Chemline
Saint Louis, MO 63115
Share:
Polyurea Elastomer Joint Sealer seals concrete substrates.
With ability to cure to touch in 60 sec, CHEMTHANE 8190 two-part polyurea elastomer is suited for repairing spalled joints, as well as filling random cracks and patching gouges, holes, and surface defects. It cures in applications ranging from freezing conditions to 130Ã-
Read More »
Wear Resistant Polyurethane suits dunnage applications.
Providing safe storage and transportation of delicate products and materials, full density, MDI-based CHEMTHANE 8010 is used in automotive and truck manufacturing for in-process racks, material handling racks, and storage and transportation of molded body parts, glass panels, and interior trim. Product offers Shore A hardness of 90-100, 1A:2B mix ratio by volume, and 6 minute cure time. CHEMTHANE...
Read More »Roof Coating is aluminum colored to boost UV stability.
Mold and fungus resistant CHEMTHANE 6100 is waterproof and features reflective rating of 0.52-0.62. Spray-applied hybrid polyurea cures to touch in less than 15 seconds, has tensile strength of 1,500 psi, and 250% elongation to withstand rigorous thermal conditions. Solvent-free, 100% solids, zero VOC coating can be used for spray polyurethane foam roofing, concrete, built-up roofing systems,...
Read More »
Epo-Lux 221 for Ultimate Pool Recoating for Long Term Protection
Increased Flexibility, Weather Resistance and Durability in a Direct-To-Concrete Formula (ST. LOUIS - February 15, 2006) - Repainting swimming pools can be completed faster and more efficiently while providing longer-lasting protection with the Chemline's EPO-LUX 221SP, a direct-to-concrete, high-build masonry coating that requires no primer and provides exceptional coverage. Designed for use on...
Read More »Polyurea Coating extends service life of wooden structures.
Engineered for wood, plywood, particle board, and corrugated structures, 2-component CHEMTHANE 7035 consists of 100% solids elastomeric polyurea that cures in 6-8 sec. It is sprayed directly to prepared wooden substrate to form seamless, plastic barrier against abrasion, impact, and tearing. Product also hides seams and imperfections in prepared surface without excessive epoxy mastics, Bondo-®...
Read More »Coating protects pipelines from corrosion.
Containing no solvents, CHEMTHANE 2261 100% solids, zero VOC, 2-component polyurethane coating can be air-sprayed directly in thicknesses from 40-60 mils without additional primer. It features Shore D hardness of 75 and cure time of less than 5 minutes at 77Ã-
Read More »Coating lines potable water tanks and pipes.
Zero-VOC polyurethane coating, CHEMTHANE 4200PW, can be spray-applied in single coat directly to prepared steel, iron, or concrete substrate without any primers. Since product contains no solvents, there is no taste or odor transferred into water. With 1:1 plural component mix ratio, users can achieve film build of 15-70+ mils in single pass application. Coating features cure-to-touch time of 6-8...
Read More »
Acrylic Polyurethane Coating suits industrial applications.
Chemical-resistant Chemthane 3300 adds smooth, glossy finish to steel, iron, galvanizing, aged fiberglass, concrete, masonry, and wood substrates. Formulated in 1:3 mix ratio with pigmented acrylic enamel and polyisocyanate hardener, low-VOC coating can be applied by brush, roller, or single component airless pump. It is offered in various colors and exhibits resistance to acids, alkalis,...
Read More »
Potable Water Lining protects against corrosion.
CHEMTHANE 2240PW 100% solids coating, engineered for lining potable water tank and pipe applications, can be spray-applied in one coat directly to prepared steel, iron, or concrete substrate. Solvent-free product will not transfer taste or odor into water. Suited for immersion service, aromatic polyurethane allows applicators to achieve film build of 15-70+ mil in one pass. Product also features...
Read More »
Polyurethane Coating protects underground tanks/pipelines.
CHEMTHANE 2260(TM) solvent-free, 2-component polyurethane coating is applied directly to prepared steel, ductile iron, or concrete to provide corrosion protection for substrate. This 100% solids (Zero VOC) polyurethane, used to protect underground tanks, pipelines and pilings, cures to form hard polymer film that demonstrates resistance to adhesion, abrasion, and chemicals. It achieves high film...
Read More »Chemline Inc. Acquires T.A. Davies (TADCO)
St. Louis, MOÃ- Ã- - Chemline, Inc. of St. Louis, Mo has purchased the T. A. Davies Company (TADCO) of Rancho Dominguez, CA. TADCO has been an innovative formulator of specialty cold-cast polyurethane chemicals since 1972. For many years, the company focused on urethane technologies for bowling ball cover stocks, flexible architectural trim moldings and a variety of roto-moldable urethane...
Read More »
Polyurea Elastomer Joint Sealer seals concrete substrates.
With ability to cure to touch in 60 sec, CHEMTHANE 8190 two-part polyurea elastomer is suited for repairing spalled joints, as well as filling random cracks and patching gouges, holes, and surface defects. It cures in applications ranging from freezing conditions to 130Ã-
Read More »
Wear Resistant Polyurethane suits dunnage applications.
Providing safe storage and transportation of delicate products and materials, full density, MDI-based CHEMTHANE 8010 is used in automotive and truck manufacturing for in-process racks, material handling racks, and storage and transportation of molded body parts, glass panels, and interior trim. Product offers Shore A hardness of 90-100, 1A:2B mix ratio by volume, and 6 minute cure time. CHEMTHANE...
Read More »Roof Coating is aluminum colored to boost UV stability.
Mold and fungus resistant CHEMTHANE 6100 is waterproof and features reflective rating of 0.52-0.62. Spray-applied hybrid polyurea cures to touch in less than 15 seconds, has tensile strength of 1,500 psi, and 250% elongation to withstand rigorous thermal conditions. Solvent-free, 100% solids, zero VOC coating can be used for spray polyurethane foam roofing, concrete, built-up roofing systems,...
Read More »Chemline Acquires Steelcote Manufacturing
St. Louis, MO - Chemline announces today that it has acquired the assets of Steelcote Manufacturing Incorporated, a manufacturer of high performance epoxy and polyurethane coatings. This information is according to John Henningsen, spokesperson for Chemline. Steelcote Manufacturing is company with a long and storied past. Comment Mr. Henningsen. The company was founded in 1915 in St. Louis,...
Read More »
Epo-Lux 221 for Ultimate Pool Recoating for Long Term Protection
Increased Flexibility, Weather Resistance and Durability in a Direct-To-Concrete Formula (ST. LOUIS - February 15, 2006) - Repainting swimming pools can be completed faster and more efficiently while providing longer-lasting protection with the Chemline's EPO-LUX 221SP, a direct-to-concrete, high-build masonry coating that requires no primer and provides exceptional coverage. Designed for use on...
Read More »Polyurea Coating extends service life of wooden structures.
Engineered for wood, plywood, particle board, and corrugated structures, 2-component CHEMTHANE 7035 consists of 100% solids elastomeric polyurea that cures in 6-8 sec. It is sprayed directly to prepared wooden substrate to form seamless, plastic barrier against abrasion, impact, and tearing. Product also hides seams and imperfections in prepared surface without excessive epoxy mastics, Bondo-®...
Read More »Coating protects pipelines from corrosion.
Containing no solvents, CHEMTHANE 2261 100% solids, zero VOC, 2-component polyurethane coating can be air-sprayed directly in thicknesses from 40-60 mils without additional primer. It features Shore D hardness of 75 and cure time of less than 5 minutes at 77Ã-
Read More »Coating lines potable water tanks and pipes.
Zero-VOC polyurethane coating, CHEMTHANE 4200PW, can be spray-applied in single coat directly to prepared steel, iron, or concrete substrate without any primers. Since product contains no solvents, there is no taste or odor transferred into water. With 1:1 plural component mix ratio, users can achieve film build of 15-70+ mils in single pass application. Coating features cure-to-touch time of 6-8...
Read More »
Acrylic Polyurethane Coating suits industrial applications.
Chemical-resistant Chemthane 3300 adds smooth, glossy finish to steel, iron, galvanizing, aged fiberglass, concrete, masonry, and wood substrates. Formulated in 1:3 mix ratio with pigmented acrylic enamel and polyisocyanate hardener, low-VOC coating can be applied by brush, roller, or single component airless pump. It is offered in various colors and exhibits resistance to acids, alkalis,...
Read More »