Micro-Epsilon
Raleigh, NC 27617
New surfaceCONTROL 3D 3500 Sensor for High-Precision Inspection of Metal, Plastic or Ceramics Surfaces
Full-area measurements achieved via single snapshot in just 0.2 seconds. Minute flatness deviations or height differences are detected. Used for automated 3D measurement of hole spacing, flatness, coplanarity of precision mechanical parts and electronic components.
Read More »
New reflectCONTROL Sensor with High Precision 3D Measurements
Offers high measuring rates at micrometer accuracies. Minute flatness deviations of less than 1 µm are detected. Used for 3D shape detection of wafers in semiconductor production and quality inspection of flat glass.
Read More »
3D Inspection of Unpopulated PCBs
For fully automated inline inspection of unpopulated PCBs, 3D snapshot sensors from Micro-Epsilon are used. Unlike conventional test systems such as microscopes, they are more cost-efficient and work significantly faster. For high-end ceramics substrates, manufacturing tolerances up to 2 µm apply which can be monitored using surfaceCONTROL sensors. With the surfaceCONTROL 3D 3510 snapshot...
Read More »
High Resolution Depth Mapping of Organic Material
Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements of muscle mass or bones in combination with camera systems. This is a completely new approach in the field of microsurgery. With the additional data obtained from the...
Read More »
New White Light Interferometer for Distance and Thickness Measurement
interferoMETER IMS5400-DS with measuring rate up to 6 kHz for high speed measurements. interferoMETER IMS5400-TH for stable measurement from a large distance, even of antireflection-coated targets. interferoMETER IMS5600-DS with subnanometer precision and < 30 picometers resolution.
Read More »
New measurement system measures strips and plates on a non-contact basis.
Available with laser triangulation sensors, laser profile scanners or confocal chromatic sensors. Measures thicknesses from 2 mm to 25 mm. Equipped with an automatic calibration unit that compensates for thermal influences.
Read More »New Sensors Feature Automated Monitoring Of Coil Diameters
The new optoNCDT ILR2250-100 laser distance sensors from Micro-Epsilon continuously detect the coil diameter. Able to detect the coil diameter with highest precision. Products can be used in the processing industry.
Read More »
High-performance Laser Distance Sensor for Large Measurement Distances in Industrial Applications
The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. When...
Read More »
Filling Level Monitoring on Barrel Pumps
Consumable components such as greases, silicones and pastes are supplied by barrel pumps. In order to keep the production processes running, these components must be permanently available. This requires accurate filling level measurement. In order to continuously monitor the fill level of the barrel pump, wireSENSOR WDS-P60 draw-wire sensors from Micro-Epsilon are used. Consumables such as...
Read More »
Miniature Thermal Imaging Camera for Industrial Processes
The thermoIMAGER TIM 160S thermal imaging camera provides precise real-time values in dynamic processes. With a frame rate of 120 Hz, it offers fast measurements surrounded by temperatures up to max. +1500°C. The camera’s robust design makes it suitable for harsh industrial environments. With dimensions of just 45 x 45 x 62 mm and a weight of 195 g, the thermoIMAGER TIM 160S is small and...
Read More »
New surfaceCONTROL 3D 3500 Sensor for High-Precision Inspection of Metal, Plastic or Ceramics Surfaces
Full-area measurements achieved via single snapshot in just 0.2 seconds. Minute flatness deviations or height differences are detected. Used for automated 3D measurement of hole spacing, flatness, coplanarity of precision mechanical parts and electronic components.
Read More »
New reflectCONTROL Sensor with High Precision 3D Measurements
Offers high measuring rates at micrometer accuracies. Minute flatness deviations of less than 1 µm are detected. Used for 3D shape detection of wafers in semiconductor production and quality inspection of flat glass.
Read More »
3D Inspection of Unpopulated PCBs
For fully automated inline inspection of unpopulated PCBs, 3D snapshot sensors from Micro-Epsilon are used. Unlike conventional test systems such as microscopes, they are more cost-efficient and work significantly faster. For high-end ceramics substrates, manufacturing tolerances up to 2 µm apply which can be monitored using surfaceCONTROL sensors. With the surfaceCONTROL 3D 3510 snapshot...
Read More »
High Resolution Depth Mapping of Organic Material
Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements of muscle mass or bones in combination with camera systems. This is a completely new approach in the field of microsurgery. With the additional data obtained from the...
Read More »
New White Light Interferometer for Distance and Thickness Measurement
interferoMETER IMS5400-DS with measuring rate up to 6 kHz for high speed measurements. interferoMETER IMS5400-TH for stable measurement from a large distance, even of antireflection-coated targets. interferoMETER IMS5600-DS with subnanometer precision and < 30 picometers resolution.
Read More »
New measurement system measures strips and plates on a non-contact basis.
Available with laser triangulation sensors, laser profile scanners or confocal chromatic sensors. Measures thicknesses from 2 mm to 25 mm. Equipped with an automatic calibration unit that compensates for thermal influences.
Read More »New Sensors Feature Automated Monitoring Of Coil Diameters
The new optoNCDT ILR2250-100 laser distance sensors from Micro-Epsilon continuously detect the coil diameter. Able to detect the coil diameter with highest precision. Products can be used in the processing industry.
Read More »
High-performance Laser Distance Sensor for Large Measurement Distances in Industrial Applications
The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. When...
Read More »
Filling Level Monitoring on Barrel Pumps
Consumable components such as greases, silicones and pastes are supplied by barrel pumps. In order to keep the production processes running, these components must be permanently available. This requires accurate filling level measurement. In order to continuously monitor the fill level of the barrel pump, wireSENSOR WDS-P60 draw-wire sensors from Micro-Epsilon are used. Consumables such as...
Read More »
Miniature Thermal Imaging Camera for Industrial Processes
The thermoIMAGER TIM 160S thermal imaging camera provides precise real-time values in dynamic processes. With a frame rate of 120 Hz, it offers fast measurements surrounded by temperatures up to max. +1500°C. The camera’s robust design makes it suitable for harsh industrial environments. With dimensions of just 45 x 45 x 62 mm and a weight of 195 g, the thermoIMAGER TIM 160S is small and...
Read More »