Lytron, Inc.
Woburn, MA 01801
Cold Plates are fully compatible with water coolant.
Ascent(TM) Series all-copper cold plates provide contact cooling of high watt-density electronic components such IGBTs, MOSFETs, resistors, and diodes. Normalized thermal resistance at 1 gpm is 0.58Ã-
Read More »Heat Exchangers are pressure tested to 150 psi.
OEM Coil Series Copper Tube-Fin Heat Exchangers range from 20W/Ã-
Read More »Chiller has temperature stability of -
KodiakÃ-® recirculating chiller provides immediate response to setpoint change. Its controller allows pressure units (PSI and BAR) to be set independent of temperature units (Ã-
Read More »Cold Plates suit high-watt density applications.
High Performance Series(TM) cold plates offer corrugated aluminum fins, which provide heat transfer surface. Vacuum brazing produces parts with uniform thermal conductivity over large surface area. Cold plates may be customized to any application and are available in sizes from 4 to 700 inÃ-² (as thin as 0.10 in.). They are manufactured by inserting aluminum fin into aluminum plate with...
Read More »Heat Exchangers come with 90-
Models 4000 and Aspen stainless steel heat exchangers are suitable for deionized water and other corrosive liquids that react with copper. Both models are available with 90Ã-
Read More »Cold Plates fit in small spaces.
Press-Lock II(TM) series uses smaller, tightly packed tubes to improve thermal performance by 40 to 50% over company's previous models. Plates are 0.3 in. thick and tubes are 0.25 in. dia, allowing for tight packaging and stack construction. Tubes are coplanar with plate, allowing parts to be mounted on both sides. Applications include cooling electronics, power supplies, lasers, RF transmitters,...
Read More »Cooling Systems provide up to 2100 W of cooling capacity.
Five 19 in. rack-mountable cooling systems are available with copper, stainless steel, and aluminum heat exchangers. Systems are compatible with variety of cooling fluids, such as water, deionized water, EGW, and oil. Capacities include 500, 1300, 2100 W. Systems are suitable for cooling lasers, semiconductor capital equipment, analytical instruments, and medical equipment.
Read More »Recirculating Chiller has high capacity.
Programmable Kodiak(TM), with cooling capacities from 600 to 6500 W, includes reservoir level indicator and low-flow sensing. Standard versions provide +/- 0.1 deg C temperature stability and use common coolants such as tap water and EGW mixtures. Controller has auto restart, audible fault alarm with mute button, and pressure-indicating button. High-purity plumbing, air and water filters, fault...
Read More »Aluminum Saddle mounts cold plates to electronic boards.
Aluminum Saddle has through or tapped holes for securing company's CP-20 Extended Surface cold plates to electronic boards. It applies consistent force across cold plate, ensuring good thermal connection. All-aluminum cold plates consist of connector tubes welded to micro-channel aluminum extrusion. They can be used with EGW, refrigerant, Fluorinert(R), and other fluids to remove heat from high...
Read More »Lytron Acquires Lydall Industrial Thermal Solutions, Inc ( Affinity )
June 30, 2011, Woburn, MA, USA: Lytron announced today that it has completed the acquisition of Lydall Industrial Thermal Solutions, Inc ( Affinity ) from Lydall, Inc (NYSE). Affinity is a leading designer and manufacturer of high performance industrial chillers and liquid-to-liquid cooling systems for the semiconductor, laser, and industrial markets. Craig Carswell, President and CEO of Lytron...
Read More »Lytron Opens New Factory & Corporate Offices in Woburn, Massachusetts
September 20, 2006, Woburn, MA: Lytron, Inc. recently announced the completion and opening of its new factory and corporate office space in Woburn, Massachusetts. With this new space north of Boston, Lytron has doubled its square footage and increased its manufacturing capabilities, positioning itself for continued growth. It has also made room for equipment and the addition of staff from its...
Read More »Lytron Announces Strategic Acquisition to Expand Custom Cold Plate Capabilities
May 1, 2006, Woburn, MA: Lytron, Inc., a leading supplier of liquid cooling products to OEMs around the world, announced today the acquisition of Lockhart Industries, Inc., a subsidiary of Wakefield Thermal Solutions. Based in Paramount, California, Lockhart designs and manufactures advanced aluminum-brazed cooling components for the military and electronics markets. Lytron plans to move and...
Read More »Cold Plates are fully compatible with water coolant.
Ascent(TM) Series all-copper cold plates provide contact cooling of high watt-density electronic components such IGBTs, MOSFETs, resistors, and diodes. Normalized thermal resistance at 1 gpm is 0.58Ã-
Read More »Heat Exchangers are pressure tested to 150 psi.
OEM Coil Series Copper Tube-Fin Heat Exchangers range from 20W/Ã-
Read More »Chiller has temperature stability of -
KodiakÃ-® recirculating chiller provides immediate response to setpoint change. Its controller allows pressure units (PSI and BAR) to be set independent of temperature units (Ã-
Read More »Cold Plates suit high-watt density applications.
High Performance Series(TM) cold plates offer corrugated aluminum fins, which provide heat transfer surface. Vacuum brazing produces parts with uniform thermal conductivity over large surface area. Cold plates may be customized to any application and are available in sizes from 4 to 700 inÃ-² (as thin as 0.10 in.). They are manufactured by inserting aluminum fin into aluminum plate with...
Read More »Heat Exchangers come with 90-
Models 4000 and Aspen stainless steel heat exchangers are suitable for deionized water and other corrosive liquids that react with copper. Both models are available with 90Ã-
Read More »Cold Plates fit in small spaces.
Press-Lock II(TM) series uses smaller, tightly packed tubes to improve thermal performance by 40 to 50% over company's previous models. Plates are 0.3 in. thick and tubes are 0.25 in. dia, allowing for tight packaging and stack construction. Tubes are coplanar with plate, allowing parts to be mounted on both sides. Applications include cooling electronics, power supplies, lasers, RF transmitters,...
Read More »Cooling Systems provide up to 2100 W of cooling capacity.
Five 19 in. rack-mountable cooling systems are available with copper, stainless steel, and aluminum heat exchangers. Systems are compatible with variety of cooling fluids, such as water, deionized water, EGW, and oil. Capacities include 500, 1300, 2100 W. Systems are suitable for cooling lasers, semiconductor capital equipment, analytical instruments, and medical equipment.
Read More »