Company News


63 Lancaster Ave., Malvern, PA, 19355, USA

  • 610-644-1300

Latest New Product News from

Electrical Equipment & Systems, Electronic Components & Devices, Welding Equipment & Supplies

IGBT Power Modules target TIG welding machines.

Jan 21, 2016

Built on proprietary Trench PT IGBT technology, half-bridge Models VS-GP100TS60SFPbF, VS-GP300TD60S, and VS-GP400TD60S and single-switch Model VS-GP250SA60S provide extremely low collector-to-emitter voltages down to 1.10 V and turn-off switching energy down to 11 mJ for output inverter stages. RoHS-compliant modules feature operating frequencies to 1 kHz and continuous collector current from... Read More

Electronic Components & Devices

Power Stages target notebooks, ultrabooks, and desktops.

Jan 18, 2016

Intended for multiphase POL regulator applications, VRPower® DrMOS Power Stages combine power MOSFETs, advanced MOSFET gate driver IC, and bootstrap Schottky diode. Models SiC530CD, SiC531CD, SiC532CD come in 4.5 x 3.5 mm PowerPAK® MLP4535-22L package with continuous current up to 30 A, while Models SiC631CD and SiC632CD come in 5 x 5 mm PowerPAK MLP55-31L package offering continuous... Read More

Electrical Equipment & Systems

Three-Phase-Bridge Power Modules increase reliability.

Jan 14, 2016

Optimized for AC/DC input rectification and respectively rated at 45, 75, and 100 A, VS 40MT160P-P, VS-70MT160P-P, and VS-100MT160P-P increase reliability for welding machines, UPS, SMPSs, and motor drives. Solderless, low-profile (17 mm) MTP PressFit package offers resistance to shock and vibration and allows one-step PCB mounting. Along with direct mounting to heatsinks, these... Read More

Electronic Components & Devices, Materials & Material Processing

Bidirectional Single-Line ESD Protection Diodes save board space.

Jan 07, 2016

Supplied in 1.95 x 1.5 x 0.95 mm SOD-323 package, VLIN1626-02G and VLIN2626-02G protect automotive data lines against transient voltage signals. Both AEC-Q101-qualified and RoHS-compliant devices, intended for LIN bus applications, provide transient protection for one data line as per IEC 61000 4 2 at ± 30 kV (air and contact discharge). Devices feature load capacitance of 15.5 pF typ (18 pF... Read More

Electronic Components & Devices

Thin Film Resistor Networks feature 1.10 mm seated height.

Dec 02, 2015

Offered in 25 mil pitch, 8-pin MSOP packages, MORN Series delivers low TCR tracking to ±1 ppm/°C, tight ratio tolerances to ±0.01%, and long-term ratio stability of 0.015% after 2,000 hr at +70°C. Four isolated resistors offer resistance values from 400 Ω to 100 kΩ. Surface mount dual-in-line devices provide rugged molded construction and typical power ratings of 50 mW per resistor... Read More

Electronic Components & Devices

Double Insulated Grid Resistors offer power up to 24 kW.

Nov 27, 2015

With power capability from 4–24 kW at +40°C, GRE2 Series is optimized for capacitor pre-charge and discharge, dynamic braking, load testing, and neutral grounding applications in locomotives/transit systems, harmonic filters, and renewable energy systems. Devices offer resistance range from 0.25–50 Ω, with tolerance of ±10% and inductance from 10–40 µH. Featuring welded... Read More

Electronic Components & Devices, Green & Clean, Health, Medical, & Dental Supplies and Equipment, Materials & Material Processing

UV LED offers energy-saving replacement for mercury lamps.

Nov 18, 2015

Built on InGaN technology, Model VLMU5200-385-140 features typical radiant power of 2,500 mW at 500 mA and 3,600 mW at 700 mA in 380–390 nm wavelength range. Ceramic-based unit with silicone lens offers wide emission angle of 140° and provides radiant intensity of 1,054 mW/sr at 700 mA. Housed in 5.2 x 5.2 x 3.1 mm surface-mount package, RoHS-compliant LED is suited for UV curing in... Read More

Electronic Components & Devices

High-Current Inductor operates up to 180°C.

Nov 11, 2015

Supplied in 3232 case size with 4.0 mm profile, Model IHLP-3232DZ-8A provides inductance values from 0.22–33 µH. Unit features frequency range up to 2 MHz and exceeds AEC-Q200 requirements for DC/DC converters and high-current noise filters in high-temperature automotive systems. With 100% lead-free shielded composite construction, RoHS-compliant inductor is specified... Read More

Electronic Components & Devices

SMT Current Sense Resistor has Kelvin 4-terminal connection.

Nov 05, 2015

Offering resistance values from 0.01–0.05 Ω, Vishay Dale WSK1206 Power Metal Strip® current sense resistor reduces system errors while eliminating need for system calibration. Kelvin 4-terminal connection reduces TCR down to 35 ppm and enables tight tolerances of 0.1%, 0.5%, and 1.0% for optimized measurement accuracy. Solid metal nickel-chrome or manganese-copper resistive element with TCR... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Electronic Components & Devices

Surface Mount IR Receivers operate over -30 to +85°C range.

Oct 22, 2015

In SMT Belobog package with 0.8 mm profile and 150° angle of sensitivity, TSOP37xxxE, TSOP57xxxE, and TSSP57xxxE Series support -40 to +110°C storage and have rated floor life of 168 hr per MSL 3. These products, suited for outdoor applications exposed to daily temperature variations/extremes, have no lens and retain 85% of on-axis sensitivity at off-axis angle of 45°. To simplify... Read More

Display & Presentation Equipment, Electrical Equipment & Systems, Electronic Components & Devices, Green & Clean, Vision Systems

Ceramic-Based UV LEDs are designed for extended life.

Oct 14, 2015

Supplied in 3.5 x 3.5 mm SMT packages with silicone lenses, VLMU3500-385-060 and VLMU3500-385-120 respectively feature 60° and 120° emission angles and radiant intensity ratings of 730 and 390 mW/sr at 700 mA. LEDs are built on InGaN technology and feature typical radiant power of 780 mW at 500 mA and 1,037 mW at 700 mA in wavelength range of 380–390 nm. Suited for replacement... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Surface Mount Power MOSFETs feature Kelvin connections.

Oct 09, 2015

Supplied in surface mount PowerPAK® 8 x 8 package, 600 V Models SiHH26N60E, SiHH21N60E, SiHH14N60E, and SiHH11N60E feature large drain terminal for low thermal resistance and Kelvin source connection that can increase efficiency by optimizing gate drive signal. Devices offer low on-resistance down to 0.135 Ω at 10 V and ultra-low gate charge down to 31 nC. RoHS-compliant and halogen-free,... Read More

Electronic Components & Devices

Dual Inductor saves space in Class D amplifiers.

Oct 01, 2015

Combining 2 inductors in one 3232 case size measuring 9.75 x 9.14 mm, automotive-grade Model IHLD-3232HB-5A offers max DCR from 29.2–159.43 mΩ, inductance from 5–33 µH, and rated current to 6.0 A. AEC-Q200-qualified device is manufactured using 100% lead-free shielded composite construction and optimized for automotive and commercial class D amplifier circuits. Operating up to 155°C,... Read More

Electrical Equipment & Systems

Hybrid Solid-State Relays provide noiseless switching.

Sep 17, 2015

Featuring modular design consisting of GaAIAs IRED actuation control and MOSFETs for switch output, Models VOR1142A6, VOR1142B6, and VOR1142M4 are normally open SPST switches supplied in DIP-6, SMD-6, and SOP-4 packages, respectively. Single-channel 1 Form A units offer on-resistance of 22 Ω, load current of 140 mA, load voltage of 400 V, and low turn-on current of 0.25 mA. Electronically... Read More

Electronic Components & Devices

Thick Film Chip Resistors are pulse proof and sulfur resistant.

Sep 10, 2015

In addition to offering pulse-proof performance, Vishay Draloric RCA-IF e3 series provides anti-surge characteristics and sulfur withstand ability in accordance to ASTM B809 95 (tested at 90°C for 1,000 hr). Power ratings range from 0.063–1.0 W, and 7 case sizes are available from 0402–2512. Along with pure tin plating, lead (Pb)-free products feature resistance from 1 Ω to 100 kΩ... Read More

Electrical Equipment & Systems

SMT TVS offer tight ±3.5% breakdown voltage tolerance.

Aug 03, 2015

Supplied in DO-214AA package, suited for automated placement, and available with unidirectional polarity, SMBJXXD series protects sensitive electronics against voltage transients induced by inductive load switching and lightning. These RoHS-compliant and halogen-free TransZorb® transient voltage suppressors (TVS) offer stand-off voltages from 5–188 V. Operating from -55 to +150°C, SMT... Read More

Electronic Components & Devices

Snap-in Power Aluminum Electrolytic Capacitors have 500 V rating.

Jul 30, 2015

Supplied in blue sleeve-insulated, cylindrical aluminum case in 23 sizes from 22 x 25 mm to 35 x 60 mm, 157 PUM-SI series conserves board space in power supplies, industrial motor controls, and solar PV inverters by allowing designers to utilize one component instead of two 250 V capacitors. These polarized aluminum electrolytic capacitors with non-solid electrolyte are RoHS... Read More

Electronic Components & Devices

MLCCs deliver space-level reliability in 7 SMD packages.

Jul 27, 2015

Qualified to MIL-PRF-123 for aerospace and military applications, surface-mount Multilayer Ceramic Chip Capacitors are available with BP and BX dielectrics in 7 body sizes ranging from 0805–2225. Devices with BP dielectric offer low capacitance down to 1.0 pF, temperature coefficient of capacitance of 0 ppm/°C ±30 ppm/°C from -55 to +125°C, and aging rate of 0% max per decade. BX... Read More

Electronic Components & Devices, Vision Systems

IR Emitting Diodes come in SMD top-view package.

Jul 22, 2015

Based on GaAIAs surface emitter chip technology, 850 nm VSMY12850 and 940 nm VSMY12940 offer radiant intensity to 16 mW/sr at 70 mA driving current, switching time of 10 ns, and forward voltage of 1.6 V. SurfLight™ devices are housed in 3.2 x 1.6 x 1.1 mm clear PCB-based packages with inner lenses for surface mounting. Suitable for high pulse current operation to 1 A at 100 µs,... Read More

Controls & Controllers, Sensors Monitors & Transducers

PTC Thermistors provide remote over-temperature sensing.

Jul 20, 2015

Featuring <4.0 mm body diameters, temperature levels from +80 to +150°C, and ±5°C tolerances, PTCSL03 Series provides remote over-temperature sensing in alternative energy, industrial, and consumer applications. Sensors feature max R25 of 120 Ω, max voltage of 30 V, dissipation factor of 5 mW/K, and thermal time constant of 6 s. Consisting of medium-resistivity doped barium titanate... Read More