Dymax Corp.
Torrington, CT 06790
Flood Lamps cure UV adhesives and coatings.
Ultraviolet CURE ZONE 2 and CURE ZONE HO2 are equipped with shielded, hinged access doors and height adjustable, replaceable work surfaces and provide complete viewing of curing process. With 11 x 10 in. footprint, CURE ZONE HO2 models have 5 x 5 in. curing area and emit 120 mW/cmÃ-² of curing power, while CURE ZONE 2 models have 8 x 8 in. curing area and emit 80 mW/cmÃ-². Systems are...
Read More »
Potting Compound cures quickly in thick applications.
Trigger Cure(TM) compound cures at room temperature to depths of 1 in. or more, and in areas under components where light does not reach. Two-part compound is applied with typical disposable-tip, static mix dispensers. Exposure to long-wave UV light cures product to depth of 1/4 inch in 20 seconds or less; remaining liquid resin gels in 7 to 20 minutes. Full cure is achieved in 24 hours at room...
Read More »
Adhesives bond glass to glass, plastic, and metal.
Line of 9 adhesives used for glass assembly provide invisible bonds, high clarity and adhesion, and resistance to moisture and thermal cycling. Solvent-free glass bonders form acceptable coatings and seals for glass, plastic, and metal substrates. Formulated to cure in seconds when exposed to moderate intensity 365 nm wavelength UV light, bonders achieve full cure in 30 sec. Viscosities from...
Read More »
Rod Lenses deliver uniform UV cures.
BlueWave(TM) 200 W UV spot/wand light, fitted with rod lens assembly, provides uniform illumination for curing adhesives and coatings from .75 x .75 up to 5 x 5 in. Rod lens No. 38699 cures adhesive or coating areas from 3/4 in. square at 1,500 mW/cmÃ-² to 2 in. square at 115 mW/cmÃ-². Rod lens No. 38698 cures adhesive or coating areas from 2 in. square at 125 mW/cmÃ-² to 5 in. square...
Read More »Adhesives suit industrial assembly applications.
Exhibiting little or no crazing, blooming, or odor, 301 Series adheres to various substrates. Multiple grade cyanoacrylates are suitable for acetyl, nylon, rubber, and opaque plastics such as polyethylenes, acrylics, and polycarbonates.
Read More »
Low-Shrink Adhesives provide doublet and lens bonding.
High-clarity, UV/visible light-curing adhesives offer viscosities from 300 to 25,000 cP and elongation from 120 to 175%. Fiber-optic adhesives include OP-52 medium-viscosity grade and OP-54 low-viscosity, wicking grade for butt bonding, bundling, and splitting. OP-18 may be peeled off like tape, and OP-19 and OP-19G are water soluble grades. Adhesives cure in seconds and offer moisture...
Read More »
Lens Bonding Adhesives have unlimited pot life.
Optically clear, low movement, low shrinkage lens assembly adhesives include UV blocking grades, which exhibit excellent adhesion to PVA, CR-39, and CAP, and provide UV/visible protection to 410 nm. Design eliminates birefringence. Low shrinkage, low outgassing opaque adhesives are available in viscosities from thin wicking grades to thixotropic gels. Adhesives cure when exposed to low/medium...
Read More »
UV Curable Epoxies provide durable bonds quickly.
Formulated to cure rapidly, epoxies produce slick, smooth, dry surfaces that provide bonding, sealing and protective coatings in seconds, and reach full strength in 1-24 hr. Cured epoxy bonds exhibit low shrinkage and outgassing properties and offer good solvent and temperature resistance. They adhere to glass, metal and wide variety of plastics. Surface treatment provides adhesion to some...
Read More »
Lens Bonding Adhesives are optically clear.
Lens assembly adhesives for precision bonding, mounting, laminating, and fixturing applications have good adhesion to lens construction materials and to most metal, coated or painted frames and holders. Applications include cameras, microscopes, as well as eyeglass and sunglass lenses. Special UV blocking grades are available that adhere to PVA, CR-39, and CAP. These flexible lens bonders provide...
Read More »