Chemline
Saint Louis, MO 63115
Share:
New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology
The Chemline 2265 ARO Overcoat offers impenetrable membrane that acts as sacrificial second layer. The product is formulated without abrasive fillers and has a highly-compatible bond. The overcoat is applied at final thickness of >60 mils to form an ultra-durable and resistant outer shell. It is formulated to minimize the overspray fog in the application area and without plasticizers, tar, or...
Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...
Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...
Read More »
Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.
Chemline 7850 Polyurethane Resin offers hardness of shore 95 A, tear strength of 240 pli and elongation of 100 %. Unit allows user to create large sheets of artificial bark, brick work or rock wall. Product is suitable for Graco Reactor E-XP2 or H-XP2 equipment and is applied 1:1 high pressure. Resin is ideal for amusement parks, zoos, museums, casinos and point of purchase display applications.
Read More »
Chemline 7025 Polyurea Hybrid Coating offers tensile strength of 3500 psi.
Chemline 7025 Polyurea Hybrid Coating provides resistance against rust and corrosion to protect trucks and trailers. Unit contains 100% solids and zero VOCs. Product offers hardness of Shore 90 A, tear strength of 350 pli and elongation of 250 %. Applied with a 1:1 high pressure,this coating comes with a gel time of 8 seconds and is suitable for humid application environments.
Read More »
Chemline Offers High-Performing, Environmentally-Friendly Cold Cast Elastomers
St. Louis, MO – Chemline, Inc. manufactures cold cast urethane elastomers and foams formulated for a variety of applications, from soft gels and foams to very hard plastics. These systems can be applied at room temperature and do not require post-curation, making them fast and simple to produce. Chemline’s cold cast systems can be processed by hand or machine (low and high pressure), and can...
Read More »
Hot Cast Prepolymers from Chemline Deliver High Performance for the Toughest Applications
St. Louis, MO - Chemline, Inc. manufactures hot cast urethane prepolymers for use in the most rigorous applications where the highest performance is required. Processing these materials typically involves heated components and tooling, along with a hot post-cure to optimize properties. Custom formulations are available in a wide range of durometers - from 20 Shore A to 85 Shore D - that possess...
Read More »
Chemline Premium Concrete Coatings Protect Structural Integrity and Reduce Down Time
St. Louis, MO - Chemline fast-set spray polyurea coatings protect concrete and precast concrete by preventing moisture migration from the surface into the substrate, where it can cause significant corrosion to the internal rebar and impact structural integrity. Chemline coatings also reduce costly down time on the plant floor by allowing for a quick return of treated materials to production....
Read More »
Chemline Wood Coatings provide moisture and UV resistance.
Suitable for protecting wood surfaces in industries like shipping crates and containers, boat hulls and decks, hard wood speaker cabinets, Chemline Wood Coatings are 100% Solids (No VOCs) with rapid curing polyurea (5-10 second gel times). Providing extreme abrasion, impact resistance and low permeability even in -20° F temperature, coatings are Class A fire resistant and give coating hardness...
Read More »Chemline rigid foam products are ozone friendly
Suitable for rock and stone replication, architectural elements, building facades, signs, props, archery targets, Chemline’s rigid foam products include environmentally friendly raw materials. Available in variable ratios including 1:1, foam comes without 245fa or hazardous blowing agents. Units are available in density ranging from 2 to 20 pounds per cubic foot.
Read More »
New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology
The Chemline 2265 ARO Overcoat offers impenetrable membrane that acts as sacrificial second layer. The product is formulated without abrasive fillers and has a highly-compatible bond. The overcoat is applied at final thickness of >60 mils to form an ultra-durable and resistant outer shell. It is formulated to minimize the overspray fog in the application area and without plasticizers, tar, or...
Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...
Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...
Read More »
Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.
Chemline 7850 Polyurethane Resin offers hardness of shore 95 A, tear strength of 240 pli and elongation of 100 %. Unit allows user to create large sheets of artificial bark, brick work or rock wall. Product is suitable for Graco Reactor E-XP2 or H-XP2 equipment and is applied 1:1 high pressure. Resin is ideal for amusement parks, zoos, museums, casinos and point of purchase display applications.
Read More »
Chemline 7025 Polyurea Hybrid Coating offers tensile strength of 3500 psi.
Chemline 7025 Polyurea Hybrid Coating provides resistance against rust and corrosion to protect trucks and trailers. Unit contains 100% solids and zero VOCs. Product offers hardness of Shore 90 A, tear strength of 350 pli and elongation of 250 %. Applied with a 1:1 high pressure,this coating comes with a gel time of 8 seconds and is suitable for humid application environments.
Read More »
Chemline Offers High-Performing, Environmentally-Friendly Cold Cast Elastomers
St. Louis, MO – Chemline, Inc. manufactures cold cast urethane elastomers and foams formulated for a variety of applications, from soft gels and foams to very hard plastics. These systems can be applied at room temperature and do not require post-curation, making them fast and simple to produce. Chemline’s cold cast systems can be processed by hand or machine (low and high pressure), and can...
Read More »
Hot Cast Prepolymers from Chemline Deliver High Performance for the Toughest Applications
St. Louis, MO - Chemline, Inc. manufactures hot cast urethane prepolymers for use in the most rigorous applications where the highest performance is required. Processing these materials typically involves heated components and tooling, along with a hot post-cure to optimize properties. Custom formulations are available in a wide range of durometers - from 20 Shore A to 85 Shore D - that possess...
Read More »
Chemline Premium Concrete Coatings Protect Structural Integrity and Reduce Down Time
St. Louis, MO - Chemline fast-set spray polyurea coatings protect concrete and precast concrete by preventing moisture migration from the surface into the substrate, where it can cause significant corrosion to the internal rebar and impact structural integrity. Chemline coatings also reduce costly down time on the plant floor by allowing for a quick return of treated materials to production....
Read More »
Chemline Wood Coatings provide moisture and UV resistance.
Suitable for protecting wood surfaces in industries like shipping crates and containers, boat hulls and decks, hard wood speaker cabinets, Chemline Wood Coatings are 100% Solids (No VOCs) with rapid curing polyurea (5-10 second gel times). Providing extreme abrasion, impact resistance and low permeability even in -20° F temperature, coatings are Class A fire resistant and give coating hardness...
Read More »Chemline rigid foam products are ozone friendly
Suitable for rock and stone replication, architectural elements, building facades, signs, props, archery targets, Chemline’s rigid foam products include environmentally friendly raw materials. Available in variable ratios including 1:1, foam comes without 245fa or hazardous blowing agents. Units are available in density ranging from 2 to 20 pounds per cubic foot.
Read More »