Binder-USA, LP
Camarillo, CA 93012
Solenoid Valve Connectors are available with metric threads.
Offered in 3 types/sizes, A and B solenoid valve connectors include M16 x 1.5 threads, while M12 x 1.5 threads are used on type C connectors. Available with 2 or 3 contacts plus ground, connectors support cable having 4-10 mm outer dia. Field attachable solenoid connectors are sealed to IP65, and come in black or white high/low profile housings.
Read More »
Threaded Connectors have field-attachable design.
Series 820 of 7/8 in. threaded connectors are available with 3, 4, or 5 gold-plated contacts, each of which has max current carrying capacity of 12 A and screw termination that supports up to 16 AWG wire. All connectors are sealed to IP67 due to pinch ring that supports cable diameters from 6-14 mm and also acts as strain relief.
Read More »
Overmolded Threaded Connectors are sealed to IP68.
Series 870 7/8 in. overmolded threaded connectors come with 3, 4, or 5 gold-plated contacts with current carrying capacity of up to 13 A each. Sealed to IP68, connectors have been tested to survive water submersion to depth of 18 m for up to 24 hr. High degree of sealing is achieved through use of elastic, self-sealing contact carrier made of PUR. Connectors are overmolded to cable lengths of 2-5...
Read More »
M12 Connectors come with soldercup contacts.
Enabling users to self-solder wires having non-standard length or color to sockets, Series 763 male and female receptacles feature 4 or 5 gold-plated contacts supporting up to 4 A. Mateable with all industry standard a-coded M12 connectors, sockets provide protection rating of IP67 when assembled and mated. Front and rear mounting types are available for both genders. Connectors' termination area...
Read More »
M12 Connectors minimize surface area needed for mounting.
Featuring M12 rear thread, Series 713 Connectors can be mounted to panels up to 3 mm thick. Units are fixed from rear of panel with hexagonal nut. Male sockets with a-coding are offered in 4-, 5-, and 8-pin versions, while b-coded version is available with 4 pins. Solder-cup contacts allow wires of any length to be terminated.
Read More »
Machine Connectors offer overmolded option.
Available for straight and angled, male and female plugs, Series 692 Connectors with overmolded option feature 3+PE silver-plated contacts with current carrying capacity up to 13 A each. Contacts are crimped to four 1.5 mmÃ-² conductors encased in UL-approved, PVC-jacketed cable with outer diameter of 8.6 mm. Standard cable lengths are 2 m and other lengths are available upon request. All...
Read More »
Binder Enhances M8 to M12 Adapter Design
765/768 Series M8 to M12 Adapters Camarillo, CA - Binder-USA is proud to announce a recent innovation to the 765/768 series M8 to M12 adapters. To maximize usability, turnable metal threaded rings have been added to both ends of the connector. This change allows easier mating of connecting cables. The new 765 series adapters are available in 3 and 4 pole versions and in a variety of...
Read More »
Threaded T-Connector is suited for Fieldbus applications.
Sealed to IP67, 7/8 in. threaded connectors in Series 870 are available with 5 poles per port. Connector features 2 female ports and 1 male port. Intended for use in ring connections in Fieldbus applications, product makes it possible to connect single modules without interrupting bus or power supply. Connector housing is plastic (TPU) with nickel-plated brass locking rings.
Read More »
Shielded M12 Connectors Accommodate Larger Wire Sizes and Ferrules
Camarillo, CA - April 20th, 2006 - Binder's 713, 715, and 825 series 3, 4 and 5 pole M12 connectors with screw termination can now be connected with large diameter wires having a cross section of up to 0.75mm-² (approx. 18 AWG) with or without ferrule. For screw terminations, ferrules are used to prevent the breakage of wire strands. This increases the diameter of each conductor. To assure easy...
Read More »
Cage Clamp Termination minimizes connection time.
Suited for 713 and 715 Series field attachable M12 connectors as well as 825 Series D-coded industrial Ethernet connectors, Cage Clamp Termination ensures permanent pressure of each conductor onto its respective contact for shock and vibration resistant connection. With termination, all 3 series maintain protective rating of IP67. Shielded and unshielded options are available.
Read More »