New Laboratory Paddle Blender Model 42P-1SS Features a Pneumatic Powder Charging Port and Liquid Delivery Spray System
Material Processing

New Laboratory Paddle Blender Model 42P-1SS Features a Pneumatic Powder Charging Port and Liquid Delivery Spray System

ROSS’s laboratory paddle blender is made from US stainless steel type 304 with a 150-grit interior finish and driven by a 1hp TEFC motor. Touchscreen PLC recipe controls are provided inside a NEMA 4X stainless steel enclosure for indoor or outdoor applications. An interchangeable ribbon agitator is supplied with the blender to easily accommodate minor liquid additions. The paddle and ribbon...

Read More »
VMC-500 VersaMix Mixer features purged explosion-proof operator station.
Electronic Components & Devices

VMC-500 VersaMix Mixer features purged explosion-proof operator station.

VMC-500 VersaMix Multi-Shaft Mixers are suitable for processing medium to high-viscosity applications such as slurries, paste, gels and suspensions. Unit features PLC recipe controls and air casters for movement. Mixer is equipped with anchor agitator and screw auger agitator that work in tandem for increasing product turnover. Unit’s saw-tooth high speed disperser blades are used for imparting...

Read More »
Ross Tumble Blenders feature 50-psig heating/cooling jacket.
Material Processing

Ross Tumble Blenders feature 50-psig heating/cooling jacket.

Ross Tumble Blenders are equipped with explosion-proof brake motor and NEMA 4 control panel. Units are suitable for blenders for batches which require the dispersion of extremely small minor components and low shear intensity. Products feature V-cone vessel which is designed for internal pressure up to 5 psi and are rated for bulk densities up to 125 lb/ft3. Blenders come with Type 4 finger...

Read More »
Multi-Agitator System for Crucial Mixing and Dispersion Requirements
Electronic Components & Devices

Multi-Agitator System for Crucial Mixing and Dispersion Requirements

Hauppauge, NY, August 21, 2017 – The Ross VersaMix is a multi-shaft mixer designed for viscous applications requiring a high level of accuracy and batch-to-batch consistency. In a VersaMix, two or three independently-driven agitators work in tandem to ensure high-speed fine dispersion, efficient turnover and uniform heating/cooling. Shown is a Ross VersaMix Model VMC-200 with a maximum working...

Read More »
Heavy-Duty and High-Capacity Multi-Agitator Mixing Systems
Electronic Components & Devices

Heavy-Duty and High-Capacity Multi-Agitator Mixing Systems

Hauppauge, NY, June 19, 2017 – Ross VersaMix Multi-Shaft Mixers designed for robust large-scale production enable reliable and repeatable batch processing of high-volume viscous applications such as solid-liquid dispersions, thickened emulsions, suspensions, pastes and gels. As a multi-agitator system, the VersaMix is easily adaptable for mixing at low, intermediate and high shear levels, or...

Read More »
Ribbon Blenders for Specialty Applications
Material Processing

Ribbon Blenders for Specialty Applications

Hauppauge, NY, May 23, 2017 - Allowing a full range of customizations, Ross Ribbon Blenders offer practical solutions for specialty and demanding applications. These blenders are widely used for mixing powders, granules and other dry solids, as well as wet applications including suspensions, slurries and pastes. Provisions for vacuum and internal pressure, temperature control, sanitary...

Read More »
Planetary Dispersers with PLC Recipe Controls
Fluid & Gas Flow Equipment

Planetary Dispersers with PLC Recipe Controls

Hauppauge, NY, April 18, 2017 – Ross PowerMix Planetary Dispersers with PLC Recipe Controls deliver superior batch-to-batch consistency in the mixing of high-solids, high-viscosity applications. Two independently-driven agitators – a high speed sawtooth disperser and a low speed planetary stirrer – make the PowerMix ideal for dispersing powders and applying high shear to viscous materials...

Read More »
ASME Tank Fabrication
Material Handling & Storage

ASME Tank Fabrication

Savannah, GA, March 20, 2017 – Ross Engineering’s ASME tanks are custom built to serve a wide range of applications and processing requirements in virtually any industry. The pictured 5,000-gal stainless steel tank is designed for full vacuum up to 10 psig internal pressure at 200oF in accordance with ASME Code Section VIII, Division 1 latest edition. It includes various size flange...

Read More »
Ross SysCon Custom-built Control Systems
Agricultural & Farming Products

Ross SysCon Custom-built Control Systems

Savannah, GA, December 27, 2016 – Every Ross SysCon Control System is designed and engineered to guarantee ultimate efficacy no matter the application. Shown is a NEMA 12 Control Panel which operates a Ross V-Cone Tumble Blender. Two Variable Frequency Drives (VFD’s) are internally mounted for controlling the tumbling vessel and intensifier bar. Main disconnect with lockout provision, color...

Read More »
Model 42N-120SS Ribbon Blenders includes spherical disc valve.
Material Processing

Model 42N-120SS Ribbon Blenders includes spherical disc valve.

Used for rapid blending of dry powders, granules and pellets, Model 42N-120SS Ribbon Blenders features 120-cu.ft stainless steel construction. Including solid agitator shaft with precision formed ribbons having angled leading edges, device prevents material build-up. With scrapers welded to the spokes and ribbons, updated unit have tolerance 1/8 in. to the end wall. 42N-120SS comes with...

Read More »

All Topics