Company News

Vishay

63 Lancaster Ave., Malvern, PA, 19355, USA

  • 610-644-1300

Latest New Product News from
Vishay

Electronic Components & Devices

Standard Rectifiers in Thin SMPD serve automotive applications.

Feb 06, 2015

Supplied in SMPD (TO-263AC) package with 1.7 mm profile, SE10DxHM3/1, SE12DxHM3/1, and SE20DxHM3/1 are AEC-Q101-qualified, 100–600 V standard rectifiers that combine ESD capability with current ratings from 10–20 A. These products reduce power loss and improve efficiency for general-purpose power line polarity protection in automotive applications. With ESD capability, devices can provide... Read More

Electronic Components & Devices

Thin Film Resistors feature T level failure rate.

Feb 05, 2015

Suited for critical space applications, E/H Series is qualified to TCR characteristics E, H, K, L, and M in 12 case sizes. Surface-mount resistor chips feature electroplated nickel barrier layer for operating conditions to +150°C, TAMELOX resistive element, and high-purity alumina substrate for power ratings to 1,000 mW. MIL-PRF-55342-qualified devices offer absolute TCR down to ±25... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Quad SPST Analog Switches support wearable applications.

Jan 29, 2015

Housed in 1.4 x 1.4 mm WCSP package with 0.35 mm pitch and top-side lamination, 200 Ω Models DG2501, DG2502, and DG2503 save space in wearable electronics and sensors as well as consumer and communication devices. Monolithic switches provide low CD(OFF) of 2.6 pF, CD (ON) of 7.6 pF, charge injection down to -0.7 pC, and typical switch-on leakage current of 9 pA. Operating from single 1.8–5.5 V... Read More

Electronic Components & Devices

Neutral Ground Resistors protect industrial power systems.

Jan 29, 2015

Comprising GRE1 grid resistors in weatherproof, IP23-rated enclosures with high voltage insulation, Milwaukee Resistors NGR series combines line-neutral (1.39–8 kV) and system (2.4–13.8 kV) voltages with performance to +760°C. Drop-in replacement solutions provide ground fault, overvoltage, and short circuit protection for generators and transformers in wye (star) configurations. Current... Read More

Electrical Equipment & Systems, Electronic Components & Devices

High-Voltage MOSFETs suit SMPS applications.

Jan 23, 2015

Built on second-generation Super Junction Technology, 500 V Series of High-Voltage MOSFETs are optimized for operation in switch mode power supplies to 500 W. Devices range from 12–20 A with low on-resistance from 190–380 mΩ and ultra-low gate charge of 22–45 nC. Designed to withstand high energy pulse in avalanche and commutation modes, RoHS-compliant devices meet stringent 80 PLUS... Read More

Electronic Components & Devices

BiAs Single-Line ESD Protection Diode helps conserve board space.

Jan 22, 2015

Reducing board space required for ESD protection in portable electronics, VESD15A1-HD1-G4-08 bidirectional and symmetrical (BiAs) single-line ESD protection diode provides reverse avalanche breakdown voltage above 15.5 V and low forward voltage from 1.0 x 0.6 x <0.4 mm LLP1006-2L package. Isolation to ground is characterized by leakage current of <0.01 µA and load capacitance of 45 pF at 0 V.... Read More

Electronic Components & Devices

Commercial/Automotive Grade Inductors operate up to +155°C.

Jan 16, 2015

Supplied in 2020 case size with 3 mm profile, Vishay Dale IHLP®-2020CZ-51 and AEC-Q200-qualified IHLP-2020CZ-5A operate from 55 to +155°C and offer inductance ranges from 0.22–15 µH and frequency range of up to 1 MHz. Products handle high transient current spikes without hard saturation, while RoHS-compliant and 100% lead (Pb)-free shielded, composite construction... Read More

Electronic Components & Devices

Surface Mount Rectifiers support automotive applications.

Jan 07, 2015

Housed in SMF eSMP® package, AEC-Q101-Qualified Rectifiers include SS1F4HM3, SS1FH6HM3, and SS2FH6HM3 Schottky models offering 40 and 60 V reverse voltages and forward voltage drops down to 0.37 V at 1 A, 125°C. SE10FJHM3 standard rectifier, built on oxide planar chip technology, provides class H3B ESD protection of >8 kV. Hyperfast VS-1EFH02HM3 and VS-2EFH02HM3 FRED Pt rectifiers... Read More

Electronic Components & Devices, Optics & Photonics

Automotive-Grade PIN Photodiodes have 7.5 mm² sensitive area.

Dec 19, 2014

High-speed silicon PIN photodiodes VEMD5010X01 and VEMD5110X01 come in top-view, SMT packages measuring 5 x 4 x 0.9 mm. For detection of visible and NIR radiation, VEMD5010X01's free cavity is filled with clear epoxy for 430–1,100 nm sensitivity range. For 790–1,050 nm IR applications, VEMD5110X01 utilizes black daylight filtering epoxy and is matched with 850–940 nm IR... Read More

Electronic Components & Devices

High-Current Inductor features integrated e-shield.

Dec 18, 2014

Saving board space by eliminating need for separate board-level shielding, Model IHLE-4040DC-5A contains electric field associated with EMI in tin-plated copper integrated shield, providing up to -20 dB of electric field reduction at 1 cm when shield is connected to ground. RoHS-compliant device features max DCR from 1.66–178 mΩ and inductance values from 0.47–47 µH. Housed in 4040 case... Read More

Electronic Components & Devices

Compact 7 W SMT Resistor offers resistance down to 1 milliohm.

Dec 18, 2014

Offered in 2818 case size that conserves space in automotive, industrial, computer, and consumer applications, Vishay Dale WSHM2818 SMT Power Metal Strip® resistor features solid metal nickel-chrome or manganese-copper alloy resistive element with TCR < 20 ppm/°C. AEC-Q200-qualified product has 1,000-hour load life stability, resistance to short time overload of <±1%, and all-welded... Read More

Electronic Components & Devices

Power Stages target multiphase POL regulators.

Dec 12, 2014

Offered in 3 PowerPAK® package sizes with input voltage range of 4.5–18 V, VRPower® Integrated DrMOS Power Stages are optimized for on-board DC/DC converters in computing and storage equipment, telecom switches, routers, and graphics cards. Gate driver IC is compatible with range of PWM controllers and supports tri-state PWM logic of 5 V and 3.3 V. Diode emulation mode circuitry optimizes... Read More

Electronic Components & Devices

SMT Polymer Tantalum Chip Capacitors offer low ESR in low profile.

Dec 11, 2014

Supplied in J, P, A, B, and T case sizes, Polytech T55 series offers capacitance from 3.3–330 µF over 2.5–10 V range and capacitance tolerance of ±20% for computer, telecom, and industrial applications. These RoHS-compliant and halogen-free, molded chip capacitors, with ESR down to 30 mΩ at +25°C and 100 kHz, employ polymer cathodes and offer ripple current rating up to 1.78 A IRMS.... Read More

Electronic Components & Devices

Trench PT/FS IGBT Platform reduces conduction, switching losses.

Dec 11, 2014

Supplied as bare die, Trench IGBT platform includes Punch Through (PT) and Field Stop (FS) technologies and increases efficiency in motor drives, UPSs, solar inverters, and welding machine inverters. Collector-to-emitter voltages, as well as fast and soft turn-on and turn-off, allow low conduction and switching losses while providing breakdown voltages to 650 V for increased reliability.... Read More

Electronic Components & Devices

N-Channel MOSFETs suit soft switching topologies.

Dec 08, 2014

Built on Super Junction Technology, 600 V Models SiHx28N60EF and SiHx33N60EF are suited for zero voltage switching/soft switching topologies such as phase-shift bridges and LLC converter half bridges. Minimized reverse recovery charge allows devices to regain ability to block full breakdown voltage quickly, helping to avoid failure from shoot-through and thermal overstress. Offered in 4... Read More

Electronic Components & Devices

Energy Storage Capacitors feature energy density of 13 Ws/g.

Dec 03, 2014

With 2.5 mm profile and capacitance values from 4–90 F, 196 HVC ENYCAP™ Series is suitable for energy harvesting and power line backup applications. Units feature voltage ratings from 1.4–8.4 V, soft charging characteristics of less than 1 A, and low leakage current of 0.03–0.24 mA after 24 hr. Available with stacked through-hole, surface-mount flat, and lay flat configurations,... Read More

Electronic Components & Devices

Film Capacitors provide EMI suppression.

Nov 14, 2014

Suited for standard X1 across-the-line applications in industrial power electronics, Series F339X1 comes in voltage ratings of 480 Vac and 330 Vac, with internal series construction and mono construction, respectively. Capacitors offer lead pitches from 7.5–27.5 mm, capacitance values from 0.001–2.2 µF, and permissible DC voltage up to 1,000 V. RoHS-compliant and halogen-free, devices are... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments, Transportation Industry Products

Epoxy-Coated Mini Sensors suit automotive temperature probes.

Nov 14, 2014

Built on advanced NTC thermistor technology, Series NTCLE213E3 has body diameter of <2.5 mm and delivers response times lower than 5 sec in air. AEC-Q200-qualified devices offer resistance from 2.1–100 kΩ at +25°C, with tolerance down to ±1%, and beta (B25/85) from 3511–4190 K, with tolerance down to ±0.5%. Operating from -55 to +150°C with max power dissipation of 100 mW, series... Read More

Electronic Components & Devices

Solid Tantalum Chip Capacitors feature hermetic sealing.

Nov 13, 2014

Intended for military and avionics applications, TANTAMOUNT® Hi-Rel COTS T25 Series offers low ESR down to 180 mΩ at +25°C and 100 kHz, and is available with surge current testing options in accordance with MIL-PRF-55365. Surface mount units feature capacitance range from 16–50 V with tolerances of ±10% and ±20% and operating temperature of -55 to +85°C, +125°C with voltage... Read More

Electronic Components & Devices

Film Capacitors are designed for X1 EMI suppression.

Nov 07, 2014

Targeting X1 across-the-line applications (50–60 Hz) in industrial power electronics, 330 and 480 Vac rated versions of F339X1 respectively feature mono and series construction, capacitance values from 0.001 µF to 2.2 and 1 µF, and permissible DC voltages of 800 and 1,000 V. Both versions are lead (Pb) free, RoHS compliant, and halogen free and feature encapsulation that consists... Read More