Esco Tool
New England Industrial Park
Holliston, MA 01746
End Prep Tool prevents out-of-round bevels.
Portable, air-powered MILLHOGÃ-® Dictator Clamping Tool features centering cage, mounting sleeve for tool, and dial indicator for establishing actual center of pipe up to 24 in. OD. Capable of compound bevels without adjustments, preset template allows ratchet cross-feed mechanism to engage single point cutting blade. Tool uses cutter blades made from TiN coated, high-speed tool steel and...
Read More »Boiler Tube End Prep Tool fits into tight areas.
Esco Mongoose MILLHOGÃ-® right angle drive ID clamping end prep tool utilizes push-pull clamp and release mechanism with attached wrenches to bevel tubes with 5/8 in. ID to 3 in. OD. Its 2/3 hp pneumatic motor generates cutting torque at the bit capable of machining stainless steel and alloyed tubing. Suitable for performing any angle of prep, tool includes dual opposed tapered roller...
Read More »End Prep Tool repairs boiler tubes.
Wart MILLHOGÃ-® Right Angle ID Clamping End Prep Tool features gear drive supported by dual-opposed tapered roller bearings, separate bearing to support cutter head, and EscoLock(TM) wedge-style blade lock system. Requiring only 2 5/8 in. wide clearance to fit between boiler tubes, tool features handle with ratchet for clamping to tube ID and knurled knob to simplify positioning. Tool...
Read More »Tool Bits perform specific welding end prep jobs.
Titanium nitride (TiN) coated Formed Tool Bits, for use with EscoLock(TM) wedge-lock blade locking system, bevel, face, and bore clad boiler tubes simultaneously without cutting oils. Suitable for Millhog end prep tools, bits work on tubes from Ã-½ in. ID to 18 in. OD and cut angles from 10Ã-
Read More »Tube Expander Kits are fitted to user requirements.
MILLHOGÃ-® Rolling Motor and Tube Expander Kits accurately control tube expansion and create tight mechanical seal between tube OD and tube sheet. They include choice of rolling motor types, custom sized tube expanders from 3/8 to 4 Ã-½ in. O.D., hose whip with in-line air filter, oiler, wrenches, and operating instructions. Air-powered motors have torque limits that can be preset from 25...
Read More »Air-Powered Saw converts into chop-off saw.
Model APS-438 uses chain-mount Single Cut Bracket to convert into portable chop-off saw that cuts tube, pipe, or bar stock from 2 to 5 in. OD. Featuring 3 hp motor that runs on 90 psi, saw uses 10 or 12 in. fiberglass-reinforced abrasive blades that leave no HAZ (heat affected zone). Saw produces square cut with Ã-
Read More »Pipe Milling End Prep Tool has oversize ID clamping system.
Air-powered Commander MillhogÃ-® Model C-314 offers dual opposed tapered roller bearings for smooth operation. Oversize clamp ribs fit into pipe ID and have 6 contact points to spread radial load and minimize vibration. Fully portable, it pulls thick chip without cutting oils on pipe from 3.75 in. ID to 14 in. OD Providing 1 mandrel and 7 sets of clamps, model unit has 3 hp air motor that...
Read More »Orifice Unions regulate process flow.
SMA Orifice Unions are available for pipe sizes from Ã-¼ to 2 in. and offer 316L stainless steel orifice plates with drilled holes from 1/64 to 1 in. Various orifice plates are offered for regulation of specific pressure drop and low pressure blanking applications. Suitable for 3,000 and 6,000 psi systems, they provide 45Ã-
Read More »Air Powered Saw cuts round pipe square.
APS-438 3 hp saw and WrapTrack clamps around circumference to cut pipe from 6 to 60 in. dia with Ã-
Read More »Air-Operated Clamp field retrofits onto existing tools.
MILLHOGÃ-® Air Clamp(TM) pneumatic cylinder replaces manual draw rod clamping assembly on Tube Weasel-, Ground-, and Wart MILLHOGÃ-® right angle welding end prep tools to speed up attach/release times. Featuring self-centering draw rod, which inserts into tube or pipe I.D., MILLHOG Air Clamp instantly locks tool into position.
Read More »