Seco Tools

Seco Presents Jabro-Solid2 JS750 End Mills That are Designed for Aerospace Applications
Laboratory and Research Supplies and Equipment

Seco Presents Jabro-Solid2 JS750 End Mills That are Designed for Aerospace Applications

The Jabro®-Solid2 JS750 End Mills consist of JS754 and JS755 models that can handle materials such as ISO M (stainless steel) and S (heat-resistant superalloys and titanium). The geometries of the units optimize side milling, roughing and slotting, advanced roughing and dynamic milling operations. The cutters come with smooth peripheral rake faces and strong radius design that evacuate the chips...

Read More »
Seco Tools Introduces PCBN Inserts in New Grade Format and Geometries
Construction Equipment and Supplies

Seco Tools Introduces PCBN Inserts in New Grade Format and Geometries

The Polycrystalline Cubic Boron Nitride Inserts come in new long WL and short WS wiper radii and laser-etched chip breakers. The WL wiper inserts enable 100 percent feed-rate increase whereas the WS wiper insert’s cutting forces are reduced by 15 percent for enhanced machining in low-stability conditions. The CBN150 solid insert grade inserts deliver high-surface quality during light...

Read More »
New Seco LP09 Inserts are Offered with Dual Cutting Edges
Construction Equipment and Supplies

New Seco LP09 Inserts are Offered with Dual Cutting Edges

The Seco LP09 Inserts designed for use with HighFeed 2™ cutter bodies and are suitable for high milling operation such as face, helical interpolation, slotting, side milling, pocketing and plunging. These rectangular shape inserts feature close-pitched cutter bodies that help to extend tool life. They are available in full range of chip breakers such as MD15, M13 and ME08 and in sizes ranging...

Read More »
Turning Insert Grades Provide Edge Toughness and Chip Resistance

Turning Insert Grades Provide Edge Toughness and Chip Resistance

Seco Tool’s has expanded its product range with the TH1000 and TH1500 turning insert grades. The TH1000 is applicable in finishing operations and hardened steel cutting. The TH1500 provides finish turning to grey and ductile cast irons and is applicable with low-to-moderate cutting speeds. Both turning insert grades are expected to increase the machining capabilities of Seco Tools.

Read More »
Seco Offers Steadyline Turning/Boring Bars with Vibration Dampening System
Food Processing & Preparation

Seco Offers Steadyline Turning/Boring Bars with Vibration Dampening System

The Steadyline™ Turning/Boring Bars are available with 25 mm diameter Steadyline bars and GL25-turning heads. The GL25-turning heads covers 16 turning heads with general turning, recessing and back boring heads. The bars with GL25 workpiece side connection are designed for 6xD, 8xD and 10xD reaches. The steadyline units feature GL connection to provide 180° head orientation and firm mounting...

Read More »
Seco Offers 335.14 Disc Mills to Ensure Taper-Free Deep-Hole Threading
Architectural & Civil Engineering Products

Seco Offers 335.14 Disc Mills to Ensure Taper-Free Deep-Hole Threading

The 335.14 Disc Mills are offered with interchangeable threading heads and matching holder shanks. The shanks come in carbide and steel types with internal cooling capability in metric sizes ranging from 11.7 mm to 21.7 mm with profile pitch between 1 mm and 6 mm. These full profile heads are available in 11.7 mm to 17.7 mm and in 11, 14 and 19 tpi pitch. The 335.14 heads generate precision...

Read More »
Latest Perfomax Indexable Insert Drills Reduce the Risk of Chip Jamming
Mechanical Components and Assemblies

Latest Perfomax Indexable Insert Drills Reduce the Risk of Chip Jamming

The Seco’s Perfomax® Indexable Insert Drills are offered in diameters between 15 m and 59 mm in length-to-diameter ratios of 2xD, 3xD, 4xD and 5xD. The Performax flutes come with helix angles and special anti-friction surfaces that reduce contact between chips and flute surfaces. They generate shorter chips, which evacuates easily and quickly for lowering the risk of chip jamming for high...

Read More »
Seco Introduces Jabro-HFM JHF181 End Mills with HXT Coating
Laboratory and Research Supplies and Equipment

Seco Introduces Jabro-HFM JHF181 End Mills with HXT Coating

The Jabro®-HFM JHF181 Solid-Carbide End Mills is offered in 2-, 4- or 5-flute options with diameters ranging from 2 mm to 16 mm and lengths between 2xD and 7xD. The units are suitable for high-speed milling strategies in hardened steels and nickel-based alloys. These end mills has through-tool coolant capability for diameters between 6 mm and 12 mm. The HXT coating forms hard layer on JHF181...

Read More »
Seco Presents Jabro-Solid2 JS750 End Mills That are Designed for Aerospace Applications
Laboratory and Research Supplies and Equipment

Seco Presents Jabro-Solid2 JS750 End Mills That are Designed for Aerospace Applications

The Jabro®-Solid2 JS750 End Mills consist of JS754 and JS755 models that can handle materials such as ISO M (stainless steel) and S (heat-resistant superalloys and titanium). The geometries of the units optimize side milling, roughing and slotting, advanced roughing and dynamic milling operations. The cutters come with smooth peripheral rake faces and strong radius design that evacuate the chips...

Read More »
Company News

New Seco Steadyline® Tooling Additions Deepen Turning Capabilities

TROY, Mich., December 17, 2018 – Seco Tools has expanded its long-reach turning and boring solutions with additions to its well-known series of Steadyline® vibrationdamping turning/boring bars and their respective heads. The new additions include 1.00" (25 mm) diameter Steadyline® bars, GL25 turning heads and 4.00" (100 mm) diameter Steadyline® bars, along with a range of rough and fine...

Read More »
Seco Tools Introduces PCBN Inserts in New Grade Format and Geometries
Construction Equipment and Supplies

Seco Tools Introduces PCBN Inserts in New Grade Format and Geometries

The Polycrystalline Cubic Boron Nitride Inserts come in new long WL and short WS wiper radii and laser-etched chip breakers. The WL wiper inserts enable 100 percent feed-rate increase whereas the WS wiper insert’s cutting forces are reduced by 15 percent for enhanced machining in low-stability conditions. The CBN150 solid insert grade inserts deliver high-surface quality during light...

Read More »
Company News

Seco Wins Supplier Award from Distributor Organization

TROY, Mich., November 27, 2018 – Seco Tools was awarded Supplier of the Year at the 2018 gathering of the Affiliated Distributors Industrial Members, Suppliers and Service Providers in Orlando, Florida. Seco Tools received the award as a Tier 2 supplier, representing those companies with which distributors conduct $8 million or more of business. "Our distributors are our biggest asset because...

Read More »
New Seco LP09 Inserts are Offered with Dual Cutting Edges
Construction Equipment and Supplies

New Seco LP09 Inserts are Offered with Dual Cutting Edges

The Seco LP09 Inserts designed for use with HighFeed 2™ cutter bodies and are suitable for high milling operation such as face, helical interpolation, slotting, side milling, pocketing and plunging. These rectangular shape inserts feature close-pitched cutter bodies that help to extend tool life. They are available in full range of chip breakers such as MD15, M13 and ME08 and in sizes ranging...

Read More »
People in the News

Seco Tools Announces New Manager of Engineering Services

TROY, Mich., October 11, 2018 – Seco Tools has named Tyler Martin as its new manager of engineering services. Formerly the manager of technical services, Martin previously oversaw the Technical Center at Seco’s headquarters in Troy, Michigan. In addition to the Technical Center, Martin will now also manage Seco’s Engineered Solutions team, working closely with customers to assist in the...

Read More »
Turning Insert Grades Provide Edge Toughness and Chip Resistance

Turning Insert Grades Provide Edge Toughness and Chip Resistance

Seco Tool’s has expanded its product range with the TH1000 and TH1500 turning insert grades. The TH1000 is applicable in finishing operations and hardened steel cutting. The TH1500 provides finish turning to grey and ductile cast irons and is applicable with low-to-moderate cutting speeds. Both turning insert grades are expected to increase the machining capabilities of Seco Tools.

Read More »
Seco Offers Steadyline Turning/Boring Bars with Vibration Dampening System
Food Processing & Preparation

Seco Offers Steadyline Turning/Boring Bars with Vibration Dampening System

The Steadyline™ Turning/Boring Bars are available with 25 mm diameter Steadyline bars and GL25-turning heads. The GL25-turning heads covers 16 turning heads with general turning, recessing and back boring heads. The bars with GL25 workpiece side connection are designed for 6xD, 8xD and 10xD reaches. The steadyline units feature GL connection to provide 180° head orientation and firm mounting...

Read More »
Seco Offers 335.14 Disc Mills to Ensure Taper-Free Deep-Hole Threading
Architectural & Civil Engineering Products

Seco Offers 335.14 Disc Mills to Ensure Taper-Free Deep-Hole Threading

The 335.14 Disc Mills are offered with interchangeable threading heads and matching holder shanks. The shanks come in carbide and steel types with internal cooling capability in metric sizes ranging from 11.7 mm to 21.7 mm with profile pitch between 1 mm and 6 mm. These full profile heads are available in 11.7 mm to 17.7 mm and in 11, 14 and 19 tpi pitch. The 335.14 heads generate precision...

Read More »

All Topics