Emuge Corp.

Precision Ground Taps feature productivity enhancing flute.
Electrical Equipment & Systems

Precision Ground Taps feature productivity enhancing flute.

NPT Taper Pipe Taps have flute with variable skip tooth geometry that optimizes chip flow and clearance while also lowering tapping torque. Design accommodates materials that produce long, stringy chip formations. Constructed of premium high speed steel and PVD coated for extended life, tools come in pipe sizes 1/16-1 in. NPT and in 2 overall lengths: standard ANSI length, and longer DIN length...

Read More »
Cobalt Steel Taps feature chip-breaking technology.
Electrical Equipment & Systems

Cobalt Steel Taps feature chip-breaking technology.

Ground with eccentrically relieved threads that feature full pitch diameter relief, Rekord DZ Series eliminates formation of continuous chips that occur when tapping carbon steels, alloy steels, and austenitic stainless steels. Cutting face geometry and spiral flute form combine to affect chip flow, chip curl, and chip length. Ground with 2BX increased pitch diameter, taps also feature TIN...

Read More »
JIS Taps produce threads with JIS Class 2 tolerance.
Electrical Equipment & Systems

JIS Taps produce threads with JIS Class 2 tolerance.

Suited for through- or blind-hole applications, Emuge JIS Taps produce threads in steels, stainless steels, cast and non-ferrous, titanium and titanium alloys, nickel and nickel-base, and cobalt-base alloys. Taps are coated with titanium carbonitride or titanium nitride to extend tool life. Available in sizes from M 5 x 0.8 to M 12 x 1.75 in metric coarse and M 10 x 1.25 to M 20 x 1.5 in metric...

Read More »
End Mill Cutters support diverse materials and applications.
Laboratory and Research Supplies and Equipment

End Mill Cutters support diverse materials and applications.

Ranging from 1-20 mm dia depending on design, High Productivity Cutting (HPC) End Mills are made from micro-grain carbide and address applications such as complex 3D machining, roughing, and pre-finishing operations. Combination of cutting tool technologies, such as variable pitch and flute spacing, minimize vibrations even at elevated speeds and substantial cutting depths. Reliability and chip...

Read More »
End Mills optimize machining of challenging materials.
Laboratory and Research Supplies and Equipment

End Mills optimize machining of challenging materials.

Made from carbide for wear resistance, TiNox-Cut End Mills offer cutting solution for nickel alloys like Inconel and Stellite, all grades of titanium, and tough stainless steels. Heat-resistant lubricious coating and cutting edge design maximize tool life by minimizing friction and evacuating chips. Available in 6-20 mm diameters, end mills come in two 4-flute variations for roughing and...

Read More »
Carbide End Mills minimize tough material machining effort.
Laboratory and Research Supplies and Equipment

Carbide End Mills minimize tough material machining effort.

TiNox-Cut series promotes tool life when machining challenging materials, namely nickel alloys such as Inconel and Stellite, all grades of titanium, and stainless steels such as Super Duplex. Accommodating production demand for parts machined from said materials, end mills have heat-resistant, lubricious coating as well as optimized cutting edge design that extends tool life by minimizing...

Read More »
General-Purpose Tap works with wide material range.
Electrical Equipment & Systems

General-Purpose Tap works with wide material range.

Intended for short and medium run applications, MultiTAP cuts range of materials - carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass, bronze - and produces threads within 2B and 3B classes of fit. Construction is of proprietary grade of high speed steel (HSS-E), Nitrided with Ne2 surface treatment, and products are available in spiral point as well as spiral flute...

Read More »
End Mills are designed for dental machining applications.
Laboratory and Research Supplies and Equipment

End Mills are designed for dental machining applications.

Solid carbide ball nose end mills, suited for roughing/finishing, are available in cutting diameters from 0.4-6 mm. Suitable for roughing in cobalt chrome, torus end mills have cutting diameters of 3 and 4 mm and come with 2 or 4 flutes. Featuring carbide construction, both tool types have radius tolerance of up to ±.005 mm and diameter tolerance of .01 mm. They can include TiAlN, CrN, or...

Read More »
Emuge Introduces Comprehensive Line of Cutting Tools for Wind Turbines
Agricultural & Farming Products

Emuge Introduces Comprehensive Line of Cutting Tools for Wind Turbines

WEST BOYLSTON, MA U.S.A. (April 27, 2009) - Today Emuge Corp. introduced an extensive line up of tools optimized specifically for the production of wind turbine components. Continuous technology advancements in components and materials demand high quality tooling for the most efficient and cost-effective machining of parts used in today's wind turbines. Emuge's new Wind Power program offers a...

Read More »
End Mills machine various components without tool change.
Laboratory and Research Supplies and Equipment

End Mills machine various components without tool change.

Application-specific Conical Ball Nose End Mills enable impellers, blisks, turbine blades, and tire profiles to be machined without tool changes during 3- and 5-axis operations. Available in range of sizes, tools include uncoated designs able to mill aluminum and steels such as nickel-chrome and Inconel. TiALN-coated tools can machine steel materials up to Rc 45 in addition to cast/nonferrous...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers