Seco Tools
Troy, MI 48083
Steadyline(TM) Turning Bars perform static and rotating operations.
Steadyline™ Turning Bars feature GL connection that hasÃ- polylobe taper interface with two 180Ã-
Read More »Square Shoulder Milling Cutters handle tough materials.
Featuring precision milled pocket seats and integrated through-coolant channels, Turbo 10 Series includes both direct pressed and ground insert alternatives with corner radii ranging from 0.016–1.122 in. Geometries for ground inserts provide optimized performance in challenging materials, such as aluminum, stainless steels, and titanium alloys. Available in diameters from 0.75–2 in., helical...
Read More »Seco to Showcase Powerful Machining Solutions for Modern Materials at AeroDef
TROY, Mich. - At the AeroDef Manufacturing Conference and Exhibition, co-located with Composites Manufacturing 2013, taking place March 19 - 21 at the Long Beach Convention Center in California, Seco Tools will showcase several advanced tooling solutions for the efficient and precise milling and turning of difficult-to-machine aerospace materials in booth 132. Whether AeroDef attendees are...
Read More »Solid Carbide Drills are for machining aerospace materials.
Feedmax(TM) -N solid carbide drills, suited for drilling in aluminum and non-ferrous materials, feature low-silicon coating that suits machining of aluminum with less than 10% silicone, as well as brass, zinc, and magnesium. Tools have conical front clearance with 12Ã-
Read More »Solid Carbide 30xD Drill suits deep hole drilling applications.
Available in diameters from 4-10 mm, Feedmax(TM) SD230A features 4-facet point geometry that provides optimal centering capability, with primary and secondary relief angles and point angle of 136Ã-
Read More »Seco Tools to Showcase Processes and Products for the Oil and Gas Industry at HOUSTEX 2011
Troy, Michigan- Seco Tools will be demonstrating a range of processes and products relevant to the oil and gas industry at HOUSTEX 2011. The company will exhibit its products in booth #1100 at the event, which takes place April 18 - 20 at the George R. Brown Convention Center in Houston, Texas. In its booth, Seco will be presenting information on its new single-pass threading process for...
Read More »Seco Tools to Showcase Wide Range of Tooling Solutions at AeroDef Manufacturing 2011
Troy, Michigan - Seco Tools will be demonstrating a comprehensive range of tooling solutions for aerospace and defense applications at AeroDef Manufacturing 2011. The company will exhibit its products in booth #1778 at the event, which takes place April 5 - 7 at the Anaheim Convention Center in Anaheim, California. In recent years, Seco Tools has concentrated heavily on developing tooling...
Read More »Solid Carbide Drills are designed for working with carbon fiber.
Feedmax(TM) drills avoid delamination upon entry or exit when drilling in carbon fiber reinforced polymer (CFRP) materials. While -C1 geometry features sharp, optimized double points, -C2 geometry is designed to drill stacked CFRP with aluminum or titanium outer layer. Polycrystalline diamond coating combats abrasive properties of CFRP while also promoting dimensional tolerance. Drills are 5xD,...
Read More »PCBN Inserts machine hardened steels and irons.
Series CBN350 Solid Inserts, available in round or square shaped models, offer reduced chipping and edge flaking in difficult-to-machine materials. Able to perform at fast feed rates and low cutting speeds, inserts are suited for machining chilled or white cast irons and manganese steel components.
Read More »Insert Grade machines gray, ductile, or malleable cast iron.
Type TX100 cast iron grade is available in broad range of insert shapes and geometries including CNMG and WNMG in MR7 geometry. Suited for variety of applications, from medium roughing to finishing, TX100 targets automotive, foundry, and agricultural industries.
Read More »Seco Tools to Partner with Fusion Coolant Systems to Drive Forward Corporate Environmental Sustainability Efforts
April 2021 - In an effort to become more sustainable in its machining practices, Seco Tools has partnered with Fusion Coolant Systems (Fusion), which offers an environmentally-friendly coolant technology that can lower overall carbon footprint while increasing overall performance. Both companies have a goal to make machining easier and more effective for manufacturing leaders and engineers, while...
Read More »Save Time and Boost Productivity with the New Seco Assistant App by Seco Tools
Troy, MI, September 11, 2020 — Seco Assistant puts the product information and tools you really need at your fingertips without the need for internet searches or catalog research, even when you are offline. Seco Assistant’s machining calculator gives you turning, milling and holemaking data for any brand including feeds, speeds and material removal rate. The Tool Comparison function gives you...
Read More »Seco Tools Has Acquired The Cutting Tool Division of QCT in Mexico
Fagersta, SE, June 1, 2020 — Seco has completed the acquisition of the cutting tool division of Quimmco Centro Tecnológico (QCT), a subsidiary of the Quimmco Group. The cutting tool division acquired from QCT has three locations in Mexico to support customers and is a leading solid carbide tooling manufacturer, specializing in custom products and reconditioning. “With this acquisition we...
Read More »Seco Tools Promotes David Sonner to Eastern Zone Manager
Troy, Mich., May 20, 2020 — To help develop and drive the North American sales strategy, Seco Tools has promoted David Sonner to be the new Eastern Zone Manager, effective beginning of May, 2020. “Dave has a strong background in sales leadership prior to Seco and has demonstrated his ability to deliver results, drive change, and challenge the status quo over the past two years as Manager –...
Read More »Seco Tools Adds Bill Barcelona as Director of Customer Experience
TROY, Mich., April 9, 2019 – To maximize customer engagement and satisfaction, Seco Tools has named Bill Barcelona as Director of Customer Experience. In this new role, Barcelona and his team will address rapidly evolving customer needs to enhance sales and service responsiveness further throughout the company. At Seco, Barcelona's responsibilities will include automating and streamlining...
Read More »New Seco Steadyline-® Tooling Additions Deepen Turning Capabilities
TROY, Mich., December 17, 2018 – Seco Tools has expanded its long-reach turning and boring solutions with additions to its well-known series of Steadyline® vibrationdamping turning/boring bars and their respective heads. The new additions include 1.00 (25 mm) diameter Steadyline® bars, GL25 turning heads and 4.00 (100 mm) diameter Steadyline® bars, along with a range of rough and fine boring...
Read More »Seco Wins Supplier Award from Distributor Organization
TROY, Mich., November 27, 2018 – Seco Tools was awarded Supplier of the Year at the 2018 gathering of the Affiliated Distributors Industrial Members, Suppliers and Service Providers in Orlando, Florida. Seco Tools received the award as a Tier 2 supplier, representing those companies with which distributors conduct $8 million or more of business. Our distributors are our biggest asset because...
Read More »Seco Tools Announces New Manager of Engineering Services
TROY, Mich., October 11, 2018 – Seco Tools has named Tyler Martin as its new manager of engineering services. Formerly the manager of technical services, Martin previously oversaw the Technical Center at Seco’s headquarters in Troy, Michigan. In addition to the Technical Center, Martin will now also manage Seco’s Engineered Solutions team, working closely with customers to assist in the...
Read More »Seco Consultancy Services Launches at IMTS
TROY, Mich., September 10, 2018 – Seco Consultancy Services (SCS) launched at IMTS 2018. The services – provided by a global team of highly educated and dedicated experts – helps manufacturers navigate the future of manufacturing and maximize their business success. With more than 20 production sites and 80 years of metal cutting experience, SCS brings together a unique blend of experience...
Read More »Seco Tools Joins OMIC R&D as Manufacturing Industry Partner
Brings total OMIC partners to 20 at Scappoose, Oregon facility TROY, Mich., September 21, 2018 – The Oregon Manufacturing Innovation Center Research and Development (OMIC R&D) continues to grow its company membership with the recent addition of global cutting tools manufacturer Seco Tools, LLC. With a total now of seventeen manufacturing industry partners and three Oregon public universities,...
Read More »