Dymax Corp.
Torrington, CT 06790
New Encapsulant with Improved Moisture and Thermal Resistance
Multi-Cure® 9037-F cures in seconds upon exposure to UV/visible light and has secondary heat cure for shadow areas caused by high-profile components on printed circuit boards. Material features improved flexibility and resiliency for a variety of glob-top, chip-on-board, chip-on-flex, chip-on-glass and wire-tacking/bonding applications. Ideal for use as a corrosion guard for wire-bond...
Read More »
New Cationic Epoxy Features Low Water Absorption
MD® 250-CTH is fully curable with broad-spectrum UV/Visible light at 365 nm, 385 nm, or 405 nm and/or with heat at 80-85°C to enable low-temperature heat-cure in 20-35 minutes. Formulated for manufacturers that require low shrinkage for lens alignment and cementing of endoscope/microscope lenses. Heat-only curing functionality is ideal for ensuring complete cure in true dark-shadow areas.
Read More »
Dymax Presents BlueWave MX-275 Flood-Curing System That Offers Uniformity Across the Cure Area
The BlueWave® MX-275 UV LED Flood-Curing System uses emitters with 365, 385, or 405 nm wavelengths. The system delivers light energy in a line pattern that allows for consistent curing of batches. It can be set up as bench-top unit on an array stand or installed on automated curing processing equipment. Each emitter of the system offers 5 mm x 50 mm curing area when paired with a multichannel...
Read More »
Dymax Presents BlueWave MX-Series Multichannel Controller with PLC Activation
The BlueWave® MX-Series Multichannel Controller is offered in 2- and 4-channel versions with CE certifications. The controller is designed to power up to four emitter stations at once independently or in combination. The device is compatible with BlueWave MX-150 spot curing and flood curing and MX-2575 light bar system with VisiCure®, RediCure®, or PrimeCure® emitters. It comes with an LCD...
Read More »
Dymax Light-Curable Adhesives Formulated with Encompass™ Technology to be Showcased at MD&M West
Torrington, Connecticut – January 16, 2017 - Dymax Corporation, a leading manufacturer of adhesives to the disposable medical device industry, will exhibit in Booth #2159 at MD&M West, scheduled to take place February 5-8, 2018 at the Anaheim Convention Center in Anaheim, CA. Their newest products and technologies – including solvent free, USP Class VI, and ISO 10993 biocompatible...
Read More »
LED Flood-Curing System features touchscreen interface.
BlueWave® MX-250™ LED Flood-Curing System comes in three wavelength LED options such as 365, 385, or 405 nm. Unit comes with high-intensity emitter and offers curing intensities which cover 50mm x 50mm area. Product is equipped with controller which helps to run MX-150™ spot-cure emitters.
Read More »
Dymax SpeedMask Masking Resins to be Showcased at MRO Europe
Torrington, Connecticut – August 28, 2017 - Dymax Corporation will showcase SpeedMask® line of masking resins in Booth # 2021 at MRO Europe, scheduled to take place October 3-5, 2017 at ExCel, London- UK. Attendees will get the chance to discover how SpeedMask solvent free light-curable maskants replace tapes, waxes, lacquers and fixtures, while offering reliable protection against most...
Read More »
Dymax to Introduce New Small-Gauge Needle Bonding Adhesive at MD&M East 2017
Torrington, Connecticut – June 2, 2017 - Dymax Corporation, a leading supplier of adhesives to the disposable medical device industry, will exhibit in Booth #1357 at MD&M East, scheduled to take place June 13-15, 2017 at the Jacob Javits Convention Center in New York. Their newest products and technologies – including MD® 1406-M, a next generation needle bonding adhesive – will be...
Read More »
Needle Bonding Adhesive enhances performance on smaller cannulas.
Suitable for small gauge needle applications, MD® 1406-M Needle Bonding Adhesive reduces chance of cannula substrate failure. Allowing tighter standard deviations, product is optimized for 385 nm LED curing. Product helps manufacturers with use of LED curing without affecting speed and cured mechanical properties.
Read More »
Multi-Cure® 9452-FC Coating is heat and light curable.
Featuring low viscosity of 20 cP, Multi-Cure® 9452-FC Coating is suitable for rapid conformal coating of printed circuit board and electronic assemblies. Compatible with different spray equipment, product fluoresces vivid blue when exposed to UV light. 9452-FC provides electrical insulation properties and offers resistance to humidity, thermal shock and corrosion.
Read More »Dymax Corporation Celebrates 40th Anniversary
Company Commemorates Four Decades as an Innovator in High-Tech Rapid Light-Cure Solutions TORRINGTON, Conn., July 30, 2020 /PRNewswire/ -- Over the past forty years, Dymax Corporation has built a tradition of excellence providing manufacturers with adhesive chemistry and equipment solutions for a variety of applications within the medical device, automotive, electronics, and aerospace and...
Read More »
New Encapsulant with Improved Moisture and Thermal Resistance
Multi-Cure® 9037-F cures in seconds upon exposure to UV/visible light and has secondary heat cure for shadow areas caused by high-profile components on printed circuit boards. Material features improved flexibility and resiliency for a variety of glob-top, chip-on-board, chip-on-flex, chip-on-glass and wire-tacking/bonding applications. Ideal for use as a corrosion guard for wire-bond...
Read More »
New Cationic Epoxy Features Low Water Absorption
MD® 250-CTH is fully curable with broad-spectrum UV/Visible light at 365 nm, 385 nm, or 405 nm and/or with heat at 80-85°C to enable low-temperature heat-cure in 20-35 minutes. Formulated for manufacturers that require low shrinkage for lens alignment and cementing of endoscope/microscope lenses. Heat-only curing functionality is ideal for ensuring complete cure in true dark-shadow areas.
Read More »Dymax Corporation to Host Webinar on Benefits of Light-Curing Technology
Tailored for Medical Device Manufacturing Torrington, Connecticut – June 17, 2019... Dymax Corporation will be hosting a complementary webinar titled “Medical Device Manufacturing: Benefits of Light-Curing Technology“ on Wednesday, June 27, at 2 pm Eastern Time. The webinar will provide real-life examples on how the newest light-curable materials can simplify process validation, provide...
Read More »Dave Koppenhaver Joins Dymax Corporation as Director of Sales, Americas
Torrington, Connecticut – May 20, 2019... Dymax Corporation is pleased to announce the appointment of Dave Koppenhaver as the new Americas Director of Sales. Koppenhaver will be responsible for achieving revenue growth targets in adhesives and equipment, while continually elevating Dymax commercial effectiveness with partners. Having spent the past 20 years in the industrial manufacturing...
Read More »
Dymax Presents BlueWave MX-275 Flood-Curing System That Offers Uniformity Across the Cure Area
The BlueWave® MX-275 UV LED Flood-Curing System uses emitters with 365, 385, or 405 nm wavelengths. The system delivers light energy in a line pattern that allows for consistent curing of batches. It can be set up as bench-top unit on an array stand or installed on automated curing processing equipment. Each emitter of the system offers 5 mm x 50 mm curing area when paired with a multichannel...
Read More »
Dymax Presents BlueWave MX-Series Multichannel Controller with PLC Activation
The BlueWave® MX-Series Multichannel Controller is offered in 2- and 4-channel versions with CE certifications. The controller is designed to power up to four emitter stations at once independently or in combination. The device is compatible with BlueWave MX-150 spot curing and flood curing and MX-2575 light bar system with VisiCure®, RediCure®, or PrimeCure® emitters. It comes with an LCD...
Read More »
Dymax Light-Curable Adhesives Formulated with Encompass™ Technology to be Showcased at MD&M West
Torrington, Connecticut – January 16, 2017 - Dymax Corporation, a leading manufacturer of adhesives to the disposable medical device industry, will exhibit in Booth #2159 at MD&M West, scheduled to take place February 5-8, 2018 at the Anaheim Convention Center in Anaheim, CA. Their newest products and technologies – including solvent free, USP Class VI, and ISO 10993 biocompatible...
Read More »Robert Palmer Joins Dymax Corporation as Global Electronic Business Development Director
Torrington, Connecticut – January 16, 2018 - Dymax Corporation is pleased to announce the appointment of Robert Palmer as the new Director, Business Development – Electronics, Global. While reporting to Dymax’ Business Development Officer, Jason Maupin, Palmer will be responsible for leading the global business development and product leadership efforts through the development of new...
Read More »Jason Maupin joins Dymax Corporation as Chief Marketing and R&D Officer
Torrington, Connecticut – December 6, 2017 - Dymax Corporation is pleased to announce the appointment of Jason Maupin as the new Chief Business Development and R&D Officer. While reporting to Dymax’ Director and Chairman, Greg Bachman, Maupin will be responsible for leading the global business development and product leadership efforts in the oligomers, equipment, electronics, and maskant...
Read More »
