Dymax Corp.

Adhesive is resistant to high temperature and moisture.
Adhesives & Sealants

Adhesive is resistant to high temperature and moisture.

Intended for glass-to-glass and glass-to-metal applications, Ultra Light-Weld® 431 can be used in high-temperature and high-moisture environments while maintaining adhesion and flexibility. Product bonds upon exposure to UV/Vis light for immediate use in assembly process, and minimal shrinkage reduces stress on bond line or larger cured surfaces. This adhesive may also be considered for use...

Read More »
Water-Dilutable Oligomer exhibits water resistance after cure.
Laboratory and Research Supplies and Equipment

Water-Dilutable Oligomer exhibits water resistance after cure.

Providing water-barrier coating with anti-fogging characteristics, Bomar™ XR-9416 contains no water but is infinitely dilutable. Uncured 100%-solids material has viscosity of 7,000 cP at 25°C and is suited for wood coatings. When water penetrates wood,Â- wood swells at surface and optimizes adhesion of coating without need for separate primer step, resulting in tack-free, tough,...

Read More »
Paints & Coatings

Conformal Coating eliminates need for additional processing.

Specially formulated to cure in shadowed areas underneath components on printed circuit boards, Dual-Cure 9482 is tack-free immediately after curing, helping to avoid defects such as fingerprints. Light- and moisture-cure coating is engineered for thicknesses up to 0.010 in. and demonstrates optimal re-workability. Fluorescing vivid blue when exposed to UV light, 9482 enables obvious detection of...

Read More »
Hand-Held Spray Guns handle medium- and high-viscosity fluids.
Explosives, Armaments, and Weaponry

Hand-Held Spray Guns handle medium- and high-viscosity fluids.

Available in standard- and high-flow models, Series SG-100 facilitates manual spraying of materials for masking and coating applications. Pneumatically operated systems can dispense from pressurized cartridges, bottles, and pails. All wetted components are stainless steel, Teflon®, or Kalrez® for compatibility with variety of fluids. With adjustment of material flow and spray...

Read More »
Valve Dispensing System is built for accuracy, consistency.
Fluid & Gas Flow Equipment

Valve Dispensing System is built for accuracy, consistency.

Utilizing pneumatic, NC diaphragm valve, Model 475 dispenses low- to high-viscosity fluids. Design of internal diaphragm and adjacent parts prevents migration of fluid into actuating section within valve, while diaphragm toughness and materials selection for component construction promote extended life between maintenance schedules. Along with 25 micron air filter regulator, features include...

Read More »
Strippable Mask for Electronic Applications Cures in Seconds to Maximize Production Speed
Electronic Components & Devices

Strippable Mask for Electronic Applications Cures in Seconds to Maximize Production Speed

Easily dispensed for accurate placement Torrington, Connecticut - Dymax Corporation's Ultra Light-Weld® 9-20479-B is a blue, peelable masking material that cures in seconds when exposed to UV/Visible light. This material is designed for rapid masking of electronic components and assemblies, provides protection from reflow or wave soldering operations, and shields keep-out areas during...

Read More »
FIP Gasketing Resin Offers Significant Advantages Over Traditional Gasketing Materials
Adhesives & Sealants

FIP Gasketing Resin Offers Significant Advantages Over Traditional Gasketing Materials

In-line curing allows for increased production speed, lower processing costs, and reduced inventories. Torrington, Connecticut - Dymax Corporation's See-Cure GA-140-SC is a UV/Visible light-curable, Form-In-Place (FIP), Cure-In-Place (CIP) gasketing resin that is ideal for applications requiring soft, tack-free, flexible gaskets for sealing fuel cells, critical electronic assemblies such as LCD...

Read More »
Adhesives & Sealants

Fast-Curing LCP Adhesive Provides Instant Bonds on Speaker Substrates

Curing speed enables faster processing and reduces cost Torrington, Connecticut - DYMAX Corporation's Ultra Light-Weld® 9671 is a UV/Visible light-curable adhesive designed for bonding LCP (liquid crystal polymer) on microspeaker housings. Curing completely in as little as five seconds upon exposure to long wave UV and/or visible light, 9671 provides environmentally resistant, high-strength...

Read More »
Dymax Ultra Light-Weld® 3013 Adhesive Bonds Dissimilar Materials in Seconds
Adhesives & Sealants

Dymax Ultra Light-Weld® 3013 Adhesive Bonds Dissimilar Materials in Seconds

Rapid curing maximizes production speed Torrington, Connecticut - Dymax Corporation's Ultra Light-Weld® 3013 is a resilient, low-viscosity, moisture-resistant adhesive designed for rapid bonding to a wide variety of plastic and metal substrates. The product forms high-strength, environmentally resistant bonds for appliance assembly, bond joint and sealing, plastic window bonding, and...

Read More »
Manual Dispensing Systems Feature Hand-Held Valve for Easy Operation
Fluid & Gas Flow Equipment

Manual Dispensing Systems Feature Hand-Held Valve for Easy Operation

High-quality, precision regulator provides precise fluid control Torrington, Connecticut - Dymax Corporation's manually controlled dispensing systems facilitate accurate dispensing through the use of a unique, normally closed, hand-held Model 200 diaphragm valve. The diaphragm valve is designed with a very lightweight, wand-style body to make it more ergonomic for users. The versatile, turn-key...

Read More »

All Topics