OGP - Optical Gaging Products, Inc.
Rochester, NY 14621-4896
Surface Profiling Sensor uses interferometric technology.
Used for surface contour measurement, TeleStar® Probe scans up to 500 data points/sec with 1.0 micron accuracy and 0.1 micron repeatability. This self-contained, off-axis, partial coherence interferometric range sensor, offering measured point resolution in sub-micron (< 0.1 micron) range, has 25 mm constant working distance and is compatible with specular and light-scattering diffuse...
Read More »
Micro Metrology Sensor measures small, fragile features.
Employing resonance as trigger mode, Feather Probe™ supports tips asÂ- small as 100 microns in diameter and trigger forces below 1 mg for measurement of extremely small features as well as fragile or easily deformed features. Dynamic Resonance Mode eliminates effects of such external influences as temperature, air motion, and vibration. Typically protected behind cover when not in...
Read More »
Optical Measurement Sensor provides 32 mm working distance.
With axial resolution of 40 nm, RP1500 Rainbow Probe provides non-contact measurement by analyzing optical spectrum of reflected light to measure surface height changes. Unit canÂ- measure where other sensors cannot, characterizing transparent, translucent, fragile, liquid, or easily deformable surfaces. Deployable under program control, RP1500 is compatible with QVI ZONE3®,...
Read More »
Dimensional Measurement System is multisensor capable.
With 790 x 815 x 250 mm XYZ measurement volume and 300 or 400 mm extended Z axis, SmartScope® Quest 800 accurately measures very large parts or large arrays of smaller fixtured parts. System's 10:1 TeleStar® telecentric zoom lens provides high-level optical performance and accurate video metrology. For stability, optics/sensor head is mounted on stable granite bridge over...
Read More »3D CAD-Based Metrology Software enhances SmartScope systems.
Available for SmartScope® multisensor dimensional measurement systems, QVI® ZONE3 offers full 3D CAD-based programming. Full range of geometric measurement capabilities are complemented by such features such as multisensor automatic path generation, animation-assisted alignment tools, real-time virtual machine kinematics, graphical sensor builder, andÂ- universal construction...
Read More »
OGP Provides 5000th SmartScope Flash to the International Industrial Marketplace
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), marked a proud milestone this week with delivery of the 5,000th SmartScope® Flash(TM) multisensor measuring system. SmartScope Flash systems are the global leaders in high performance dimensional measurement for a wide range of components used in industries ranging from consumer products to...
Read More »
OGP to Showcase SmartScope ZIP® Dimensional Measurement Systems at IMTS 2012
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), will showcase key members of its SmartScope ZIP line of dimensional measurement systems at IMTS 2012. SmartScope ZIP systems offer premium optical performance in a range of measurement volumes. ZIP systems are available in three optical configurations and are multisensor capable, delivering proven,...
Read More »
OGP to Feature High-Accuracy SmartScope® Quest(TM) Dimensional Measurement Systems at IMTS 2012
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), will feature its high-accuracy SmartScope Quest dimensional measurement systems at IMTS 2012. SmartScope Quest systems provide the most precise three-dimensional measurement available from OGP. The patented TeleStar® 10:1 metrology zoom lens is completely telecentric and automatically...
Read More »
See the Full Line of OGP SmartScope® Flash(TM) Measurement Systems at IMTS 2012
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), will show the full range of its popular SmartScope Flash dimensional measurement systems at IMTS 2012. SmartScope Flash systems satisfy the needs of customers seeking accurate, repeatable CNC measurement for industrial quality control. SmartScope Flash systems are available in a variety of XYZ...
Read More »
Dimensional Measurement System offers multisensor capability.
Offering 12 x 12 x 10 in. XYZ travel on benchtop machine, SmartScope Flash(TM) 302 features machined-in axial straightness and perpendicularity, and twin-Z elevating bridge for structural integrity. System includes 12:1 AccuCentric® auto-calibrating motorized zoom lens, LED SmartRing(TM) light, coaxial TTL surface illumination, and tracking LED bar backlight. Through-the-lens laser provides...
Read More »
Surface Profiling Sensor uses interferometric technology.
Used for surface contour measurement, TeleStar® Probe scans up to 500 data points/sec with 1.0 micron accuracy and 0.1 micron repeatability. This self-contained, off-axis, partial coherence interferometric range sensor, offering measured point resolution in sub-micron (< 0.1 micron) range, has 25 mm constant working distance and is compatible with specular and light-scattering diffuse...
Read More »
Micro Metrology Sensor measures small, fragile features.
Employing resonance as trigger mode, Feather Probe™ supports tips asÂ- small as 100 microns in diameter and trigger forces below 1 mg for measurement of extremely small features as well as fragile or easily deformed features. Dynamic Resonance Mode eliminates effects of such external influences as temperature, air motion, and vibration. Typically protected behind cover when not in...
Read More »
Optical Measurement Sensor provides 32 mm working distance.
With axial resolution of 40 nm, RP1500 Rainbow Probe provides non-contact measurement by analyzing optical spectrum of reflected light to measure surface height changes. Unit canÂ- measure where other sensors cannot, characterizing transparent, translucent, fragile, liquid, or easily deformable surfaces. Deployable under program control, RP1500 is compatible with QVI ZONE3®,...
Read More »
Dimensional Measurement System is multisensor capable.
With 790 x 815 x 250 mm XYZ measurement volume and 300 or 400 mm extended Z axis, SmartScope® Quest 800 accurately measures very large parts or large arrays of smaller fixtured parts. System's 10:1 TeleStar® telecentric zoom lens provides high-level optical performance and accurate video metrology. For stability, optics/sensor head is mounted on stable granite bridge over...
Read More »OGP® Unveils Plans for New Customer Center
Rochester, New York –Â- Optical Gaging Products (OGP®), a division of Quality Vision International (QVI®), recently unveiled plans for the expansion of its Customer Center in Rochester, New York. The 4,500 square foot addition will double the size of the existing applications lab and showroom, and create a dedicated metrology training center for OGP customers and...
Read More »3D CAD-Based Metrology Software enhances SmartScope systems.
Available for SmartScope® multisensor dimensional measurement systems, QVI® ZONE3 offers full 3D CAD-based programming. Full range of geometric measurement capabilities are complemented by such features such as multisensor automatic path generation, animation-assisted alignment tools, real-time virtual machine kinematics, graphical sensor builder, andÂ- universal construction...
Read More »
OGP Provides 5000th SmartScope Flash to the International Industrial Marketplace
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), marked a proud milestone this week with delivery of the 5,000th SmartScope® Flash(TM) multisensor measuring system. SmartScope Flash systems are the global leaders in high performance dimensional measurement for a wide range of components used in industries ranging from consumer products to...
Read More »
OGP to Showcase SmartScope ZIP® Dimensional Measurement Systems at IMTS 2012
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), will showcase key members of its SmartScope ZIP line of dimensional measurement systems at IMTS 2012. SmartScope ZIP systems offer premium optical performance in a range of measurement volumes. ZIP systems are available in three optical configurations and are multisensor capable, delivering proven,...
Read More »
OGP to Feature High-Accuracy SmartScope® Quest(TM) Dimensional Measurement Systems at IMTS 2012
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), will feature its high-accuracy SmartScope Quest dimensional measurement systems at IMTS 2012. SmartScope Quest systems provide the most precise three-dimensional measurement available from OGP. The patented TeleStar® 10:1 metrology zoom lens is completely telecentric and automatically...
Read More »
See the Full Line of OGP SmartScope® Flash(TM) Measurement Systems at IMTS 2012
Optical Gaging Products (OGP®), a division of Quality Vision International Inc. (QVI®), will show the full range of its popular SmartScope Flash dimensional measurement systems at IMTS 2012. SmartScope Flash systems satisfy the needs of customers seeking accurate, repeatable CNC measurement for industrial quality control. SmartScope Flash systems are available in a variety of XYZ...
Read More »
