Esco Tool
New England Industrial Park
Holliston, MA 01746
New Esco MILLHOG Rolling Motors and Tube Expanders Featuring Torque Control Setting
Available with wide selection of adapters and universal pivoting extensions that let users reach around obstructions and roll hard to access boiler tubes. Provides precise torque control from 25 to 325 ft.-lbs. Ideal for rolling tubes from 0.625” to 4.5” O.D.
Read More »
ESCO Launches APS-438LRC Pneumatic Saws for Cutting Pipe in Tight Quarters
Suits for pipes ranging from 6” to 60” dia. for cutting concrete lined pipe. Offers square cuts range up to ±1/16” and leaves no heat-affected-zone. Available with mounting trolley, and circumferential track system.
Read More »
New Dictator II MILLHOG Pipe Beveler Features Operating Range from 4.5" I.D. to 24" O.D
Three wide clamps provide six points of contact on the pipe I.D. resulting in rigid mounting and chatter-free beveling. Includes patented safety spring hanger for easier alignment. EscoLock™ cutter blade holding system and TiN coated cutter blades directs the chip and heat away from the pipe to prevent work hardening.
Read More »
New Esco HOG TIE Boiler Tube Weld Alignment Clamp Comes with Safety Lanyard
The Esco HOG TIE® Boiler Tube Weld Alignment Clamp attaches to a waterwall boiler tube panel. The kit consists of tools that help in achieving accurate horizontal and vertical gap spacing. The clamp features two through-holes and the other has threaded inserts. The kit is available in 7 sizes for 1.75 in. to 3.25 in. O.D. tubes and comes with impact wrench and socket, four 0.5 in. bolts, two...
Read More »
Latest Esco Flange Hog 110 Facer Features Two Interchangeable Cross Feeds
Esco FLANGE HOG 110® Flange Facer is designed for re-facing damaged pipe flanges with a phonographic finish on-site. The unit mounts to the flange I.D. in seconds with a clamping range of 0.9 to 10 in. and 0.005 in. alignment accuracy. It comes with two-sided cutting bits that are formed to cut through high alloyed materials. The facer machine flanges with a reach up to 14 in. O.D. and features...
Read More »
New MILLHOG APS-438 Air Powered Saw Comes with Fiberglass Reinforced Blade
Esco’s MILLHOG® APS-438 Air Powered Saw is designed for cutting concrete lined steam pipe mounts on to a WrapTrack® system. The portable saw mounts on a trolley equipped with four V-grooved steel wheels. The unit produces square cuts at an accuracy of ±1/16 in. and the WrapTrack system can be sized for 6 to 60 in. dia pipe. MILLHOG APS-438 saw is suitable for making field repairs to...
Read More »
New MILLHOG Pipe Beveling Tools Come with Rigid Mounting with Clamping Surfaces
MILLHOG® Pipe Beveling Tools are available in Tube Weasel MILLHOG® and C-Hog MILLHOG® models with pneumatic, electric, or battery power. Units are designed for tubes and pipes from 0.5 in. I.D. to 3 in. O.D with different bores and wall thicknesses. MILLHOG tools are equipped with TiN coated blades and cutter blades with radical chip breakers. Tube Weasel clamping tool is used for applications...
Read More »
MILLHOG® Tube Replacement System Now Uses TiN Coated Blades
MILLHOG® Water Wall Boiler Tube Replacement System incorporates APS-438 Air-Powered Saw, Wart MILLHOG® Beveler and Track System to track the tube panels. The system can be mounted on to tubes with self-centering I.D. clamp system and the beveller delivers 30° to 37-1/2° end preps. Suitable for tubes from 1 to 4 in. O.D, the system eliminates the need for torches, HAZ and grinders.
Read More »
MILLHOG® Cutter Blades come with radical chip breaker.
Esco MILLHOG® Cutter Blades are available in 37-1/2° and 30° standard O.D. angles and are made from T-15 tool steel with TiN or hard lube coating. These blades are used for beveling pipe O.D., flat face, and bore the I.D. simultaneously. Units are suitable for heavy-wall pipes made of Super Duplex stainless steel or P-91 alloys and come with EscoLock™ wedge-style rigid blade lock system.
Read More »
Pipe Beveling Machine Creates J-Preparation for Orbital Welding
A heavy-duty I.D. clamping pipe milling end prep tool that can J-prep bevel, face, and bore all hard pipe alloys in preparation for orbital welding is available from ESCO Tool of Holliston, Massachusetts. The Esco Prepzilla MILLHOG® I.D. Clamping End Prep Tool is offered with a wide selection of cutting blades including a J-preparation blade that creates a consistent contoured radius and clean...
Read More »
New Esco MILLHOG Rolling Motors and Tube Expanders Featuring Torque Control Setting
Available with wide selection of adapters and universal pivoting extensions that let users reach around obstructions and roll hard to access boiler tubes. Provides precise torque control from 25 to 325 ft.-lbs. Ideal for rolling tubes from 0.625” to 4.5” O.D.
Read More »
ESCO Launches APS-438LRC Pneumatic Saws for Cutting Pipe in Tight Quarters
Suits for pipes ranging from 6” to 60” dia. for cutting concrete lined pipe. Offers square cuts range up to ±1/16” and leaves no heat-affected-zone. Available with mounting trolley, and circumferential track system.
Read More »
New Dictator II MILLHOG Pipe Beveler Features Operating Range from 4.5" I.D. to 24" O.D
Three wide clamps provide six points of contact on the pipe I.D. resulting in rigid mounting and chatter-free beveling. Includes patented safety spring hanger for easier alignment. EscoLock™ cutter blade holding system and TiN coated cutter blades directs the chip and heat away from the pipe to prevent work hardening.
Read More »
New Esco HOG TIE Boiler Tube Weld Alignment Clamp Comes with Safety Lanyard
The Esco HOG TIE® Boiler Tube Weld Alignment Clamp attaches to a waterwall boiler tube panel. The kit consists of tools that help in achieving accurate horizontal and vertical gap spacing. The clamp features two through-holes and the other has threaded inserts. The kit is available in 7 sizes for 1.75 in. to 3.25 in. O.D. tubes and comes with impact wrench and socket, four 0.5 in. bolts, two...
Read More »
Latest Esco Flange Hog 110 Facer Features Two Interchangeable Cross Feeds
Esco FLANGE HOG 110® Flange Facer is designed for re-facing damaged pipe flanges with a phonographic finish on-site. The unit mounts to the flange I.D. in seconds with a clamping range of 0.9 to 10 in. and 0.005 in. alignment accuracy. It comes with two-sided cutting bits that are formed to cut through high alloyed materials. The facer machine flanges with a reach up to 14 in. O.D. and features...
Read More »
New MILLHOG APS-438 Air Powered Saw Comes with Fiberglass Reinforced Blade
Esco’s MILLHOG® APS-438 Air Powered Saw is designed for cutting concrete lined steam pipe mounts on to a WrapTrack® system. The portable saw mounts on a trolley equipped with four V-grooved steel wheels. The unit produces square cuts at an accuracy of ±1/16 in. and the WrapTrack system can be sized for 6 to 60 in. dia pipe. MILLHOG APS-438 saw is suitable for making field repairs to...
Read More »
New MILLHOG Pipe Beveling Tools Come with Rigid Mounting with Clamping Surfaces
MILLHOG® Pipe Beveling Tools are available in Tube Weasel MILLHOG® and C-Hog MILLHOG® models with pneumatic, electric, or battery power. Units are designed for tubes and pipes from 0.5 in. I.D. to 3 in. O.D with different bores and wall thicknesses. MILLHOG tools are equipped with TiN coated blades and cutter blades with radical chip breakers. Tube Weasel clamping tool is used for applications...
Read More »
MILLHOG® Tube Replacement System Now Uses TiN Coated Blades
MILLHOG® Water Wall Boiler Tube Replacement System incorporates APS-438 Air-Powered Saw, Wart MILLHOG® Beveler and Track System to track the tube panels. The system can be mounted on to tubes with self-centering I.D. clamp system and the beveller delivers 30° to 37-1/2° end preps. Suitable for tubes from 1 to 4 in. O.D, the system eliminates the need for torches, HAZ and grinders.
Read More »
MILLHOG® Cutter Blades come with radical chip breaker.
Esco MILLHOG® Cutter Blades are available in 37-1/2° and 30° standard O.D. angles and are made from T-15 tool steel with TiN or hard lube coating. These blades are used for beveling pipe O.D., flat face, and bore the I.D. simultaneously. Units are suitable for heavy-wall pipes made of Super Duplex stainless steel or P-91 alloys and come with EscoLock™ wedge-style rigid blade lock system.
Read More »
Pipe Beveling Machine Creates J-Preparation for Orbital Welding
A heavy-duty I.D. clamping pipe milling end prep tool that can J-prep bevel, face, and bore all hard pipe alloys in preparation for orbital welding is available from ESCO Tool of Holliston, Massachusetts. The Esco Prepzilla MILLHOG® I.D. Clamping End Prep Tool is offered with a wide selection of cutting blades including a J-preparation blade that creates a consistent contoured radius and clean...
Read More »
