Phihong USA Inc.
Fremont, CA 94538
High-Power Midspan includes 4 x 36 W ports.
Model POE125U-4HP Gigabit PoE midspan device offers full power for 4 broadband access points or security cameras with heaters. It features 802.3af detection and disconnect as well as pre-standard IEEE802.3at classification. Offering full power support to Cisco AP1250 access points, rack-mountable device also provides over-voltage, over-current, and short-circuit protection.
Read More »
GUI Console is designed for SNMP-capable midspans.
Suited for use with Simple Network Management Protocol (SNMP)-capable midspans that provide 15.4 W of power per port for VoIP phones, security cameras, and access points, GUI console allows network administrators to remotely monitor and reset devices in any location with internet access.
Read More »
Phihong's 60w Midspan Powers Wireless, Wimax Access Points
Fremont, Calif.- (May 21, 2007) -Phihong USA, a global leader in Power-over-Ethernet solutions, has introduced a 60W midspan and a 52W PoE Gigabit high-power splitter specifically designed to support high-power wireless access points. Designated the POE60U-560G, the midspan is designed to power wireless access point arrays and WiMAX access points that require up to 52 watts of power. The POE60D...
Read More »Single-Port Midspan powers wireless WiMAX access points.
Designed to IEEE802.3at standards, 60 W midspan (POE60U-560G) and 52 W PoE Gigabit high-power splitter (POE60D) are suited for implementing PoE to power multi-radio access point arrays in business and educational environments. Midspan powers wireless access point arrays and WiMAX access points that require up to 52 W of power, while splitter mounts directly next to powered device to perform...
Read More »Phihong's Universal Linear Replacement Adapter Line Meets CEC Requirements
Linear replacement adapters provide energy-efficient alternative.... FREMONT, Calif. (May 15, 2007) - Phihong USA, the global leader in external power supplies, has developed a series of linear replacement products designed as a low cost replacement for non-compliant linear adapters. Designated the PLA Series, the universal input California Energy Commission (CEC)-compliant products are very...
Read More »Phihong Offers a Wide Range of Adapter Models that are CEC-Compliant
OEMs impacted by environmental regulations' January 1st, 2007 deadline.... FREMONT, Calif. (October 5, 2006) - Phihong USA, the global leader in external power supplies, has released a complete line of desktop and wallplug adapters that meet the specifications for external power supplies as required by the California Energy Commission as of January 1, 2007. The company, which is active in many...
Read More »
Midspan powers wireless and WiMAX access points.
Suited for applications implementing 802.11n standard that require up to 24 W of power, POE30U Series 30 W 1-port midspan features diagnostic LEDs and outputs equipped with short circuit and overload protection. DC output voltage is 56 V with overload detection to 0.55 A, and AC input range is 90-264 Vac, with voltage rating from 100-240 Vac and AC input frequency from 47-63 Hz. Applications...
Read More »
PoE Midspans are SNMP-capable.
Power-over-Ethernet (PoE) midspans come in 1-, 8-, 16-, and 24-port versions with Simple Network Management Protocol (SNMP), which enables network administrators to manage and monitor networks as well as remotely diagnose and solve any network problem. Designed for use in managed networks, products provide 15.4 W of power per port and can send traps when monitored device overloads or shuts down,...
Read More »
Remote Power Solution works with IP security cameras.
Comprised of PSD14 splitter and POE20U midspan, Power-over-Ethernet (PoE) package adds power to Ethernet cables and separates power and data at camera. Midspan provides up to 20 W of power, and PSD14 splitter offers up to 14 W of dc power to camera at end of 100 m cable. Both are compliant with IEEE 802.3af standards and feature LED indicators. Available in 5 and 12 V versions, PSD14 comes in...
Read More »
PoE Splitter delivers up to 14 W of power.
Suited for wireless network and IP applications, Series PSD14 DC-DC Power-over-Ethernet Splitter mounts next to Ethernet device, and is fully compliant with IEEE 802.3af standards. Input voltage is 36-56 Vdc and output voltage is 12, 5, or 3.3 V, depending upon model. Measuring 3.7 x 2.0 x 1.2 in., device is available in non-vented case with 10Base-T, 100Base-T, and 1000Base-T data rates. It is...
Read More »