Weidmuller USA, Inc.

Interface Cables connect to industry standard PLCs.
Electrical Equipment & Systems

Interface Cables connect to industry standard PLCs.

Available for most industrial PLCs and Micro PLCs, pre-assembled specific Interface Cable Assemblies feature jacketed round cable that is attached directly to original connectors for specific PLC model I/O card. Several connector styles are available to connect to PLC interface boards, including flat connectors with strain relief and polarized connections, shielded Sub-D connector with shielded...

Read More »
AC DIN Rail Receptacles are fully enclosed and touch safe.
Construction Equipment and Supplies

AC DIN Rail Receptacles are fully enclosed and touch safe.

Available with footprint of 2.9 in. wide and 4.6 in. high, DRAC line can be installed onto 35 mm DIN-rail or, directly panel-mounted. Including 15 or 20 A power outlets, UL508A, cULus, and NEMA approved units accept solid or stranded wiring from 20-10 AWG. Receptacles provide users with convenient power source inside control cabinet for laptops, test equipment, lighting, and solder irons.

Read More »
Isolator is suited for process applications.
Agricultural & Farming Products

Isolator is suited for process applications.

Designed to interface between field equipment and control systems, WAVEPak DC/DC isolator converts and isolates signals with accuracy exceeding 0.1%. User can select either current sink or loop-powered input mode, allowing module to be active or passive input circuit. Integrated test terminals allow testing of input/output current values without removing cables, while LED indicators display...

Read More »
Weidmuller Terminal Blocks Receive New Approvals for Thermal Aging and Seismic Qualification
Architectural & Civil Engineering Products

Weidmuller Terminal Blocks Receive New Approvals for Thermal Aging and Seismic Qualification

MARKHAM, ON (May 20, 2009) - Weidmuller announced today that they have secured Seismic approval for several families of their DIN-rail mounted terminal blocks. These include the W (screw clamp), KDKS (screw clamp fuse terminal), P (Push In connection), Z (tension clamp) and AKZ (TS15 screw clamp) series. This further expands Weidmuller's extensive range of DIN-rail mounted terminal blocks that...

Read More »
PCB Connectors have 3.81 mm pitch.
Construction Equipment and Supplies

PCB Connectors have 3.81 mm pitch.

Suitable for applications including wire-to-board, board-to-wire, wire-to-wire, and board-to-board, 3.81 mm PCB connectors are available in range of poles from 2-16. They are made of high temperature material for reflow soldering applications and come in tape-on-reel packaging for automated pick and place machines. RoHS compliant connectors are also available with optional release levers and are...

Read More »
New Heat Shrink Markers and Compact Thermal Printing Machine Solution
Labels Tags Signage & Equipment

New Heat Shrink Markers and Compact Thermal Printing Machine Solution

RICHMOND, VA (March 31, 2009) -Weidmuller is pleased to announce the release of TwinMark, a new heat shrink marker, and the THM-Plus Thermal printer for shrink markers and labels. TwinMark markers are ideal for use in applications with little room for wire marking, such as inside the housing of a rectangular connector. The 20lb THM-Plus Thermal printer is made specifically for use with the heat...

Read More »
Ethernet Network Terminals are offered in 11 models.
Communication Systems & Equipment

Ethernet Network Terminals are offered in 11 models.

NetBloc terminal units provide network connection and network cable management on 35 mm DIN-rails, simplifying organization, managment, and labeling of network connections. Devices are available in 4 RJ45 versions, 6 fiber optic versions, as well as USB-to-USB version for connecting laptop computers or other USB devices to network. All feature earth grounding option, switched on or off during...

Read More »
Crimp Tools are designed to accommodate industrial use.
Machinery & Machining Tools

Crimp Tools are designed to accommodate industrial use.

Models CTIN CM 1.6/2.5 and CTIN CM 3.6 are designed to crimp 6 types of turned/machined contacts, including HD, HE, HX, M3, M5, and M10. Along with ergonomic design, tools feature built-in stop for exact positioning of contacts as well as digital crimp setting that provides accuracy to within 0.1 mm. While CTIN CM 1.6/2.5 crimps contacts for wire sizes from 26-9 AWG, CTIN CM 3.6 does the same for...

Read More »
PCB Plug Connectors prevent errors during wire insertion.
Construction Equipment and Supplies

PCB Plug Connectors prevent errors during wire insertion.

Equipped with wire guard feature, BLZP Series 5.00 and 5.08 mm connectors prevent user from accidentally inserting wires under clamping mechanism. Units incorporate universal clamping screws that are compatible with standard flat or Philips screwdrivers. Optional release levers ensure wires are not pulled out accidentally while unmating them. Available in 2-24 poles, connectors are RoHS-compliant...

Read More »
Signal Conditioner is IP20-rated.
Agricultural & Farming Products

Signal Conditioner is IP20-rated.

Accepting variety of analog DC input types including temperature, DC, and frequency, Wave TTA functions as signal isolator, transmitter, converter, linearizer, and trip amplifier. Measuring 45 mm wide, cULus certified product has operating temperature range of -40 to 158Â-ºF, allowing for either factory or field enclosure mounting. All output types such as bipolar are settable, while...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers