RF Industries

Plenum Rated Low PIM Cable Assemblies suit DAS applications.

Plenum Rated Low PIM Cable Assemblies suit DAS applications.

Suited for applications on DAS (Distributed Antenna Systems) and wireless infrastructure, 4.1/9.5 (Mini) DIN male connectors are terminated onto Times Microwave plenum rated low PIM cables SPP-250-LLPL and TFT-402-LF. While SPP-250-LLPL™ is Â-¼ in. flexible corrugated cable, TFT-402-LF is flexible, flat braided, low minimum bend radius cable similar to semi-rigid .141 cable. Both cables...

Read More »
Fiber Optic Trunk Cables/Assemblies serve wireless applications.
Electronic Components & Devices

Fiber Optic Trunk Cables/Assemblies serve wireless applications.

Factory terminated fiber optic trunk cables utilize Corning FREEDM™ One fiber trunk cable. Available with 6 strand single mode or multi-mode, 12, 24, or 36 strand single mode configurations, trunk cables are flame retardant and UV resistant and can be used for indoor, outdoor, or direct burial applications. Fiber optic trunk cables are terminated with Corning LC or SC connectors with 2 m...

Read More »
Coaxial Cable Assemblies suit in-building DAS applications.
Construction Equipment and Supplies

Coaxial Cable Assemblies suit in-building DAS applications.

Intended for Distributed Antenna Systems, Coaxial Cable Assemblies efficiently transfer RF signal, minimize interference caused by intermodulation, fit into tight spaces, and are plenum-rated to meet building fire codes. Times Microwave SPP-250-LLPL™Ã‚- consists of small diameter corrugated cable, while TFT-402-LF is extremely flexible with low minimum bend radius. Available in...

Read More »
Ruggedized Fiber Jumpers ensure reliable wireless performance.
Electrical Equipment & Systems

Ruggedized Fiber Jumpers ensure reliable wireless performance.

Featuring IP66/67 ratings, LC-LC Duplex Fiber Jumpers are manufactured with Corning FREEDM® One cable and terminated with harsh environment connectors with strain reliefs that exceed 56 lb of pull. Operating from -40 to +70°C, assemblies are suited for wireless systems with remote radio head designs that are installed outside and require ruggedized fiber-to-the-antenna cabling.

Read More »
DC Power Cables target wireless industry.
Electrical Equipment & Systems

DC Power Cables target wireless industry.

Designed to support Fiber-to-the-Antenna applications, Outdoor DC Power Cables include 2 conductor 8 gauge, 2 conductor 10 gauge, 2 conductor 12 gauge, and 6 conductor 8 gauge insulated tinned copper wires rated for 600 V. UL Type TC approved units have sunlight-resistant PVC jacket and are approved for direct burial applications. Indoor DC Power Cable, TelcoFlex® III by Southwire, is...

Read More »
N Male Connectors simplify installation on coax cables.
Construction Equipment and Supplies

N Male Connectors simplify installation on coax cables.

Simplifying installation of RF connectors onto high-performance coax cable, RFN-1006-49I with solderless captive pin and RFN-1006-4I with crimp pin eliminate need to trim braid during cable prep. Combination hex/knurl coupling nuts allow tightening by hand/wrench, while white bronze plating eliminates tarnishing, promotes electrical performance, and reduces PIM (Passive Intermodulation). VSWR of

Read More »
Custom Hybrid Cables facilitate remote radio head installation.
Electrical Equipment & Systems

Custom Hybrid Cables facilitate remote radio head installation.

Suited for wireless carriers updating their networks to 4G technologies, WiMAX, LTE, etc., OptiFlex(TM) hybrid cabling solutions come in deployment lengths up to 550 ft with less than 10% voltage drop (based on radio power up to 950 W). Coax, multiple fiber, Ethernet, and power cables are bundled within rugged UV-, heat-, and moisture-resistant PVC outer jacket that can withstand harsh weather...

Read More »
Test Port Connection Adapter minimizes wear on connector interface.
Construction Equipment and Supplies

Test Port Connection Adapter minimizes wear on connector interface.

Used when testing 7-16 DIN connectors and assemblies, P2RFD-1660-SS Conector Saver adapter allows hundreds of tests, even PIM testing, to be performed before wear dictates replacement of test port adapter. It installs on test port and is machined to exacting specifications with white bronze plated body and stainless steel coupling nut. Also, any misaligned matings will damage connector saver and...

Read More »
Electrical Equipment & Systems

Test Adapters are available in 3.5 mm size.

P2RFA-4031-01 kit features three 3.5 mm adapters with 50 ohm impedance and made of non-magnetic 303 stainless steel with beryllium copper contacts supported with bead configuration. They are designed to operate up to 34 GHz with a VSWR rating of 1.05+.006 f (f-GHz) max and have same electrical length. Coaxial connectors and adapters inter-mate with SMA and 2.9 mm connectors and are used primarily...

Read More »
7-16 DIN Adapter Kit is available with white bronze plating.
Construction Equipment and Supplies

7-16 DIN Adapter Kit is available with white bronze plating.

RFA-4013-WB adapter kit offers means to bridge type N devices to 7-16 DIN interfaces. White Bronze plating, which is tarnish free and exhibits optimal electrical performance as well as minimal passive intermodulation, withstands multiple mating cycles. All six white bronze 7-16 DIN adapters contained in this foam-lined, zippered kit are machined from brass and feature Teflon® insulation and...

Read More »

All Topics