Company News

SPIROL International Corporation

30 Rock Ave., Danielson, CT, 06239, USA

  • 888-789-8826

Latest New Product News from
SPIROL International Corporation

Fasteners & Hardware

Molded-in Threaded Inserts are made of 2024 grade aluminum material.

Nov 16, 2017

Molded-in Threaded Inserts come with axial grooves which increases torque resistance. Units are available in series 60 blind-end and series 61 through-hole configurations. Designed to be placed in the mold cavity, products offer resistance against corrosion and are lead-free. Inserts come in standard thread sizes of 8-32, 10-24, 1/4-20, and 5/16-18, and M4, M5, M6, and M8 for metric thread... Read More

Controls & Controllers

Mark VI Controller features 7 in. touchscreen display.

Apr 25, 2017

Mark VI Controller comes with storage capacity of 50 recipe. Equipped with capacitor bank and RS232 receptacle, unit automatically adjusts power level and synchronizes with the two independent axes of motion. Controller’s USB and Ethernet provide access for firmware update and remote web browser access respectively. Featuring input port and cable, product is enabled to remote stop/run, track... Read More

Paints & Coatings

ArmorGalv® Thermal Zinc Diffusion Coating provides zero emissions.

Dec 19, 2016

With 1,000+ hours of corrosion resistance, ArmorGalv® Thermal Zinc Diffusion Coating offers uniform deposition coating. Poised to revolutionize industrial fastener market, unit eliminates the risk of hydrogen embrittlement. Including dowel bushings, spring dowels, spacers and compression limiters, device is recognized by Environmental Protection Agency. Maximizing corrosion protection, unit... Read More

Fasteners & Hardware

Oval Compression Limiters increase tolerancing flexibility.

Sep 08, 2016

Available for plastic assemblies, Series CL400 Press-In and CL460 boh accommodate up to 2.25 mm extra clearance on one axis to provide flexibility for centerline and stack-up tolerancing. Series CL400 Oval Press-In, produced from carbon steel, consists of roll-formed, split-seam, oval compression limiter with spring tension, which provides positive retention in hole. While similar to oval... Read More

Fasteners & Hardware

Stainless Steel Coiled Spring Pins work in corrosive environments.

Feb 17, 2015

Offered in metric sizes with Ø2–Ø6 mm diameters and 8–50 mm lengths, 316 stainless steel Coiled Spring Pins feature 2¼-coil cross-section and compress when installed into host component. These self-retaining pins exhibit uniform strength and flexibility after insertion. To prevent hole damage and prolong assembly life, shock absorbing design dampens forces and vibration. Type... Read More

Fasteners & Hardware

Compression Limiters feature lightweight aluminum design.

Dec 17, 2013

Featuring knurled and grooved designs, respectively, Series CL600 and CL610 provide spot reinforcement of plastic assemblies in high stress joints where two components are joined together with bolt. Lead-free units absorb load when bolt is tightened to its recommended value and isolate plastic from excessive compressive loads, ensuring that joint remains intact throughout life of product. Read More

Machinery & Machining Tools

Drilling/Pinning Machine produces straight, accurate holes.

Oct 07, 2013

By combining drilling and pinning in one system, Model DP eliminates requirement for manufacturers to maintain tight tolerances and precision drill individual components to ensure that holes are to correct size and properly aligned in multi-component pinned assembly. Self-contained vertical system consists of automatic high-precision drilling unit, SPIROL Model CR Pin Insertion Machine, and... Read More

Machinery & Machining Tools

Manual Pin Inserter features max insertion force of 1,500 lb.

Apr 05, 2013

Constructed with cast iron frame and all heavy-duty components, Model PMH is suited for low to moderate volume levels of production that require high insertion force. Machine features fixed throat dimension of 4.7 in., stroke range of 3–7 in., and ability to install pins ranging from 1/32–3/8 in. in diameter. Through changing driving chuck and replacing fixture at base, machine... Read More

Fasteners & Hardware

Ground Hollow Dowels suit precision alignment applications.

Dec 02, 2009

Series GD100 Ground Hollow Dowels are manufactured from strip steel and are OD ground to achieve tight diameter tolerances that enable alignment up to 20 µm. Offered in standard diameters of 8, 10, 12, and 16 mm, dowels can be case-hardened for wear resistance or manufactured from heat treated, high carbon steel for greater shear strength. Read More

Packaging Products & Equipment

Manual Heat Insert Driver targets production environments.

Apr 16, 2009

Capable of installing virtually any type of Heat/Ultrasonic style insert into plastic assemblies, Model HM eliminates dependency on operator to control time, temperature, and pressure to ensure optimal flow of plastic. Driver features 10 x 12 in. base platform, 7.5 in. throat clearance, 3.5 in. stroke, and ±.005 in. position accuracy. Ceramic coated shaft and Freelon(TM) bearings enable smooth... Read More

Machinery & Machining Tools

Manual Pin Inserter targets production environments.

Dec 05, 2008

Suited for installations requiring low insertion forces, Model PM features 10 x 12 in. base platform, throat clearance up to 7.5 in., and stroke up to 3.5 in. Ceramic-coated shaft and Freelon(TM) bearings provide smooth operation, while micrometer-style positive stop enables accurate setting of stroke stop position. Additional features include pre-drilled and tapped holes for fixture tooling... Read More

Fasteners & Hardware

Compression Limiters absorb load in plastic assemblies.

Feb 25, 2008

Series CL500 roll-formed, insert-moldable Compression Limiters is designed around standard clearances for 6 and 8 mm bolts, while series CL550 is designed with additional clearance around bolts to accommodate greater positional tolerances. Standard material is low carbon steel with trivalent, hexavalent-free zinc plate finish for corrosion protection. They are used to preserve threaded joint's... Read More

Fasteners & Hardware

SS Spring Pin suits highly corrosive environments.

Jul 19, 2004

Type 316 Stainless Steel Coiled Pin handles marine and petrochemical applications, resists pitting and crevice corrosion, and maintains mechanical integrity at high and sub-zero temperatures. It can be installed using hammer, arbor press, or any other standard pin insertion equipment. Pin has uniform strength and flexibility after insertion. Read More

Fasteners & Hardware

Helical Grooved Pins suit high-shear applications.

Apr 02, 2004

Helical grooved solid pins utilize unique groove configuration that makes them suitable for installation in harder host materials. Wide, low-profiled peaks spiral about body of pin, allowing pin to maintain integrity when installed into hardened hole. Available in Full Length Groove, Half Length Centered Groove, and Half Length Offset Groove configurations, pins are made of carbon steel and 300... Read More

Fasteners & Hardware

Spring Pin eliminates orientation requirements.

Jun 11, 2003

Double Reduced End Spring Coiled Pin is symmetrical, with reduced diameters at each end to eliminate need for orientation in assembly process. Pins are available in high carbon steel SAE 1070-1095/CS-70, chrome stainless steel SAE 51420, nickel stainless steel SAE 30302/30304, and alloy steel SAE 6150H with special materials available upon request. Components can be installed with hammer, arbor... Read More

Machinery & Machining Tools

Heat Insert Drivers range from manual to fully automatic.

Apr 08, 2003

Model HA automatic insert driver is completely self-contained. Insert is oriented in vibratory feeder and fed to heated shuttle mechanism that positions insert directly underneath insertion quill. Semi-Automatic Insert Driver, Model HP, requires insert to be manually loaded into part. Pneumatic powered action of machine with adjustable timer completes installation. Manual driver, Model HM,... Read More

Fasteners & Hardware

Dowel Bushings suit large bolting applications.

Mar 12, 2003

Dowel Bushings align mating components and provide ID clearance hole for bolt, eliminating need for separate dowel hole. Spring Dowels align mating components when bolt must be located in separate location. Both products protect bolts from shear loading that will cause premature failure of bolt. Sizes are available for use with 5/8 in., 3/4 in., 14 mm, and 16 mm bolt sizes. They are made of... Read More

Fasteners & Hardware

Inserts press into plastic without melting.

May 16, 2002

Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing... Read More

Fasteners & Hardware

Brass Inserts have hexagonal heads.

Mar 20, 2002

Series 40 through-hole and Series 44 blind-end hexagonal, molded-in, brass inserts are suitable for placement in plastic molds prior to plastic injection. They do not require specialized insertion tools, and are manufactured to simplify orientation and placement onto mold core pins. Hexagonal head provides bi-directional torque resistance and large undercut provides high-tensile strength. Read More

Fasteners & Hardware

Reverse Expansion Insert presses into plastic hole.

Feb 27, 2002

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by... Read More

Other Company News from
SPIROL International Corporation