Vishay
Malvern, PA 19355
Vishay Optoelectronics to Exhibit Latest Light to Digital and Analog Output Sensors at Sensors Expo & Conference 2018
MALVERN, Pa. — June 21, 2018 — The Optoelectronics group of Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for Sensors Expo & Conference 2018, taking place June 26-28 at the McEnery Convention Center in San Jose, California. In booth 435, Vishay will exhibit its latest light to digital and analog output sensor technologies, including infrared (IR), ambient,...
Read More »
Vishay Intertechnology Introduces a New Series of Direct Water-cooled Wirewound Resistors with Power Dissipation up to 9000 W and Minimal External Radiation
The newly released DCRF series of direct water-cooled wirewound resistors are capable of handling 10 times the power of naturally-cooled devices and two times the power of indirectly water-cooled devices. The resistors increase the reliability by limiting the surface temperature and a safe failure mode prevents leakage in an occurrence of a water-flow shutdown. The resistors provide inductance...
Read More »Vishay Intertechnology to Showcase Leading Passive Components and Custom Substrates at IMS2018
Featured Devices to Include High Frequency MLCCs, Surface-Mount Resistors, RF Capacitors, and Wire Bondable RF Inductors Malvern, Pa. — June 5, 2018 — Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the 2018 IEEE MTT International Microwave Symposium (IMS2018), being held June 10-15 at the Pennsylvania Convention Center in Philadelphia, Pennsylvania, in...
Read More »
New IPLA 32 Planar Choke Inductor is Magnetically Shielded for Low EMI
Vishay’s IPLA 32 Planar Choke Inductor is available with 1 μH, 2 μH, 3 μH, and 4 μH inductance values. Unit is offered in 31 mm x 43 mm x 22.2 mm size and is rated for currents up to 110 A. The inductor provides 100 kHz to 800 kHz operating frequency range and features thermal resistance of 2 W/°C to 10.5 W/°C. Unit is suitable for forklifts, electric and hybrid cars and off-road vehicles...
Read More »
New Automotive Grade Phototransistor Optocouplers Feature GaAlAs Infrared Emitting Diode
Vishay’s VOMA617A Phototransistor Optocouplers are available in SOP-4 mini-flat package with high current transfer ratio and a forward current of 5 mA. Units are suitable for signal transmission, battery management, and system control in automotive applications. The SOP-4 package offers an isolation voltage of 3750 V and creepage and clearance distance of ≥ 5 mm. VOMA617A is compliant to...
Read More »
New VEMD8080 PIN Photodiode Offers Low Capacitance for Precise Signal Detection
Vishay’s VEMD8080 PIN Photodiode is available in rectangular 4.8 mm x 2.5 mm surface-mount package with 0.48 mm profile. Featuring ± 65° angle of half-sensitivity and 950 nm wavelength of peak sensitivity, unit can be operated in -40°C to +85°C temperature range in 350 nm to 1100 nm spectrum range. The Photodiode offers a reverse light current of 28 µA and dark current of 0.2 nA. Unit is...
Read More »
Latest Snap-in Power Aluminum Capacitors Come with Ripple Currents up to 4.42 A
Vishay’s 259 PHM-SI Snap-in Power Aluminum Capacitors are offered in case sizes ranging from 22 x 25 mm to 35 x 60 mm with rated voltages from 200 to 500 V. Offering capacitance from 39 µF to 2200 µF, units deliver maximum ESR of 80 mΩ to 3.31 Ω (100 Hz) and impedance of 60 mΩ to 2.44 Ω (10 kHz). The capacitors are suitable for buffering, filtering, and energy storage applications and...
Read More »
New ENYCAP Energy Storage Capacitors Meet Biased 85/85 1000-hour Testing
Vishay’s 225 EDLC-R ENYCAP Capacitors are available in case sizes ranging from 16 mm x 20 mm to 18 mm x 40 mm with capacitance values from 20 F to 60 F. Units offer power density to 4.1 Wh/kg and a maximum rated voltage of 2.7 V. These capacitors provide useful life of 2000 hrs at +85°C temperature and are suitable for applications such as handheld electronics, robotics, solar panels, E-latch...
Read More »
New High Voltage Thyristors and Diodes Provide up to 1000 V/micro seconds Immunity
Vishay’s High Voltage Thyristors and Diodes are available in surface-mount TO-252AA and TO-263AB and TO-247AD package. Thyristors offer a continuous RMS current from 12 A to 79 A and the diodes provide forward current from 8 A to 65 A. Suitable for applications battery chargers in electric vehicles and hybrid electric vehicles, the thyristor enables soft start functionality in inrush current...
Read More »
Vishays New SensorXplorer Starter Kit Offers USB to I2C Interface
Vishay’s SensorXplorer™ Starter Kit is used for test driving light, proximity, UVA light, and RGBW color sensor solutions. Unit’s USB to I²C interface allows reading and displaying of sensor data on a PC. The kit comes with a micro-USB cable and SensorXplorer demo board acts as interface between PC software and USB interface.
Read More »
Vishay Optoelectronics to Exhibit Latest Light to Digital and Analog Output Sensors at Sensors Expo & Conference 2018
MALVERN, Pa. — June 21, 2018 — The Optoelectronics group of Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for Sensors Expo & Conference 2018, taking place June 26-28 at the McEnery Convention Center in San Jose, California. In booth 435, Vishay will exhibit its latest light to digital and analog output sensor technologies, including infrared (IR), ambient,...
Read More »
Vishay Intertechnology Introduces a New Series of Direct Water-cooled Wirewound Resistors with Power Dissipation up to 9000 W and Minimal External Radiation
The newly released DCRF series of direct water-cooled wirewound resistors are capable of handling 10 times the power of naturally-cooled devices and two times the power of indirectly water-cooled devices. The resistors increase the reliability by limiting the surface temperature and a safe failure mode prevents leakage in an occurrence of a water-flow shutdown. The resistors provide inductance...
Read More »Vishay Intertechnology to Showcase Leading Passive Components and Custom Substrates at IMS2018
Featured Devices to Include High Frequency MLCCs, Surface-Mount Resistors, RF Capacitors, and Wire Bondable RF Inductors Malvern, Pa. — June 5, 2018 — Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the 2018 IEEE MTT International Microwave Symposium (IMS2018), being held June 10-15 at the Pennsylvania Convention Center in Philadelphia, Pennsylvania, in...
Read More »
New IPLA 32 Planar Choke Inductor is Magnetically Shielded for Low EMI
Vishay’s IPLA 32 Planar Choke Inductor is available with 1 μH, 2 μH, 3 μH, and 4 μH inductance values. Unit is offered in 31 mm x 43 mm x 22.2 mm size and is rated for currents up to 110 A. The inductor provides 100 kHz to 800 kHz operating frequency range and features thermal resistance of 2 W/°C to 10.5 W/°C. Unit is suitable for forklifts, electric and hybrid cars and off-road vehicles...
Read More »
New Automotive Grade Phototransistor Optocouplers Feature GaAlAs Infrared Emitting Diode
Vishay’s VOMA617A Phototransistor Optocouplers are available in SOP-4 mini-flat package with high current transfer ratio and a forward current of 5 mA. Units are suitable for signal transmission, battery management, and system control in automotive applications. The SOP-4 package offers an isolation voltage of 3750 V and creepage and clearance distance of ≥ 5 mm. VOMA617A is compliant to...
Read More »
New VEMD8080 PIN Photodiode Offers Low Capacitance for Precise Signal Detection
Vishay’s VEMD8080 PIN Photodiode is available in rectangular 4.8 mm x 2.5 mm surface-mount package with 0.48 mm profile. Featuring ± 65° angle of half-sensitivity and 950 nm wavelength of peak sensitivity, unit can be operated in -40°C to +85°C temperature range in 350 nm to 1100 nm spectrum range. The Photodiode offers a reverse light current of 28 µA and dark current of 0.2 nA. Unit is...
Read More »
Latest Snap-in Power Aluminum Capacitors Come with Ripple Currents up to 4.42 A
Vishay’s 259 PHM-SI Snap-in Power Aluminum Capacitors are offered in case sizes ranging from 22 x 25 mm to 35 x 60 mm with rated voltages from 200 to 500 V. Offering capacitance from 39 µF to 2200 µF, units deliver maximum ESR of 80 mΩ to 3.31 Ω (100 Hz) and impedance of 60 mΩ to 2.44 Ω (10 kHz). The capacitors are suitable for buffering, filtering, and energy storage applications and...
Read More »
New ENYCAP Energy Storage Capacitors Meet Biased 85/85 1000-hour Testing
Vishay’s 225 EDLC-R ENYCAP Capacitors are available in case sizes ranging from 16 mm x 20 mm to 18 mm x 40 mm with capacitance values from 20 F to 60 F. Units offer power density to 4.1 Wh/kg and a maximum rated voltage of 2.7 V. These capacitors provide useful life of 2000 hrs at +85°C temperature and are suitable for applications such as handheld electronics, robotics, solar panels, E-latch...
Read More »
New High Voltage Thyristors and Diodes Provide up to 1000 V/micro seconds Immunity
Vishay’s High Voltage Thyristors and Diodes are available in surface-mount TO-252AA and TO-263AB and TO-247AD package. Thyristors offer a continuous RMS current from 12 A to 79 A and the diodes provide forward current from 8 A to 65 A. Suitable for applications battery chargers in electric vehicles and hybrid electric vehicles, the thyristor enables soft start functionality in inrush current...
Read More »Vishay Asia Honored With TTI Supplier Excellence Award for Eighth Consecutive Year
MALVERN, Pa. — May 3, 2018 — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that Vishay Intertechnology Asia Pte Ltd has received the 2017 TTI Asia Supplier Excellence Award. TTI is an authorized specialty distributor of passive, connector, electromechanical, and discrete semiconductor components and the distributor of choice for industrial, military, aerospace, and consumer...
Read More »