RF Industries
San Diego, CA 92126
Share:
Wi-Fi Adapter Kit allows creation of several types adapters.
UnidaptÃ-® RFA-4024-WIFI adapter kit contains N, BNC, MMCX, Reverse-Polarity TNC, SMA, and Reverse-Polarity SMA types, all in male and female versions, plus 6 universal centers. By screwing any 2 interface adapters in kit to universal center, user can produce scores of different adapters in seconds. All adapters feature machined brass, silver-plated bodies; gold-plated contacts; and Teflon...
Read More »SMA Connectors are offered in panel-mount versions.
Suited for use in high-frequency and microwave applications where small size is required, SMA, 2-hole, panel-mount connectors are fabricated to MIL-STD-348A, Section 310 with nickel or gold plated brass bodies, Teflon insulation, and gold plated contacts. Model RSA-3261 SMA jack and RSA-3221 SMA plug have solder cups, while RSA-3262, RSA-3268, and RSSA-3269 have solder posts with flush and...
Read More »Wireless Tranceiver meets FCC narrow band requirements.
NL6000 radio-modem operates at 12 Kbps on narrow band channels and 22 Kbps on wide band channels. Using digital technology, unit is configurable to operate wireless telemetry as well as mobile data. With IP address ability and USB port, connectivity to LANs is possible. Transmit power, adjustable from 1-6 W, allows mobile, fixed, and solar operations. Power requirements are from 11-16 Vdc. Unit...
Read More »Cable Assemblies meet IEEE 802.11 standards.
MHF jumpers satisfy IEEE 802.11, Bluetooth(TM) and FCC Part 15 standards for wireless applications including WLAN, RF Test Points, and PDA devices. Jumpers use low profile connectors that occupy minimal board space while providing VSWR rating of 1.3 max. up to 6 GHz. TeflonÃ-® cables are used in RFW-10506-XX, MHF plug to MHF plug; RFW-10507-XX, MHF plug to pigtail; RFW-10508-XX, MHF plug to...
Read More »Installation Tools suit wire and cable modifications.
Cutters, strippers, and crimpers are available for wire and cable and some have multiple functions. Cutters are designed for small wire and coax, and aluminum and copper cable from 2 AWG to 250 mmÃ-². Strippers are designed for wire from 30-10 AWG, coaxial cables up to .600 in. dia, multi-conductor cables, and CAT 5 & 6 wires and cables. Crimpers are designed for insulated and non-insulated...
Read More »Coaxial Connectors satisfy FCC Part 15 interface requirements.
RPL positive locking, sub-miniature connectors feature 50 ohm impedance and are used at frequencies from DC to 8 GHz in RF applications. At 6 GHz, they perform with VSWR of less than 1.2. All are made of nickel-plated, machined brass bodies, gold-plated contacts, and Teflon insulation. Quick-disconnect locking mechanism ensures that interconnect will not disengage during use. Minimum retention...
Read More »Universal Adapters are offered separately or in kits.
UnidaptÃ-® Line of male and female coaxial adapters are made of machined brass with TeflonÃ-® insulation, silver-plated bodies, and gold-plated contacts. RFA-4018 kit contains coaxial cable tester with UnidaptÃ-® terminals and full assortment of UnidaptÃ-® adapters. RFA-4018-20 UnidaptÃ-® cable tester is designed to test coaxial cables for shorts, open conductors, and open...
Read More »Connector suits board-to-panel feed-through applications.
Model RFS-2030 is constructed of nickel plated machined brass with Teflon insulation and silver plated phosphor bronze contact. Bulkhead seal is inset GR70 nitrile O-ring. Connector is mounted using 4 posts with standoffs spaced .400 in. on center. Featuring voltage rating of 1,500 V peak and insulation resistance of 5 K milliohms max, RFS-2030 is designed for applications with frequency range of...
Read More »Connectors/Cable Assemblies suit telecommunications hardware.
RFH Series Connectors are low profile MHF coaxial connectors with mounting area of 3 mm x 3 mm on PCB and 2 mm height when mated. Cable assemblies test frequency rating VSWR of 1.3 max up to 6 GHz. MHF connectors have nominal impedance of 50 ohms with dielectric withstanding voltage of 150 Vac rms and temperature range of -40 to +90Ã-
Read More »Receiver/Transmitter may be battery powered.
Receiver/Transmitter is designed for camera security systems. Multiple antenna inputs for receiver offer true diversity allowing for continued image quality. Broadcast video and audio are available in ISM license free bands. Units are available in UHF and 900 MHz areas as well.
Read More »