Chemline

Cast Elastomer Systems meets cure, performance needs sans mercury.
Materials

Cast Elastomer Systems meets cure, performance needs sans mercury.

Mercury-free cold cast elastomer systems for molds, rollers, liners, and cast urethane parts can cure in warm, humid conditions, which meets needs of manufacturers of large molded parts necessitating long open times. Available in custom formulations for any application, these 100% solids, zero VOC systems offer hardness from Shore A 40 to Shore D 80 and can be hand mixed or machine...

Read More »
Fast-Set 100% Solids Steel Coatings can be layered to 150 mil.
Paints & Coatings

Fast-Set 100% Solids Steel Coatings can be layered to 150 mil.

Providing steel structures with protection against corrosion, abrasion, impact, and chemicals, polyurea coatings are formulated with zero VOCs and cure to touch within few seconds. Cut-resistant solutions, supporting direct to metal application or use with Chemline Primers, let OEMs applyÂ- thick protective plastic membrane around steel structures via pressurized, heated, dual-component,...

Read More »
Direct-to-Metal Coating for Galvanized Steel Poles & Structures
Paints & Coatings

Direct-to-Metal Coating for Galvanized Steel Poles & Structures

St. Louis, MO (USA) -- Let's face it, in a perfect world, galvanizing steel poles will provide a good level of protection against corrosion and pole failure. Unfortunately, this is an imperfect world. Before the pole leaves the factory, scratches, dents and ding will quickly compromise the zinc galvanizing and lead to pre-mature failure. To help prevent damage and protect the pole during...

Read More »
Polyurea Elastomer Joint Sealer seals concrete substrates.
Adhesives & Sealants

Polyurea Elastomer Joint Sealer seals concrete substrates.

With ability to cure to touch in 60 sec, CHEMTHANE 8190 two-part polyurea elastomer is suited for repairing spalled joints, as well as filling random cracks and patching gouges, holes, and surface defects. It cures in applications ranging from freezing conditions to 130°F, and becomes ready trimming flush within 20 min. Non-brittle product allows floor to move, and prevents contaminants...

Read More »
Non-Industrial Products

Polyurea Lining protects geotextile, steel surfaces.

With 15-20 sec cure time at 75°F, CHEMTHANE 6020 is 100% solids, zero VOC, elastomeric polyurea membrane that can be used for primary and secondary containment applications. Featuring tensile strength ranging from 2,000 psi, 85 Shore A hardness, and 200% elongation, spray-applied polyurea lining also bridges hairline cracks in concrete containment areas of chemical and wastewater plants....

Read More »
Water-Borne Epoxy Coating creates fast-drying floor finish.
Paints & Coatings

Water-Borne Epoxy Coating creates fast-drying floor finish.

With mix ratio of 4A:1B, Monomid(TM) Epoxy Flooring System forms cleanable, high-gloss finish. It offers 5 mils DFT in one coat when applied over Monomid Clear Sealer and can be applied over various other primers for application on steel. Solution supports addition of anti-slip aggregate or sand and also offers moisture resistance. In 3 hr at 77Â-ºF, coating dries to touch to form abrasion-...

Read More »
Wear Resistant Polyurethane suits dunnage applications.
Transportation Industry Products

Wear Resistant Polyurethane suits dunnage applications.

Providing safe storage and transportation of delicate products and materials, full density, MDI-based CHEMTHANE 8010 is used in automotive and truck manufacturing for in-process racks, material handling racks, and storage and transportation of molded body parts, glass panels, and interior trim. Product offers Shore A hardness of 90-100, 1A:2B mix ratio by volume, and 6 minute cure time. CHEMTHANE...

Read More »
Polyurethane Coating suits athletic/pedestrian floors.
Paints & Coatings

Polyurethane Coating suits athletic/pedestrian floors.

CHEMTHANE 3900 aliphatic polyurethane coating has 1:1 mix ratio and provides abrasion and scuff resistance. It withstands high temperature from 180-250°F, and can be applied on surface with temperatures from 45-120°F. Weather- and impact-resistant coating also resists effects of gasoline, oils, anti-freeze, and salts while providing slip and stain resistance. It can be applied with...

Read More »
Paints & Coatings

Roof Coating is aluminum colored to boost UV stability.

Mold and fungus resistant CHEMTHANE 6100 is waterproof and features reflective rating of 0.52-0.62. Spray-applied hybrid polyurea cures to touch in less than 15 seconds, has tensile strength of 1,500 psi, and 250% elongation to withstand rigorous thermal conditions. Solvent-free, 100% solids, zero VOC coating can be used for spray polyurethane foam roofing, concrete, built-up roofing systems,...

Read More »
Paints & Coatings

Epoxy Coating is designed for swimming pools.

Steelcote EPO-LUX 221SP imparts protection to and facilitates repainting of swimming pools. Suited for use on poured-in-place, aged concrete as well as fiberglass, this masonry coating requires no primer and has direct-to-concrete, high-build formula that can be sprayed, rolled, or brushed onto surface. Product is resistant to chlorine and other chemicals as well as moisture penetration....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers