Share:
High Shear Mixer targets process industries.
Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit...
Read More »Planetary Mixer handles high-viscoity paste materials.
Featuring 316 stainless steel construction and polished to 150 grit finish, Single Planetary Mixer is available in wide range of sizes from 1-300 gallon capacity. Unit is equipped with custom helical mixing blade as well as air/oil hydraulic lift to raise and lower agitator from mix vessel. Providing dust tight operation with numerous charge and sight ports, mixer includes NEMA 4 control panel...
Read More »
Single Planetary Mixer handles high-viscosity materials.
Featuring stainless steel type 316 construction polished to 150 grit finish, single planetary mixer is equipped with custom helical mixing blade that allows mixing of high-viscosity paste materials. Unit incorporates multiple charge and sight ports and is built for dust-tight operation. In addition to NEMA 4 control panel purged for Cl1 Div 1 hazardous areas, features include air/oil hydraulic...
Read More »
Paddle Blender mixes and deaerates viscous paste.
Designed for operation under vacuum to 29.5 in. hg, horizontal Vacuum Paddle Blender features 100 cu-ft working capacity and 110 cu-ft full holding capacity. All wetted parts are 304 SS and polished to 120-grit finish to assist in cleaning between mixes and color changes. Unit includes pneumatically operated, flush-type plug valve that eliminates dead spaces within mix zone.
Read More »
High Shear Mixer features inline design.
Suited for use in laboratory and pilot plant development efforts, Model 400DL consists of 1-3/8 in. dia rotor which is driven by 1 hp motor at speeds up to 10,000 rpm. Mixer is offered with attached 2.5 gal mix vessel and range of stator heads including slotted, round hole, fine screen, and Quad (4-stage) designs. All wetted surfaces are constructed in 316 stainless steel and special seals are...
Read More »
Solids-Liquid Injection Manifold is CIP/SIP capable.
With SS surface and mirror finish on interior wetted components, SLIM (solids-liquid injection manifold) system uses vacuum force at intake area to suck in powders or liquids for immediate emulsification/dispersion. Mounted on casters, system includes 1Ã-¾ gal funnel for powder charging, along with sanitary connections, double mechanical seal, and seal barrier system. Applications include...
Read More »Ross Stocks Dual Shaft Mixers
Charles Ross and Son Company today announced the in-stock availability of its Dual Shaft Change Can Mixers. The CDA Model Dual Shaft Mixers are offered from stock with an Anchor and a High Speed Disperser. Each agitator is independently driven by an inverter duty, explosion proof motor to enable its use for variable speed operation. This line of economical mixers is stocked in 2, 10, 50 and 100 -...
Read More »
Cylindrical Vacuum Dryers suit chemical process industries.
Providing full vacuum and internal pressure operation, Cylindrical Vacuum Dryers range from 1 to over 500 cu-ft, and can be constructed from variety of materials such as hastelloy and stainless steel. Units feature dimpled and baffled jackets on trough sides and endplates rated to 200 psig. Internal agitation consists of paddle design, set at opposing angles, to insure material being dried is...
Read More »
Dispersers mix high viscosity, non-flowing materials.
Available with bow tie or 4-blade turbine, High Viscosity Disperser comes in variety of models to handle volumes up to 500 gal. Units feature Type 304 stainless steel wetted parts, hydraulic lifts, stainless steel shafts, explosion-proof safety switches, and explosion-proof, VFD capable motors. Dispersers are suited for mixing and blending pigmented pastes, inks, epoxies, polyesters, and...
Read More »
Mixer enables mixing of ultra-high viscosity formulations.
Double planetary mixer, model DPM, incorporates TeflonÃ-® coated HV blade that is capable of mixing products up to 8,000,000 cps and assists in rapid incorporation of light and difficult to wet solids such as fumed silica. Blade design cleans walls and bottom of vessel and eliminates climbing of viscous materials during mix cycle. Mixer is available in sizes from Ã-½ pint through 750 gal...
Read More »