Chemline

Composite Production Board suits masonry applications.
Adhesives & Sealants

Composite Production Board suits masonry applications.

Composite of Chemthane 7030 two-component, 100% solids spray polyurethane and rigid wood or wood laminate core is used in production of concrete and masonry form and support products. Polymer resin, which is 100% solids and zero-VOC formulated, is sprayed directly to prepared wooden substrate to form seamless, plastic barrier against abrasion, impact, and tearing. Even if punctured or torn,...

Read More »
Polyurethane Polymer repairs concrete in 10 minutes.
Adhesives & Sealants

Polyurethane Polymer repairs concrete in 10 minutes.

Operating at temperatures as low as -40°F, CHEMCRETE 1800 2-component polyurethane deep penetrating polymer cures to acheive strength and durability of concrete. Low viscosity compound does not freeze when exposed to frozen base concrete and is suited for repairing hairline cracks, control joints, or securing bolts for equipment or hand railings. Used neat or in combination with sand or...

Read More »
Epo-Lux 221 for Ultimate Pool Recoating for Long Term Protection
Paints & Coatings

Epo-Lux 221 for Ultimate Pool Recoating for Long Term Protection

Increased Flexibility, Weather Resistance and Durability in a Direct-To-Concrete Formula (ST. LOUIS - February 15, 2006) - Repainting swimming pools can be completed faster and more efficiently while providing longer-lasting protection with the Chemline's EPO-LUX 221SP, a direct-to-concrete, high-build masonry coating that requires no primer and provides exceptional coverage. Designed for use on...

Read More »
Paints & Coatings

Polyurea Coating extends service life of wooden structures.

Engineered for wood, plywood, particle board, and corrugated structures, 2-component CHEMTHANE 7035 consists of 100% solids elastomeric polyurea that cures in 6-8 sec. It is sprayed directly to prepared wooden substrate to form seamless, plastic barrier against abrasion, impact, and tearing. Product also hides seams and imperfections in prepared surface without excessive epoxy mastics, Bondo®...

Read More »
Paints & Coatings

Coating protects pipelines from corrosion.

Containing no solvents, CHEMTHANE 2261 100% solids, zero VOC, 2-component polyurethane coating can be air-sprayed directly in thicknesses from 40-60 mils without additional primer. It features Shore D hardness of 75 and cure time of less than 5 minutes at 77°F. Formulated to have balance between cold-temperatures and heat resistance, coating resists cracking and delamination while also...

Read More »
Paints & Coatings

Coating lines potable water tanks and pipes.

Zero-VOC polyurethane coating, CHEMTHANE 4200PW, can be spray-applied in single coat directly to prepared steel, iron, or concrete substrate without any primers. Since product contains no solvents, there is no taste or odor transferred into water. With 1:1 plural component mix ratio, users can achieve film build of 15-70+ mils in single pass application. Coating features cure-to-touch time of 6-8...

Read More »
Acrylic Polyurethane Coating suits industrial applications.
Paints & Coatings

Acrylic Polyurethane Coating suits industrial applications.

Chemical-resistant Chemthane 3300 adds smooth, glossy finish to steel, iron, galvanizing, aged fiberglass, concrete, masonry, and wood substrates. Formulated in 1:3 mix ratio with pigmented acrylic enamel and polyisocyanate hardener, low-VOC coating can be applied by brush, roller, or single component airless pump. It is offered in various colors and exhibits resistance to acids, alkalis,...

Read More »
Potable Water Lining protects against corrosion.
Paints & Coatings

Potable Water Lining protects against corrosion.

CHEMTHANE 2240PW 100% solids coating, engineered for lining potable water tank and pipe applications, can be spray-applied in one coat directly to prepared steel, iron, or concrete substrate. Solvent-free product will not transfer taste or odor into water. Suited for immersion service, aromatic polyurethane allows applicators to achieve film build of 15-70+ mil in one pass. Product also features...

Read More »
Polyurethane Coating protects underground tanks/pipelines.
Paints & Coatings

Polyurethane Coating protects underground tanks/pipelines.

CHEMTHANE 2260(TM) solvent-free, 2-component polyurethane coating is applied directly to prepared steel, ductile iron, or concrete to provide corrosion protection for substrate. This 100% solids (Zero VOC) polyurethane, used to protect underground tanks, pipelines and pilings, cures to form hard polymer film that demonstrates resistance to adhesion, abrasion, and chemicals. It achieves high film...

Read More »
Fire Retardant Coating protects fragile substrates.
Adhesives & Sealants

Fire Retardant Coating protects fragile substrates.

EURO-SEAL 7000 polyurethane encapsulant, suited for use on carved architectural EPS and polyurethane foam elements, provides protection from thermal expansion and UV degradation and strengthens mechanical impact resistance. Able to dry to touch within 10 sec, 2-component, spray-applied polyurethane coating forms hard, chemical-, moisture-, and fire-retardant encapsulation. It enables fabricators...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers