Miller Electric Manufacturing, an ITW company
Appleton, WI 54912
Share:
Maxstar 200 LX DC-TIG/Stick Inverter-Based Power Supply
The Maxstar-® 200 LX accepts input power ranging from 115 to 460V, single- or three-phase, and 50 or 60 Hz without any manual relinking. It comes with Auto-LineÃâ primary power management technology and has a 1 to 200 amp output. This power supply has controls for true pulsing, sequence controls, and trigger functions. Other features include a high-frequency Lift-Arc™ TIG starter, pre-...
Read More »
Maxstar 200 DX DC-TIG/Stick Inverter-Based Power Supply
The Maxstar-® 200 DX accepts input power ranging from 115 to 460V, single- or three-phase, and 50 or 60 Hz without any manual relinking. It comes with Auto-LineÃâ primary power management technology and has a 1 to 200 amp output. This power supply has controls for true pulsing, sequence controls, and trigger functions such as trigger hold, spot timer and 4T. Other features include a...
Read More »
Maxstar 200 LX DC-TIG/Stick Inverter-Based Power Supply
The MaxstarÃ-® 200 LX accepts input power ranging from 115 to 460V, single- or three-phase, and 50 or 60 Hz without any manual relinking. It comes with Auto-LineÃÆ'ââ¬Â primary power management technology and has a 1 to 200 amp output. This power supply has controls for true pulsing, sequence controls, and trigger functions. Other features include a high-frequency Lift-Arc™...
Read More »
Maxstar 200 DX DC-TIG/Stick Inverter-Based Power Supply
The MaxstarÃ-® 200 DX accepts input power ranging from 115 to 460V, single- or three-phase, and 50 or 60 Hz without any manual relinking. It comes with Auto-LineÃÆ'ââ¬Â primary power management technology and has a 1 to 200 amp output. This power supply has controls for true pulsing, sequence controls, and trigger functions such as trigger hold, spot timer and 4T. Other features...
Read More »
MIG Welding Systems come with power, feeder and gun.
MIGRunner packages include power source, matching wire feeder and gun, running gear and accessories. Models include: CP-302 package with 22 A semi-automatic wire feeder and 300 A C-Series industrial gun; XMT 304 CC/CV Package with 5 to 400 A output inverter for MIG, flux cored, stick and TIG welding, air carbon arc cutting and gouging; and Invision 354MP Package for pulsed MIG welding with steel,...
Read More »
MIG Welding Systems come with power, feeder and gun.
MIGRunner packages include power source, matching wire feeder and gun, running gear and accessories. Models include: CP-302 package with 22 A semi-automatic wire feeder and 300 A C-Series industrial gun; XMT 304 CC/CV Package with 5 to 400 A output inverter for MIG, flux cored, stick and TIG welding, air carbon arc cutting and gouging; and Invision 354MP Package for pulsed MIG welding with steel,...
Read More »
MIG Systems come in complete packages.
MILLER UNVEILS NEW MIG SYSTEMS, ENGINE DRIVES AT FABTECH INTERNATIONAL 2001 APPLETON, Wis., Oct. 2001 - Miller Electric Mfg. Co. will demonstrate its new MIGRunner industrial-MIG welding packages, new line of Millermatic all-in-one MIG welding systems, and Trailblazer' DC and Trailblazer 301 G engine-driven welding generators at FABTECH International 2001. A leading worldwide manufacturer of...
Read More »
MIG Systems come in complete packages.
MILLER UNVEILS NEW MIG SYSTEMS, ENGINE DRIVES AT FABTECH INTERNATIONAL 2001 APPLETON, Wis., Oct. 2001 - Miller Electric Mfg. Co. will demonstrate its new MIGRunner industrial-MIG welding packages, new line of Millermatic all-in-one MIG welding systems, and Trailblazer' DC and Trailblazer 301 G engine-driven welding generators at FABTECH International 2001. A leading worldwide manufacturer of...
Read More »
Wire Feeder operates at speeds from 50 to 780 ipm.
Model 714S bench style wire feeder features one tool-less, rotatable drive assembly and automatic run-in. Dual tension control provides independent drive roll pressure on front and back rolls, while trigger hold allows extended welds. 714S runs hard and cored wires from 0.023 to 1/8 in. dia at speeds from 50 to 780 ipm. Spool size capacity is 60 lb, and incorporates Posifeed(TM) four-drive-roll...
Read More »
Wire Feeder operates at speeds from 50 to 780 ipm.
Model 714S bench style wire feeder features one tool-less, rotatable drive assembly and automatic run-in. Dual tension control provides independent drive roll pressure on front and back rolls, while trigger hold allows extended welds. 714S runs hard and cored wires from 0.023 to 1/8 in. dia at speeds from 50 to 780 ipm. Spool size capacity is 60 lb, and incorporates Posifeed(TM) four-drive-roll...
Read More »