1 in. sizes.
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
