Binder-USA, LP

M8 Eight-Pin Receptacles suit space-constricted applications.
Construction Equipment and Supplies

M8 Eight-Pin Receptacles suit space-constricted applications.

Series 768 and 718 M8 include 8-pin, panel-mount receptacles for applications requiring high pin numbers in areas with limited space. Commonly used for sensors and actuators in industrial and automation industries, connectors offer termination styles with pre-attached wires or dip solder contacts. Gold-plated contacts can withstand 30 V max and up to 1.5 A each, and receptacles are rated IP67...

Read More »
Construction Equipment and Supplies

NCC Connectors are IP67-rated when unmated.

Suited for environments where frequent spillages and wash-downs are expected, Series 770 includes panel-mounted receptacle with internal sliding cap that moves forwardÂ- to seal contact area when plug is disconnected from receptacle. Bayonet locking accelerates and facilitates reliable mating/demating of connector halves, while visual indicators on plug and receptacle assist in...

Read More »
Snap-in Panel-Mount Connectors offer dip solder contacts.
Construction Equipment and Supplies

Snap-in Panel-Mount Connectors offer dip solder contacts.

Series 720 snap-in panel-mount receptacles are available with dip solder contacts, providing options for applications requiring direct assembly toÂ- PCB. Suited for commercial and medical applications due to quick connect and disconnect feature, connectors have all-plastic shell with 16 mm OD. Male and female versions are offered with 3, 5, 8, or 12 gold-plated...

Read More »
M12 Connectors feature S-coding design.
Construction Equipment and Supplies

M12 Connectors feature S-coding design.

Suitable for power applications, Series 814 can accept wires up to 16 AWG allowing connectors to transfer up to 12 A and 630 Vac. Both male and female models have 4 gold-plated contacts with screw termination for in-field wire attachment. When mated and locked, connectors are IP67 rated, ensuring protection from liquids and debris. Units accommodate cables with overall diameters from 8–10 mm.

Read More »
Subminiature Snap-in Connectors have color-coded design.
Construction Equipment and Supplies

Subminiature Snap-in Connectors have color-coded design.

Comprised of snap-in connectors, Series 620 includes color-coded (red, blue, and green) plugs and receptacles that help prevent accidental mis-mating in instances where several connectors are installed on same equipment. Male and female connectors, with 11.5 mm OD, are offered as cable- or panel-mounted versions, with 3, 4, 5, or 8 gold-plated solder contacts. When fully mated, connection has...

Read More »
M12 Power Connectors feature T-coding to prevent mismatching.
Construction Equipment and Supplies

M12 Power Connectors feature T-coding to prevent mismatching.

Suitable for power supplies in automation technology, Series 813 features 4 gold-plated contacts, which allow wire cross-section of 1.5 mmÂ-² or 16 AWG, and can transfer up to 12 A at 60 Vdc. Field-attachable connectors accept cables from 8-10 mm dia. When fully mated and locked, units are IP67-rated, ensuring protection from liquids and debris. Male and female connectors are available with...

Read More »
M12 Panel Mount Connectors feature screw terminations.
Construction Equipment and Supplies

M12 Panel Mount Connectors feature screw terminations.

Suited for signal/power applications requiring solderless assembly, Series 713 and 763 have screw terminations that enable wires to be attached in field without special tooling or soldering. Connectors are offered with 4, 5, and 8 gold-plated contacts in male and female versions, and screw terminations accept 16 AWG max wire gauge and transmit currents up to 8 A. To determine direction of angled...

Read More »
Construction Equipment and Supplies

M8 and M12 Cordsets are offered with custom options.

Suited for wide range of applications in nearly any industry, M8 and M12 Cordsets are available in single-ended and double-ended models with straight and right-angle connectors. Both sizes can accept 3-8 wires, and M12 connectors are available with A-, B-, and D-coding options. In addition, variety of cable types can be used to fit environmental conditions, including high-flex, abrasion immune,...

Read More »
Molded Eight-Pin M8 Cordsets meet automation industry needs.
Electrical Equipment & Systems

Molded Eight-Pin M8 Cordsets meet automation industry needs.

Rated IP67 when fully mated to connecting parts, molded 8-pin M8 cordsets enable transmission up to 8 signals from connector with 9.7 mm dia. Cordsets have open cable end, and cables are available in PVC or PUR with cross-section of 0.25 mmÂ-² (24 AWG) and 2, 5, or 10 m lengths. Custom wire sizes, lengths, and materials are also available. Each cordset has 8 gold-plated contacts, rated...

Read More »
Single-Ended M12 Profinet Connectors feature overmolded cable.
Construction Equipment and Supplies

Single-Ended M12 Profinet Connectors feature overmolded cable.

Adopting standard Profinet design, Series 876 D-Coded connectors are available in male or female versions with 4 gold-plated contacts and in 2, 5, and 10 m lengths. Each connector is molded to shielded polyurethane (PUR) cable, which consists of 22 AWG wires; other cable types and lengths are available upon request. Rated current is 4 A per contact, and total rated voltage is 250 V. When fully...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers