Fci
Etters, PA 17319
Share:
Plug Connectors provide 200 or 296 signal contacts.
Supporting data rates up to 10 Gb/s, GIG-ARRAYÃ-® 25 mm Mezzanine Connectors add capability for 40 mm stack height when used with existing 15 mm receptacles, and can also be paired with 5 mm receptacle connectors to achieve 30 mm board-to-board spacing. Connector with 296 positions contains 37 columns with 8 signal contacts and 9 ground contacts, while 200-position connector contains 25...
Read More »
Mass Flow Meter measures gases in crowded installations.
Combining no-moving parts thermal mass flow sensing with built-in VortabÃ-® flow conditioning, ST75V(TM) Air/Gas Flow Meter achieves Ã-
Read More »
Subscriber Interface targets vDSL applications.
Composed of cable connectors, pcb connectors, and cable assemblies, Low-Profile Subscriber I/O System supports connection of signals and power for DSL subscriber accounts. Dual row signal connectors have 24 contacts on 2.00 mm pitch, power connectors have 2 contacts on 2.54 mm pitch, and pcb header measures 14 x 20 x 13 mm. Cable connector design employs 2 additional first-mate/last-break...
Read More »Power Modules are designed for press fit terminations.
Measuring 12 mm along card edge, MetralÃ-® coplanar power modules are used in ATCA Zone 3 to interface between front board and rear transition module in ATCA system. Meeting IEC 61076-4-104 standard, each 5-row module provides 10 stamped-and-formed power contacts and maximum current rating for each power blade contact is 4 A at 20Ã-
Read More »
Input Connectors support MicroTCA power modules.
Enabling -48 or -60 Vdc input connection, D-Subminiature 7W2 Connectors suit power modules used in MicroTCA shelves. Each power contact provides 24 A current carrying capacity. Shielded connectors fit power module faceplate on front side in accordance with MicroTCA specification. Available in single-port or dual-stacked configuration for redundant input feeds, board-mount connectors include...
Read More »Card Edge Connectors accept 0.062 in. thick add-in card.
Designed for surface-mount (SMT) termination, PCI ExpressÃ-® card-edge connectors feature 0.1 mm lead coplanarity and SMT retention clips at both ends to provide mechanical strength after soldering. Vertical units offer 36, 64, 98, or 164 contacts to support x1, x4, x8, or x16 high-speed, serial PCI Express lanes. Connectors for through-hole solder, press-fit, or straddle-mount termination...
Read More »
Power Connectors provide high current carrying capacity.
Providing current-carrying capacity of up to 20 A per contact and voltage rating of 150 V, AirMax VSÃ-® power connectors feature flat contacts and enable use of high conductivity base metal. Available as right-angle header and vertical receptacle, compact 2x2 and 2x3 connectors match 11.5 mm above-board height of VS 3-pair signal connectors. Open passages allow air flow over contact's...
Read More »
Fiber Optic Products suit military/industrial applications.
Based on Canstar(TM) technology, FCI Fiber Optics product line is comprised of fiber optic multimode/single-mode couplers, splitters, taps, wavelength division multiplexers (WDMs), cable assemblies, and adaptors. Couplers are offered for various design specifications, including one-in, many-out couplers; WDMs; and one-in, 2-out couplers available as even- or ratio-split. FCI attenuators, or...
Read More »
FCI Introduces Free Developer's Kit for Latch-N-Lok(TM) Connector Family
ETTERS, PA. (July 17, 2006) - FCI, a leading supplier of connectors and interconnect systems, introduces the Latch-N-Lok(TM) Developer's Kit, which enables designers to try this unique input-output connector without ordering new parts. The kit contains a selection of Latch-N-Lok products including popular versions with enhanced shields that are most commonly used in USB+Power applications. The...
Read More »
Multi-Lane Headers feature stamped retention clips.
Offering various termination options, 32-position vertical and right-angle headers connect multi-lane SATA or SAS cables between I/O controller cards and backplanes for disk storage arrays within storage enclosure or server. Mating interface to cable assemblies conforms to SFF-8484 specification, and connectors support up to 4 serial lanes of SATA or SAS signals as well as required sideband...
Read More »