Company News

Vishay

63 Lancaster Ave., Malvern, PA, 19355, USA

  • 610-644-1300

Latest New Product News from
Vishay

Electronic Components & Devices

Polypropylene Film Capacitor targets DC-link applications.

Mar 30, 2012

Available in 12, 15, 18, and 24 mm profiles, Model MKP1848S features CV range from 2-100 µF and voltage ratings of 500, 700, and 1,000 Vdc. Device provides capacitance down to ±5%, self-inductance of less than 1 nH per mm of lead spacing, and peak current capabilities to 900 A. Offered in flame-retardant plastic case with resin seal, RoHS-compliant, lead-free capacitor operates up to... Read More

Communication Systems & Equipment

SMT IR Receivers target active 3D glasses.

Mar 20, 2012

Dual-lens, 2.3 x 3.0 x 6.8 mm TSOP75D26 and single-lens, 4.0 x 5.3 x 7.5 mm TSOP35D26 are designed to be assembled into active 3D glasses, where they receive IR signals from TV and ensure glasses' LCD shutters open and close in proper synchronization. Both models, which operate on carrier frequency of 26.2 kHz and receive 3D synchronization signals from 830 nm emitter to avoid interference... Read More

Electronic Components & Devices

Tantalum Chip Capacitors offer lo DC leakage current of 0.005 CV.

Mar 19, 2012

Offered in molded package in 5 standard EIA-535BAAC case codes, TANTAMOUNT® TL3 Series features capacitance range of 0.1-470 µF over voltage ratings from 4-63 Vdc with capacitance tolerances of ±10% and ±20%. Designed to extend battery runtime in portable devices, surface-mount capacitors are suited for portable instrumentation, tire-pressure monitoring, medical instruments, local... Read More

Electronic Components & Devices

AC Polypropylene Film Capacitor offers 60,000+ hour life.

Mar 14, 2012

Featuring capacitance range from 1-70 µF and voltage ratings up to 350 V, Model MKP1847 is optimized for AC filtering in UPS systems, power supplies, inverter grid interface, and welding equipment. Device provides capacitance tolerance down to ±5%, low self inductance of less than 1 nH/mm of lead spacing, peak current capabilities up to 750 A, and RMS current up to 32 A. Offered in... Read More

Electronic Components & Devices

Pb-Free/-Bearing Thick Film Chip Resistors are IECQ-CECC approved.

Mar 14, 2012

Offered in 0805 and 1206 case sizes, D..EN802 and CRCW....EN802 devices come in 2 versions: approved to EN 140401-802, Version A, and approved to EN 140401-802, Version E. RoHS-compliant CRCW....EN802 features pure tin termination plating on nickel barrier, while D..EN802 has SnPb termination plating on nickel barrier and min lead content of 10%. Values include TCR of ±200, ±100, and ±50... Read More

Electronic Components & Devices

Precision Resistor Network Devices meet military specs.

Mar 07, 2012

Compliant with EEE-INST-002 and MIL-PRF-83401, PRNDs are hermetically sealed networks consisting of multiple Bulk Metal® Foil hybrid chip resistors connected by gold-wire bonding inside ceramic packages. Devices provide low absolute TCR of ±2 ppm/°C from -55 to +125°C, +25°C ref and load-life stability to ±0.05%. Offered in DIP, flatpack, gull wing, and LCC package... Read More

Electronic Components & Devices

Wide Terminal Thin Film Chip Resistors come in 0406 case size.

Mar 06, 2012

Suited for harsh and high-temperature applications, MCW 0406 AT Series features resistance range of 47 W to 100 kW. Professional versions offer performance up to 175°C for 1,000 hr and power ratings of 300 mW at ambient temperature of 85°C, while Precision Series features TCR down to ±15 ppm/K and tolerances to ±0.1%. On 4-layer... Read More

Electronic Components & Devices

White LEDs utilize nitride phosphor for color stability.

Mar 02, 2012

Available in cool white, neutral white, and warm white, 1 W Little Star® VLMW712xxx Series offers luminous intensity of 33,500, 29,400, and 25,000 mcd, respectively, with thermal resistance of 10 K/W. Devices feature 60° half-intensity angle and 120° viewing angle. Housed in 6.0 x 6.0 x 1.5 mm SMD package, RoHS-compliant LEDs are designed for high current drive up to 350 mA and are... Read More

Electronic Components & Devices, Sensors Monitors & Transducers

Proximity/Ambient Light Sensor includes interrupt function.

Feb 28, 2012

Housed in 3.95 x 3.95 x 0.75 mm surface-mount package with I²C interface, Model VCNL4010 combines IR emitter and photo-pin-diode for proximity, ambient light detector, signal processing IC, and 16-bit ADC. Interrupt function enables sensor to work independently until predefined proximity or ambient light event occurs, and then it wakes up microcontroller, minimizing power consumption. With... Read More

Electronic Components & Devices, Green & Clean, Optics & Photonics

High-Speed PIN Photodiodes come in T1 packages with 3 mm lens.

Feb 24, 2012

For IR and visible light sources, TEFD4300 is clear epoxy device with sensitivity range of 350-1,120 nm. For light sources in IR wavelength from 770-1,070 nm, TEFD4300F is black epoxy device with daylight blocking filter matched with 850-950 nm IR emitters. Both silicon PIN photodiodes offer 17 µA reverse photo current and ±20° angle of half sensitivity. Other features include switching... Read More

Electronic Components & Devices

Shunt Resistor features 3 W power capability.

Feb 20, 2012

Housed in 2906 package, Power Metal Strip® WSMS2906 features proprietary processing technique that produces extremely low resistance values from 300-600 µW, optimizing accuracy in current meter shunt applications. Inductance values are less than 5 nH and thermal EMF is less than 3 µV/°C. With 5.0% tolerance, RoHS-compliant resistor provides power companies... Read More

Electronic Components & Devices

Compact P-Channel 30 V Chipscale MOSFETs offer low on-resistance.

Feb 14, 2012

MICRO FOOT® TrenchFET® Gen III power MOSFETs feature one billion transistor cells in each square inch of silicon and are intended for load, battery, and charger switching in handheld devices. While 1 x 1.5 x 0.59 mm Si8497DB offers low on-resistance of 53, 71, and 120 mW at 4.5, 2.5, and at 2.0 V, respectively, 1.6 x 1.6 x 0.6 mm Si8487DB offers on-resistance of... Read More

Electronic Components & Devices

Thin Film Resistors meet MIL-PRF-83401 requirements.

Feb 10, 2012

Offered in 6-, 8-, and 10-pin configurations, Series M83401 provides TCR of ±25 ppm/°C and tight ratio tolerances to ±0.05%. Through-hole, single-in-line devices utilize SPM passivated Tamelox film for less than -30 dB noise, voltage coefficient of less than 0.1 ppm/V, and power ratings from 0.06-0.120 mW/element. Featuring molded thermoset plastic construction with gold-plated copper... Read More

Electronic Components & Devices

Metal Shunt Resistor features 3 W power and low resistance values.

Feb 08, 2012

Combining resistance values from 100-750 µW with 3 W power capability in 3124 size package, Power Metal Strip® WSMS3124 is designed for industrial and consumer single- or multiphase energy meters. It features 5-terminal connection design, all-welded construction, and offers very low inductance values of less than 0.5 nH and low thermal EMF of less than 3... Read More

Electronic Components & Devices

Ultra-Bright LEDs come in 1.6 x 0.8 x 0.55 mm SMT package.

Jan 27, 2012

Supplied in SMD 0603 package, VLMx1300 series uses ChipLED technology and serves small-scale, high-brightness products that must work reliably in demanding environments. All versions, 6 colors and white, offer 130° viewing angle and use either AllnGaP or InGaN technologies. Luminous intensity is as high as 450 mcd at forward current of 20 mA and max forward voltage of 3.8 V. Blue version is... Read More

Sensors Monitors & Transducers

Linear Position Sensor covers electrical strokes to 10 mm.

Jan 24, 2012

Featuring non-contact Hall effect technology, Model 20 LHE is available with spring return system and is suited for applications in harsh environments. Unit features linearity down to ±1 and performs up to 10 million cycles. With analog ratiometric or digital PWM output, sensor provides continuous performance with no drift of linearity. Operating with supply voltage of 5 V ±10% and supply... Read More

Electronic Components & Devices

Power Resistor (3 W) offers resistance down to 0.0005 ohm.

Jan 20, 2012

Supplied in 2512 case size, WSLP2512 SMT Power Metal Strip® resistor combines power capacity of 3 W with resistance values down to 0.0005 ohm. All-welded construction incorporates solid metal nickel-chrome or manganese-copper alloy resistive element with TCR of less than 20 PPM/°C. Able to be used over -65 to +170°C range without negative effects on power rating or electrical... Read More

Electronic Components & Devices

Schottky Rectifiers offer PV solar cell bypass protection.

Jan 10, 2012

Offering wide range of current ratings from 10-40 A, TMBS® Trench MOS Barrier Schottky Rectifiers feature low forward voltage drops down to 0.51 V typical at 20 A. All 45 V units feature 200°C max junction temperature in DC forward current without reverse bias. Compliant to RoHS Directive 2002/95/EC and WEEE 2002/96/EC, each device is available in power TO-220AC, ITO-220AC, and TO-263AB... Read More

Optics & Photonics

Low-Input Current Optocouplers feature phototransistor output.

Dec 20, 2011

Available in DIP-4 package with 5,000 Vrms isolation voltage, Models VO617A and VO618A achieve CTR of 40-320% at input drive current of 5 mA and 1 mA, respectively. Models VOL617A and VOL618A, offered in 2 mm SOP-4L package, feature 8 mm creepage distance, isolation voltage of 5,000 Vrms, and CTR of 40-320% at input current of 5 mA and 1 mA, respectively. Offered in SSOP-4 package, Models VOS618A... Read More

Electronic Components & Devices

Surface Mount MLCCs feature minimum capacitance of 470 pF.

Dec 16, 2011

Available in 5 case sizes, VJ HVArc Guard® X7R MLCCs feature voltage range of 250-1,000 V with minimum capacitance values of 470 pF in 0805 case size and 220 pF in 1206, 1210, 1808, and 1812 case sizes. Multilayer ceramic chip capacitors have internal design structure that prevents surface arc-over at high voltages. Available with optional polymer terminations that resist board flex cracking,... Read More